| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <5c806ca29340923831e05a729bbb6557d7ce83cb.1455549222.git.jpinto@synopsys.com>
Date: Thu, 18 Feb 2016 17:20:27 +0000
From: Joao Pinto <Joao.Pinto@...opsys.com>
To: vinholikatti@...il.com, julian.calaby@...il.com,
akinobu.mita@...il.com, hch@...radead.org, arnd@...db.de,
mark.rutland@....com, robh@...nel.org
Cc: gbroner@...eaurora.org, subhashj@...eaurora.org,
CARLOS.PALMINHA@...opsys.com, ijc+devicetree@...lion.org.uk,
linux-kernel@...r.kernel.org, linux-scsi@...r.kernel.org,
devicetree@...r.kernel.org, Joao Pinto <Joao.Pinto@...opsys.com>
Subject: [PATCH v9 3/3] add support for DWC UFS Host Controller
This patch has the goal to add support for DesignWare UFS Controller
specific operations and to add specific platform and pci drivers.
Signed-off-by: Joao Pinto <jpinto@...opsys.com>
---
Changes v8->v9 (Robert Herring):
- drop 0x in the node declaration
- most specific compatibility string declared first
Changes v7->v8 (Akinobu Mita):
- DME sets were simplified for easier reading
- CLK DIV default values definitions names were changed to match the
register's name
- New line added to dev_err and dev_info statements
Changes v6->v7 (Arnd Bergmann):
- Changed DT node name (to ufs only) and the memory address (to 0xd000000)
- Removed CONFIG_PM from the PCI glue driver (pm.h already does this)
- No other changes are necessary in ufshcd.c because of the link up notify
function usage (it is simpler now)
- Removed the PHY mentioning since the Test Chip is not a real PHY for real
world usage, since it is a test chip for prototyping with a very specific
usage
- Added again the Test Chip 20-bit option
Changes v5->v6:
- Patch bad format fixed
Changes v4->v5 (Akinobu Mita):
- All functions used only locally in ufshcd-dwc are now declared as static
- ufshcd_dwc_configuration() was removed in ufshcd-dwc and a notify
function (ufshcd_dwc_link_startup_notify) was created to deal with the
DWC specific init routines
- 20-bit RMMI option was removed from Kconfig. Now if MPHY TC is selected
and 40-bit is not then it assumes a 20-bit config
Changes v3->v4 (Arnd Bergmann and Mark Rutland):
- SCSI_UFS_DWC_HOOKS is now silent and selected by the SCSI_UFS_DWC_PLAT
or SCSI_UFS_DWC_PCI
- Compatibility string has the ufs core version for info purposes since
the driver is capable of getting the controller version from its
registers
- Created ufs-dwc-pci glue driver with specific DWC data
- MPHY configuration remains in the ufshcd-dwc since it is unipro
attribute writting only not following the a linux phy framework logic
Changes v2->v3 (Julian Calaby):
- Implement a common DWC code to be used by the platform and pci glue
drivers
- Synopsys ID & Class added to the existing pci driver and specific DWC
was also added to the pci driver
Changes v1->v2 (Akinobu Mita):
- Implement a platform driver that uses the existing UFS core driver
- Add DWC specific code to the existing UFS core driver
Documentation/devicetree/bindings/ufs/ufs-dwc.txt | 19 +
MAINTAINERS | 6 +
drivers/scsi/ufs/Kconfig | 51 +++
drivers/scsi/ufs/Makefile | 3 +
drivers/scsi/ufs/ufs-dwc-pci.c | 172 +++++++++
drivers/scsi/ufs/ufs-dwc.c | 96 +++++
drivers/scsi/ufs/ufshcd-dwc.c | 431 ++++++++++++++++++++++
drivers/scsi/ufs/ufshcd-dwc.h | 18 +
drivers/scsi/ufs/ufshci-dwc.h | 42 +++
drivers/scsi/ufs/unipro.h | 39 ++
10 files changed, 877 insertions(+)
create mode 100644 Documentation/devicetree/bindings/ufs/ufs-dwc.txt
create mode 100644 drivers/scsi/ufs/ufs-dwc-pci.c
create mode 100644 drivers/scsi/ufs/ufs-dwc.c
create mode 100644 drivers/scsi/ufs/ufshcd-dwc.c
create mode 100644 drivers/scsi/ufs/ufshcd-dwc.h
create mode 100644 drivers/scsi/ufs/ufshci-dwc.h
diff --git a/Documentation/devicetree/bindings/ufs/ufs-dwc.txt b/Documentation/devicetree/bindings/ufs/ufs-dwc.txt
new file mode 100644
index 0000000..59e9822
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/ufs-dwc.txt
@@ -0,0 +1,19 @@
+* Universal Flash Storage (UFS) DesignWare Host Controller
+
+DWC_UFSHC nodes are defined to describe on-chip UFS host controllers.
