lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Thu, 18 Feb 2016 16:56:40 +0100
From:	Matthias Brugger <matthias.bgg@...il.com>
To:	Eduardo Valentin <edubezval@...il.com>, s.hauer@...gutronix.de
Cc:	linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-mediatek@...ts.infradead.org, kernel@...gutronix.de,
	rui.zhang@...el.com, linux-arm-kernel@...ts.infradead.org,
	djkurtz@...omium.org, eddie.huang@...iatek.com
Subject: Re: [PATCH 1/1] thermal: small style cleanup in mtk_thermal



On 18/02/16 16:50, Eduardo Valentin wrote:
> Remove all checkpatch.pl --strict errors, checks, and warnings.
>
> Cc: Zhang Rui <rui.zhang@...el.com>
> Cc: Matthias Brugger <matthias.bgg@...il.com>
> Cc: linux-pm@...r.kernel.org
> Cc: linux-arm-kernel@...ts.infradead.org
> Cc: linux-mediatek@...ts.infradead.org
> Cc: linux-kernel@...r.kernel.org
> Signed-off-by: Eduardo Valentin <edubezval@...il.com>
> ---

Reviewed-by: Matthias Brugger <matthias.bgg@...il.com>

> Sascha,
>
> Add your v12 in my forlinus branch. But also, on top of it
> I cleaned the patch further with the following patch.
>
> BR,
>
> Eduardo
>
>   drivers/thermal/mtk_thermal.c | 56 ++++++++++++++++++++++---------------------
>   1 file changed, 29 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
> index 589a138..3d93b1c 100644
> --- a/drivers/thermal/mtk_thermal.c
> +++ b/drivers/thermal/mtk_thermal.c
> @@ -78,7 +78,7 @@
>
>   #define TEMP_MONCTL1_PERIOD_UNIT(x)	((x) & 0x3ff)
>
> -#define TEMP_MONCTL2_FILTER_INTERVAL(x)	(((x) & 0x3ff)) << 16
> +#define TEMP_MONCTL2_FILTER_INTERVAL(x)	(((x) & 0x3ff) << 16)
>   #define TEMP_MONCTL2_SENSOR_INTERVAL(x)	((x) & 0x3ff)
>
>   #define TEMP_AHBPOLL_ADC_POLL_INTERVAL(x)	(x)
> @@ -108,15 +108,15 @@
>   #define MT8173_NUM_SENSORS_PER_ZONE	4
>
>   /* Layout of the fuses providing the calibration data */
> -#define MT8173_CALIB_BUF0_VALID		(1 << 0)
> -#define MT8173_CALIB_BUF1_ADC_GE(x)	(((x) >> 22 ) & 0x3ff)
> -#define MT8173_CALIB_BUF0_VTS_TS1(x)	(((x) >> 17 ) & 0x1ff)
> -#define MT8173_CALIB_BUF0_VTS_TS2(x)	(((x) >> 8 ) & 0x1ff)
> -#define MT8173_CALIB_BUF1_VTS_TS3(x)	(((x) >> 0 ) & 0x1ff)
> -#define MT8173_CALIB_BUF2_VTS_TS4(x)	(((x) >> 23 ) & 0x1ff)
> -#define MT8173_CALIB_BUF2_VTS_TSABB(x)	(((x) >> 14 ) & 0x1ff)
> -#define MT8173_CALIB_BUF0_DEGC_CALI(x)	(((x) >> 1 ) & 0x3f)
> -#define MT8173_CALIB_BUF0_O_SLOPE(x)	(((x) >> 26 ) & 0x3f)
> +#define MT8173_CALIB_BUF0_VALID		BIT(0)
> +#define MT8173_CALIB_BUF1_ADC_GE(x)	(((x) >> 22) & 0x3ff)
> +#define MT8173_CALIB_BUF0_VTS_TS1(x)	(((x) >> 17) & 0x1ff)
> +#define MT8173_CALIB_BUF0_VTS_TS2(x)	(((x) >> 8) & 0x1ff)
> +#define MT8173_CALIB_BUF1_VTS_TS3(x)	(((x) >> 0) & 0x1ff)
> +#define MT8173_CALIB_BUF2_VTS_TS4(x)	(((x) >> 23) & 0x1ff)
> +#define MT8173_CALIB_BUF2_VTS_TSABB(x)	(((x) >> 14) & 0x1ff)
> +#define MT8173_CALIB_BUF0_DEGC_CALI(x)	(((x) >> 1) & 0x3f)
> +#define MT8173_CALIB_BUF0_O_SLOPE(x)	(((x) >> 26) & 0x3f)
>
>   #define THERMAL_NAME    "mtk-thermal"
>
> @@ -136,6 +136,7 @@ struct mtk_thermal {
>
>   	struct mtk_thermal_bank banks[MT8173_NUM_ZONES];
>
> +	/* lock: for getting and putting banks */
>   	struct mutex lock;
>
>   	/* Calibration values */
> @@ -271,11 +272,9 @@ static void mtk_thermal_put_bank(struct mtk_thermal_bank *bank)
>   static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
>   {
>   	struct mtk_thermal *mt = bank->mt;
> -	int temp, i, max;
> +	int i, temp = INT_MIN, max = INT_MIN;
>   	u32 raw;
>
> -	temp = max = INT_MIN;
> -
>   	for (i = 0; i < bank_data[bank->id].num_sensors; i++) {
>   		raw = readl(mt->thermal_base + sensing_points[i].msr);
>
> @@ -322,7 +321,7 @@ static const struct thermal_zone_of_device_ops mtk_thermal_ops = {
>   };
>
>   static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