+Each UFS controller instance should have its own node.
+
+Required properties:
+- compatible : compatible list must contain "snps,ufshcd-dwc" and should
+ also contain the JEDEC version of the controller:
+ "jedec,ufs-1.1"
+ "jedec,ufs-2.0"
+- reg : <registers mapping>
+- interrupts : <interrupt mapping for UFS host controller IRQ>
+
+Example:
+ ufs@...00000 {
+ compatible = "snps,dwc-ufshcd", "jedec,ufs-2.0";
+ reg = < 0xd0000000 0x10000 >;
+ interrupts = < 24 >;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index d2f94e2..3db3c4c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11006,6 +11006,12 @@ S: Supported
F: Documentation/scsi/ufs.txt
F: drivers/scsi/ufs/
+UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER DWC HOOKS
+M: Joao Pinto <Joao.Pinto@...opsys.com>
+L: linux-scsi@...r.kernel.org
+S: Supported
+F: drivers/scsi/ufs/*dwc*
+
UNSORTED BLOCK IMAGES (UBI)
M: Artem Bityutskiy <dedekind1@...il.com>
M: Richard Weinberger <richard@....at>
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index 5f45307..35e9ddf 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -83,3 +83,54 @@ config SCSI_UFS_QCOM
Select this if you have UFS controller on QCOM chipset.
If unsure, say N.
+
+config SCSI_UFS_DWC_HOOKS
+ bool
+
+config SCSI_UFS_DWC_PLAT
+ tristate "DesignWare UFS controller platform glue driver"
+ depends on SCSI_UFSHCD_PLATFORM
+ select SCSI_UFS_DWC_HOOKS
+ help
+ This selects the DesignWare UFS host controller platform glue driver.
+
+ Select this if you have a DesignWare UFS controller on Platform bus.
+ If unsure, say N.
+
+config SCSI_UFS_DWC_PCI
+ tristate "DesignWare UFS controller pci glue driver"
+ depends on SCSI_UFSHCD_PCI
+ select SCSI_UFS_DWC_HOOKS
+ help
+ This selects the DesignWare UFS host controller pci glue driver.
+
+ Select this if you have a DesignWare UFS controller on pci bus.
+ If unsure, say N.
+
+config SCSI_UFS_DWC_TC
+ bool "Support for the Synopsys Test Chip"
+ depends on SCSI_UFS_DWC_HOOKS && (SCSI_UFSHCD_PCI || SCSI_UFS_DWC_PLAT)
+ ---help---
+ Synopsys Test Chip is a Phy for prototyping purposes.
+ This selects the support for the Synopsys Test Chip.
+
+ Select this if you have a Synopsys Test Chip.
+ If unsure, say N.
+
+config SCSI_UFS_DWC_20BIT_RMMI
+ bool "20-bit RMMI support"
+ depends on SCSI_UFS_DWC_TC
+ ---help---
+ This specifies that the Synopsys Test Chip supports 20-bit RMMI.
+
+ Select this if you are using a 20-bit RMMI Synopsys Test Chip.
+ If unsure, say N.
+
+config SCSI_UFS_DWC_40BIT_RMMI
+ bool "40-bit RMMI support"
+ depends on SCSI_UFS_DWC_TC
+ ---help---
+ Synopsys Test Chip is a Phy for prototyping purposes.
+
+ Select this if you are using a 40-bit RMMI Synopsys Test Chip.
+ If unsure, say N.
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
index 8303bcc..bab8c05 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/scsi/ufs/Makefile
@@ -1,4 +1,7 @@
# UFSHCD makefile
+obj-$(CONFIG_SCSI_UFS_DWC_HOOKS) += ufshcd-dwc.o
+obj-$(CONFIG_SCSI_UFS_DWC_PLAT) += ufs-dwc.o
+obj-$(CONFIG_SCSI_UFS_DWC_PCI) += ufs-dwc-pci.o
obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
diff --git a/drivers/scsi/ufs/ufs-dwc-pci.c b/drivers/scsi/ufs/ufs-dwc-pci.c
new file mode 100644
index 0000000..845eb7e
--- /dev/null
+++ b/drivers/scsi/ufs/ufs-dwc-pci.c
@@ -0,0 +1,172 @@
+/*
+ * UFS Host driver for Synopsys Designware Core
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <jpinto@...opsys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "ufshcd.h"
+#include "ufshcd-dwc.h"
+
+#include <linux/pci.h>
+#include <linux/pm_runtime.h>
+
+/**
+ * ufs_dw_pci_suspend - suspend power management function
+ * @pdev: pointer to PCI device handle
+ * @state: power state
+ *
+ * Returns 0 if successful
+ * Returns non-zero otherwise
+ */
+static int ufs_dw_pci_suspend(struct device *dev)
+{
+ return ufshcd_system_suspend(dev_get_drvdata(dev));
+}
+
+/**
+ * ufs_dw_pci_resume - resume power management function
+ * @pdev: pointer to PCI device handle
+ *
+ * Returns 0 if successful
+ * Returns non-zero otherwise
+ */
+static int ufs_dw_pci_resume(struct device *dev)
+{
+ return ufshcd_system_resume(dev_get_drvdata(dev));
+}
+
+static int ufs_dw_pci_runtime_suspend(struct device *dev)
+{
+ return ufshcd_runtime_suspend(dev_get_drvdata(dev));
+}
+static int ufs_dw_pci_runtime_resume(struct device *dev)
+{
+ return ufshcd_runtime_resume(dev_get_drvdata(dev));
+}
+static int ufs_dw_pci_runtime_idle(struct device *dev)
+{
+ return ufshcd_runtime_idle(dev_get_drvdata(dev));
+}
+
+/**
+ * struct ufs_hba_dwc_vops - UFS DWC specific variant operations
+ */
+static struct ufs_hba_variant_ops ufs_dwc_pci_hba_vops = {
+ .name = "ufshcd-dwc-pci",
+ .link_startup_notify = ufshcd_dwc_link_startup_notify,
+};
+
+/**
+ * ufs_dw_pci_shutdown - main function to put the controller in reset state
+ * @pdev: pointer to PCI device handle
+ */
+static void ufs_dw_pci_shutdown(struct pci_dev *pdev)
+{
+ ufshcd_shutdown((struct ufs_hba *)pci_get_drvdata(pdev));
+}
+
+/**
+ * ufs_dw_pci_remove - de-allocate PCI/SCSI host and host memory space
+ * data structure memory
+ * @pdev - pointer to PCI handle
+ */
+static void ufs_dw_pci_remove(struct pci_dev *pdev)
+{
+ struct ufs_hba *hba = pci_get_drvdata(pdev);
+
+ pm_runtime_forbid(&pdev->dev);
+ pm_runtime_get_noresume(&pdev->dev);
+ ufshcd_remove(hba);
+}
+
+/**
+ * ufs_dw_pci_probe - probe routine of the driver
+ * @pdev: pointer to PCI device handle
+ * @id: PCI device id
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int
+ufs_dw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct ufs_hba *hba;
+ void __iomem *mmio_base;
+ int err;
+
+ err = pcim_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "pcim_enable_device failed\n");
+ return err;
+ }
+
+ pci_set_master(pdev);
+
+ err = pcim_iomap_regions(pdev, 1 << 0, UFSHCD);
+ if (err < 0) {
+ dev_err(&pdev->dev, "request and iomap failed\n");
+ return err;
+ }
+
+ mmio_base = pcim_iomap_table(pdev)[0];
+
+ err = ufshcd_alloc_host(&pdev->dev, &hba);
+ if (err) {
+ dev_err(&pdev->dev, "Allocation failed\n");
+ return err;
+ }
+
+ INIT_LIST_HEAD(&hba->clk_list_head);
+
+ hba->vops = &ufs_dwc_pci_hba_vops;
+
+ err = ufshcd_init(hba, mmio_base, pdev->irq);
+ if (err) {
+ dev_err(&pdev->dev, "Initialization failed\n");
+ return err;
+ }
+
+ pci_set_drvdata(pdev, hba);
+ pm_runtime_put_noidle(&pdev->dev);
+ pm_runtime_allow(&pdev->dev);
+
+ return 0;
+}
+
+static const struct dev_pm_ops ufs_dw_pci_pm_ops = {
+ .suspend = ufs_dw_pci_suspend,
+ .resume = ufs_dw_pci_resume,
+ .runtime_suspend = ufs_dw_pci_runtime_suspend,
+ .runtime_resume = ufs_dw_pci_runtime_resume,
+ .runtime_idle = ufs_dw_pci_runtime_idle,
+};
+