> -		u32 apmixed_phys_base, u32 auxadc_phys_base)
> +				  u32 apmixed_phys_base, u32 auxadc_phys_base)
>   {
>   	struct mtk_thermal_bank *bank = &mt->banks[num];
>   	const struct mtk_thermal_bank_cfg *cfg = &bank_data[num];
> @@ -346,7 +345,7 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
>
>   	/* poll is set to 10u */
>   	writel(TEMP_AHBPOLL_ADC_POLL_INTERVAL(768),
> -			mt->thermal_base + TEMP_AHBPOLL);
> +	       mt->thermal_base + TEMP_AHBPOLL);
>
>   	/* temperature sampling control, 1 sample */
>   	writel(0x0, mt->thermal_base + TEMP_MSRCTL0);
> @@ -375,49 +374,50 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
>
>   	/* AHB address for auxadc mux selection */
>   	writel(auxadc_phys_base + AUXADC_CON1_CLR_V,
> -			mt->thermal_base + TEMP_ADCMUXADDR);
> +	       mt->thermal_base + TEMP_ADCMUXADDR);
>
>   	/* AHB address for pnp sensor mux selection */
>   	writel(apmixed_phys_base + APMIXED_SYS_TS_CON1,
> -			mt->thermal_base + TEMP_PNPMUXADDR);
> +	       mt->thermal_base + TEMP_PNPMUXADDR);
>
>   	/* AHB value for auxadc enable */
>   	writel(BIT(MT8173_TEMP_AUXADC_CHANNEL), mt->thermal_base + TEMP_ADCEN);
>
>   	/* AHB address for auxadc enable (channel 0 immediate mode selected) */
>   	writel(auxadc_phys_base + AUXADC_CON1_SET_V,
> -			mt->thermal_base + TEMP_ADCENADDR);
> +	       mt->thermal_base + TEMP_ADCENADDR);
>
>   	/* AHB address for auxadc valid bit */
>   	writel(auxadc_phys_base + AUXADC_DATA(MT8173_TEMP_AUXADC_CHANNEL),
> -			mt->thermal_base + TEMP_ADCVALIDADDR);
> +	       mt->thermal_base + TEMP_ADCVALIDADDR);
>
>   	/* AHB address for auxadc voltage output */
>   	writel(auxadc_phys_base + AUXADC_DATA(MT8173_TEMP_AUXADC_CHANNEL),
> -			mt->thermal_base + TEMP_ADCVOLTADDR);
> +	       mt->thermal_base + TEMP_ADCVOLTADDR);
>
>   	/* read valid & voltage are at the same register */
>   	writel(0x0, mt->thermal_base + TEMP_RDCTRL);
>
>   	/* indicate where the valid bit is */
>   	writel(TEMP_ADCVALIDMASK_VALID_HIGH | TEMP_ADCVALIDMASK_VALID_POS(12),
> -			mt->thermal_base + TEMP_ADCVALIDMASK);
> +	       mt->thermal_base + TEMP_ADCVALIDMASK);
>
>   	/* no shift */
>   	writel(0x0, mt->thermal_base + TEMP_ADCVOLTAGESHIFT);
>
>   	/* enable auxadc mux write transaction */
>   	writel(TEMP_ADCWRITECTRL_ADC_MUX_WRITE,
> -			mt->thermal_base + TEMP_ADCWRITECTRL);
> +	       mt->thermal_base + TEMP_ADCWRITECTRL);
>
>   	for (i = 0; i < cfg->num_sensors; i++)
>   		writel(sensor_mux_values[cfg->sensors[i]],
> -				mt->thermal_base + sensing_points[i].adcpnp);
> +		       mt->thermal_base + sensing_points[i].adcpnp);
>
>   	writel((1 << cfg->num_sensors) - 1, mt->thermal_base + TEMP_MONCTL0);
>
> -	writel(TEMP_ADCWRITECTRL_ADC_PNP_WRITE | TEMP_ADCWRITECTRL_ADC_MUX_WRITE,
> -			mt->thermal_base + TEMP_ADCWRITECTRL);
> +	writel(TEMP_ADCWRITECTRL_ADC_PNP_WRITE |
> +	       TEMP_ADCWRITECTRL_ADC_MUX_WRITE,
> +	       mt->thermal_base + TEMP_ADCWRITECTRL);
>
>   	mtk_thermal_put_bank(bank);
>   }
> @@ -434,7 +434,8 @@ static u64 of_get_phys_base(struct device_node *np)
>   	return of_translate_address(np, regaddr_p);
>   }
>
> -static int mtk_thermal_get_calibration_data(struct device *dev, struct mtk_thermal *mt)
> +static int mtk_thermal_get_calibration_data(struct device *dev,
> +					    struct mtk_thermal *mt)
>   {
>   	struct nvmem_cell *cell;
>   	u32 *buf;
> @@ -567,7 +568,8 @@ static int mtk_thermal_probe(struct platform_device *pdev)
>   	}
>
>   	for (i = 0; i < MT8173_NUM_ZONES; i++)
> -		mtk_thermal_init_bank(mt, i, apmixed_phys_base, auxadc_phys_base);
> +		mtk_thermal_init_bank(mt, i, apmixed_phys_base,
> +				      auxadc_phys_base);
>
>   	platform_set_drvdata(pdev, mt);
>
>

Powered by blists - more mailing lists