+static const struct pci_device_id ufs_dw_pci_tbl[] = {
+ { PCI_VENDOR_ID_SYNOPSYS, 0xB101, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { PCI_VENDOR_ID_SYNOPSYS, 0xB102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { } /* terminate list */
+};
+
+MODULE_DEVICE_TABLE(pci, ufs_dw_pci_tbl);
+
+static struct pci_driver ufs_dw_pci_driver = {
+ .name = UFSHCD,
+ .id_table = ufs_dw_pci_tbl,
+ .probe = ufs_dw_pci_probe,
+ .remove = ufs_dw_pci_remove,
+ .shutdown = ufs_dw_pci_shutdown,
+ .driver = {
+ .pm = &ufs_dw_pci_pm_ops
+ },
+};
+
+module_pci_driver(ufs_dw_pci_driver);
+
+MODULE_AUTHOR("Joao Pinto <Joao.Pinto@...opsys.com>");
+MODULE_DESCRIPTION("DesignWare UFS host controller PCI glue driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/scsi/ufs/ufs-dwc.c b/drivers/scsi/ufs/ufs-dwc.c
new file mode 100644
index 0000000..cf4ee2b
--- /dev/null
+++ b/drivers/scsi/ufs/ufs-dwc.c
@@ -0,0 +1,96 @@
+/*
+ * UFS Host driver for Synopsys Designware Core
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <jpinto@...opsys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/delay.h>
+
+#include "ufshcd-pltfrm.h"
+#include "ufshcd-dwc.h"
+
+/**
+ * struct ufs_hba_dwc_vops - UFS DWC specific variant operations
+ *
+ */
+static struct ufs_hba_variant_ops ufs_dwc_hba_vops = {
+ .name = "ufshcd-dwc",
+ .link_startup_notify = ufshcd_dwc_link_startup_notify,
+};
+
+/**
+ * ufs_dwc_probe()
+ * @pdev: pointer to platform device structure
+ *
+ */
+static int ufs_dwc_probe(struct platform_device *pdev)
+{
+ int err;
+ struct device *dev = &pdev->dev;
+
+ /* Perform generic probe */
+ err = ufshcd_pltfrm_init(pdev, &ufs_dwc_hba_vops);
+ if (err)
+ dev_err(dev, "ufshcd_pltfrm_init() failed %d\n", err);
+
+ return err;
+}
+
+/**
+ * ufs_dwc_remove()
+ * @pdev: pointer to platform device structure
+ *
+ */
+static int ufs_dwc_remove(struct platform_device *pdev)
+{
+ struct ufs_hba *hba = platform_get_drvdata(pdev);
+
+ pm_runtime_get_sync(&(pdev)->dev);
+ ufshcd_remove(hba);
+
+ return 0;
+}
+
+static const struct of_device_id ufs_dwc_match[] = {
+ {
+ .compatible = "snps,ufshcd-dwc"
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ufs_dwc_match);
+
+static const struct dev_pm_ops ufs_dwc_pm_ops = {
+ .suspend = ufshcd_pltfrm_suspend,
+ .resume = ufshcd_pltfrm_resume,
+ .runtime_suspend = ufshcd_pltfrm_runtime_suspend,
+ .runtime_resume = ufshcd_pltfrm_runtime_resume,
+ .runtime_idle = ufshcd_pltfrm_runtime_idle,
+};
+
+static struct platform_driver ufs_dwc_driver = {
+ .probe = ufs_dwc_probe,
+ .remove = ufs_dwc_remove,
+ .shutdown = ufshcd_pltfrm_shutdown,
+ .driver = {
+ .name = "ufshcd-dwc",
+ .pm = &ufs_dwc_pm_ops,
+ .of_match_table = of_match_ptr(ufs_dwc_match),
+ },
+};
+
+module_platform_driver(ufs_dwc_driver);
+
+MODULE_ALIAS("platform:ufshcd-dwc");
+MODULE_DESCRIPTION("DesignWare UFS Host platform glue driver");
+MODULE_AUTHOR("Joao Pinto <Joao.Pinto@...opsys.com>");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/scsi/ufs/ufshcd-dwc.c b/drivers/scsi/ufs/ufshcd-dwc.c
new file mode 100644
index 0000000..46a8300
--- /dev/null
+++ b/drivers/scsi/ufs/ufshcd-dwc.c
@@ -0,0 +1,431 @@
+/*
+ * UFS Host driver for Synopsys Designware Core
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <jpinto@...opsys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "ufshcd.h"
+#include "unipro.h"
+
+#include "ufshcd-dwc.h"
+#include "ufshci-dwc.h"
+
+struct ufshcd_dme_attr_val {
+ u32 attr_sel;
+ u32 mib_val;
+ u8 peer;
+};
+
+int ufshcd_dme_set_attrs(struct ufs_hba *hba,
+ const struct ufshcd_dme_attr_val *v, int n)
+{
+ int ret = 0;
+ int attr_node = 0;
+
+ for (attr_node = 0; attr_node < n; attr_node++) {
+ ret = ufshcd_dme_set_attr(hba, v[attr_node].attr_sel,
+ ATTR_SET_NOR, v[attr_node].mib_val, v[attr_node].peer);
+
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * ufshcd_dwc_program_clk_div()
+ * This function programs the clk divider value. This value is needed to
+ * provide 1 microsecond tick to unipro layer.
+ * @hba: Private Structure pointer
+ * @divider_val: clock divider value to be programmed
+ *
+ */
+static void ufshcd_dwc_program_clk_div(struct ufs_hba *hba, u32 divider_val)
+{
+ ufshcd_writel(hba, divider_val, DWC_UFS_REG_HCLKDIV);
+}
+
+/**
+ * ufshcd_dwc_link_is_up()
+ * Check if link is up
+ * @hba: private structure poitner
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int ufshcd_dwc_link_is_up(struct ufs_hba *hba)
+{
+ int dme_result = 0;
+
+ ufshcd_dme_get(hba, UIC_ARG_MIB(VS_POWERSTATE), &dme_result);
+
+ if (dme_result == UFSHCD_LINK_IS_UP) {
+ ufshcd_set_link_active(hba);
+ return 0;
+ }
+
+ return 1;
+}
+
+/**
+ * ufshcd_dwc_connection_setup()
+ * This function configures both the local side (host) and the peer side
+ * (device) unipro attributes to establish the connection to application/
+ * cport.
+ * This function is not required if the hardware is properly configured to
+ * have this connection setup on reset. But invoking this function does no
+ * harm and should be fine even working with any ufs device.
+ *
+ * @hba: pointer to drivers private data
+ *
+ * Returns 0 on success non-zero value on failure
+ */
+static int ufshcd_dwc_connection_setup(struct ufs_hba *hba)
+{
+ const struct ufshcd_dme_attr_val setup_attrs[] = {
+ { UIC_ARG_MIB(T_CONNECTIONSTATE), 0, DME_LOCAL },
+ { UIC_ARG_MIB(N_DEVICEID), 0, DME_LOCAL },
+ { UIC_ARG_MIB(N_DEVICEID_VALID), 0, DME_LOCAL },
+ { UIC_ARG_MIB(T_PEERDEVICEID), 1, DME_LOCAL },
+ { UIC_ARG_MIB(T_PEERCPORTID), 0, DME_LOCAL },
+ { UIC_ARG_MIB(T_TRAFFICCLASS), 0, DME_LOCAL },
+ { UIC_ARG_MIB(T_CPORTFLAGS), 0x6, DME_LOCAL },
+ { UIC_ARG_MIB(T_CPORTMODE), 1, DME_LOCAL },
+ { UIC_ARG_MIB(T_CONNECTIONSTATE), 1, DME_LOCAL },
+ { UIC_ARG_MIB(T_CONNECTIONSTATE), 0, DME_PEER },
+ { UIC_ARG_MIB(N_DEVICEID), 1, DME_PEER },
+ { UIC_ARG_MIB(N_DEVICEID_VALID), 1, DME_PEER },
+ { UIC_ARG_MIB(T_PEERDEVICEID), 1, DME_PEER },
+ { UIC_ARG_MIB(T_PEERCPORTID), 0, DME_PEER },
+ { UIC_ARG_MIB(T_TRAFFICCLASS), 0, DME_PEER },
+ { UIC_ARG_MIB(T_CPORTFLAGS), 0x6, DME_PEER },
+ { UIC_ARG_MIB(T_CPORTMODE), 1, DME_PEER },
+ { UIC_ARG_MIB(T_CONNECTIONSTATE), 1, DME_PEER }
+ };
+
+ return ufshcd_dme_set_attrs(hba, setup_attrs, ARRAY_SIZE(setup_attrs));
+}
+
+#ifdef CONFIG_SCSI_UFS_DWC_40BIT_RMMI
+/**
+ * ufshcd_dwc_setup_40bit_rmmi()
+ * This function configures Synopsys TC specific atributes (40-bit RMMI)
+ * @hba: Pointer to drivers structure
+ *
+ * Returns 0 on success or non-zero value on failure
+ */
+static int ufshcd_dwc_setup_40bit_rmmi(struct ufs_hba *hba)
+{
+ const struct ufshcd_dme_attr_val setup_attrs[] = {
+ { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL },
+ { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL },
+ { UIC_ARG_MIB(CDIRECTCTRL6), 0x80, DME_LOCAL },
+ { UIC_ARG_MIB(CBDIVFACTOR), 0x08, DME_LOCAL },
+ { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL },
+ { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL },
+ { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL },
+ { UIC_ARG_MIB_SEL(TX_REFCLKFREQ, SELIND_LN0_TX), 0x01,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL, SELIND_LN0_TX), 0x19,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(CFGEXTRATTR, SELIND_LN0_TX), 0x14,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(DITHERCTRL2, SELIND_LN0_TX), 0xd6,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(RX_REFCLKFREQ, SELIND_LN0_RX), 0x01,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL, SELIND_LN0_RX), 0x19,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(CFGWIDEINLN, SELIND_LN0_RX), 4,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(CFGRXCDR8, SELIND_LN0_RX), 0x80,
+ DME_LOCAL },
+ { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL },
+ { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL },
+ { UIC_ARG_MIB_SEL(CFGRXCDR8, SELIND_LN0_RX), 0x80,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(ENARXDIRECTCFG4, SELIND_LN0_RX), 0x03,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(CFGRXOVR8, SELIND_LN0_RX), 0x16,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(RXDIRECTCTRL2, SELIND_LN0_RX), 0x42,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(ENARXDIRECTCFG3, SELIND_LN0_RX), 0xa4,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(RXCALCTRL, SELIND_LN0_RX), 0x01,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(ENARXDIRECTCFG2, SELIND_LN0_RX), 0x01,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(CFGRXOVR4, SELIND_LN0_RX), 0x28,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(RXSQCTRL, SELIND_LN0_RX), 0x1E,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(CFGRXOVR6, SELIND_LN0_RX), 0x2f,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(CFGRXOVR6, SELIND_LN0_RX), 0x2f,
+ DME_LOCAL },
+ { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL },
+ };
+
+ return ufshcd_dme_set_attrs(hba, setup_attrs, ARRAY_SIZE(setup_attrs));
+}
+
+#endif
+
+#ifdef CONFIG_SCSI_UFS_DWC_20BIT_RMMI
+/**
+ * ufshcd_dwc_setup_20bit_rmmi_lane0()
+ * This function configures Synopsys TC 20-bit RMMI Lane 0
+ * @hba: Pointer to drivers structure
+ *
+ * Returns 0 on success or non-zero value on failure
+ */
+static int ufshcd_dwc_setup_20bit_rmmi_lane0(struct ufs_hba *hba)
+{
+ const struct ufshcd_dme_attr_val setup_attrs[] = {
+ { UIC_ARG_MIB_SEL(TX_REFCLKFREQ, SELIND_LN0_TX), 0x01,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL, SELIND_LN0_TX), 0x19,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL, SELIND_LN0_RX), 0x19,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(CFGEXTRATTR, SELIND_LN0_TX), 0x12,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(DITHERCTRL2, SELIND_LN0_TX), 0xd6,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(RX_REFCLKFREQ, SELIND_LN0_RX), 0x01,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(CFGWIDEINLN, SELIND_LN0_RX), 2,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(CFGRXCDR8, SELIND_LN0_RX), 0x80,
+ DME_LOCAL },
+ { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL },
+ { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL },
+ { UIC_ARG_MIB_SEL(ENARXDIRECTCFG4, SELIND_LN0_RX), 0x03,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(CFGRXOVR8, SELIND_LN0_RX), 0x16,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(RXDIRECTCTRL2, SELIND_LN0_RX), 0x42,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(ENARXDIRECTCFG3, SELIND_LN0_RX), 0xa4,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(RXCALCTRL, SELIND_LN0_RX), 0x01,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(ENARXDIRECTCFG2, SELIND_LN0_RX), 0x01,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(CFGRXOVR4, SELIND_LN0_RX), 0x28,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(RXSQCTRL, SELIND_LN0_RX), 0x1E,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(CFGRXOVR6, SELIND_LN0_RX), 0x2f,
+ DME_LOCAL },
+ { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL },
+ };
+
+ return ufshcd_dme_set_attrs(hba, setup_attrs, ARRAY_SIZE(setup_attrs));
+}
+
+/**
+ * ufshcd_dwc_setup_20bit_rmmi_lane1()
+ * This function configures Synopsys TC 20-bit RMMI Lane 1
+ * @hba: Pointer to drivers structure
+ *
+ * Returns 0 on success or non-zero value on failure
+ */
+static int ufshcd_dwc_setup_20bit_rmmi_lane1(struct ufs_hba *hba)
+{
+ int connected_rx_lanes = 0;
+ int connected_tx_lanes = 0;
+ int ret = 0;
+
+ const struct ufshcd_dme_attr_val setup_tx_attrs[] = {
+ { UIC_ARG_MIB_SEL(TX_REFCLKFREQ, SELIND_LN1_TX), 0x0d,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL, SELIND_LN1_TX), 0x19,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(CFGEXTRATTR, SELIND_LN1_TX), 0x12,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(DITHERCTRL2, SELIND_LN0_TX), 0xd6,
+ DME_LOCAL },
+ };
+
+ const struct ufshcd_dme_attr_val setup_rx_attrs[] = {
+ { UIC_ARG_MIB_SEL(RX_REFCLKFREQ, SELIND_LN1_RX), 0x01,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL, SELIND_LN1_RX), 0x19,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(CFGWIDEINLN, SELIND_LN1_RX), 2,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(CFGRXCDR8, SELIND_LN1_RX), 0x80,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(ENARXDIRECTCFG4, SELIND_LN1_RX), 0x03,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(CFGRXOVR8, SELIND_LN1_RX), 0x16,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(RXDIRECTCTRL2, SELIND_LN1_RX), 0x42,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(ENARXDIRECTCFG3, SELIND_LN1_RX), 0xa4,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(RXCALCTRL, SELIND_LN1_RX), 0x01,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(ENARXDIRECTCFG2, SELIND_LN1_RX), 0x01,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(CFGRXOVR4, SELIND_LN1_RX), 0x28,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(RXSQCTRL, SELIND_LN1_RX), 0x1E,
+ DME_LOCAL },
+ { UIC_ARG_MIB_SEL(CFGRXOVR6, SELIND_LN1_RX), 0x2f,
+ DME_LOCAL },
+ };
+
+ /* Get the available lane count */
+ ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDRXDATALANES),
+ &connected_rx_lanes);
+ ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES),
+ &connected_tx_lanes);
+
+ if (connected_tx_lanes == 2) {
+
+ ret = ufshcd_dme_set_attrs(hba, setup_tx_attrs,
+ ARRAY_SIZE(setup_tx_attrs));
+
+ if (ret)
+ goto out;
+ }
+
+ if (connected_rx_lanes == 2) {
+ ret = ufshcd_dme_set_attrs(hba, setup_rx_attrs,
+ ARRAY_SIZE(setup_rx_attrs));
+ }
+
+out:
+ return ret;
+}
+
+/**
+ * ufshcd_dwc_setup_20bit_rmmi()
+ * This function configures Synopsys TC specific atributes (20-bit RMMI)
+ * @hba: Pointer to drivers structure
+ *
+ * Returns 0 on success or non-zero value on failure
+ */
+static int ufshcd_dwc_setup_20bit_rmmi(struct ufs_hba *hba)
+{
+ int ret = 0;
+
+ const struct ufshcd_dme_attr_val setup_attrs[] = {
+ { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL },
+ { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL },
+ { UIC_ARG_MIB(CDIRECTCTRL6), 0xc0, DME_LOCAL },
+ { UIC_ARG_MIB(CBDIVFACTOR), 0x44, DME_LOCAL },
+ { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL },
+ { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL },
+ { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL },
+ };
+
+ ret = ufshcd_dme_set_attrs(hba, setup_attrs, ARRAY_SIZE(setup_attrs));
+ if (ret)
+ goto out;
+
+ /* Lane 0 configuration*/
+ ret = ufshcd_dwc_setup_20bit_rmmi_lane0(hba);
+ if (ret)
+ goto out;
+
+ /* Lane 1 configuration*/
+ ret = ufshcd_dwc_setup_20bit_rmmi_lane1(hba);
+ if (ret)
+ goto out;
+
+out:
+ return ret;
+}
+#endif
+
+/**
+ * ufshcd_dwc_setup_tc()
+ * This function configures Local (host) Synopsys TC specific attributes
+ *
+ * @hba: Pointer to drivers structure
+ *
+ * Returns 0 on success non-zero value on failure
+ */
+static int ufshcd_dwc_setup_tc(struct ufs_hba *hba)
+{
+ int ret = 0;
+
+#ifdef CONFIG_SCSI_UFS_DWC_40BIT_RMMI
+ dev_info(hba->dev, "Configuring Test Chip 40-bit RMMI\n");
+ ret = ufshcd_dwc_setup_40bit_rmmi(hba);
+ if (ret) {
+ dev_err(hba->dev, "Configuration failed\n");
+ goto out;
+ }
+#endif
+
+#ifdef CONFIG_SCSI_UFS_DWC_20BIT_RMMI
+ dev_info(hba->dev, "Configuring Test Chip 20-bit RMMI\n");
+ ret = ufshcd_dwc_setup_20bit_rmmi(hba);
+ if (ret) {
+ dev_err(hba->dev, "Configuration failed\n");
+ goto out;
+ }
+#endif
+ /* To write Shadow register bank to effective configuration block */
+ ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_MPHYCFGUPDT), 0x01);
+ if (ret)
+ goto out;
+
+ /* To configure Debug OMC */
+ ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_DEBUGOMC), 0x01);
+
+out:
+ return ret;
+}
+
+/**
+ * ufshcd_dwc_link_startup_notify()
+ * UFS Host DWC specific link startup sequence
+ * @hba: private structure poitner
+ * @status: Callback notify status
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+int ufshcd_dwc_link_startup_notify(struct ufs_hba *hba,
+ enum ufs_notify_change_status status)
+{
+ int err = 0;
+
+ if (status == PRE_CHANGE) {
+ ufshcd_dwc_program_clk_div(hba, DWC_UFS_REG_HCLKDIV_DIV_125);
+#ifdef CONFIG_SCSI_UFS_DWC_TC
+ err = ufshcd_dwc_setup_tc(hba);
+ if (err) {
+ dev_err(hba->dev, "Configuration failed (%d)\n",
+ err);
+ goto out;
+ }
+#endif
+ } else { /* POST_CHANGE */
+ err = ufshcd_dwc_link_is_up(hba);
+ if (err) {
+ dev_err(hba->dev, "Link is not up\n");
+ goto out;
+ }
+
+ err = ufshcd_dwc_connection_setup(hba);
+ if (err)
+ dev_err(hba->dev, "Connection setup failed (%d)\n",
+ err);
+ }
+
+out:
+ return err;
+}
+EXPORT_SYMBOL(ufshcd_dwc_link_startup_notify);
diff --git a/drivers/scsi/ufs/ufshcd-dwc.h b/drivers/scsi/ufs/ufshcd-dwc.h
new file mode 100644
index 0000000..ca65ee1
--- /dev/null
+++ b/drivers/scsi/ufs/ufshcd-dwc.h
@@ -0,0 +1,18 @@
+/*
+ * UFS Host driver for Synopsys Designware Core
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <jpinto@...opsys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _UFSHCD_DWC_H
+#define _UFSHCD_DWC_H
+
+int ufshcd_dwc_link_startup_notify(struct ufs_hba *hba,
+ enum ufs_notify_change_status status);
+#endif /* End of Header */
diff --git a/drivers/scsi/ufs/ufshci-dwc.h b/drivers/scsi/ufs/ufshci-dwc.h
new file mode 100644
index 0000000..947a75c
--- /dev/null
+++ b/drivers/scsi/ufs/ufshci-dwc.h
@@ -0,0 +1,42 @@
+/*
+ * UFS Host driver for Synopsys Designware Core
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <jpinto@...opsys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _UFSHCI_DWC_H
+#define _UFSHCI_DWC_H
+
+/* DWC HC UFSHCI specific Registers */
+enum dwc_specific_registers {
+ DWC_UFS_REG_HCLKDIV = 0xFC,
+};
+
+/* Link Status*/
+enum link_status {
+ UFSHCD_LINK_IS_DOWN = 1,
+ UFSHCD_LINK_IS_UP = 2,
+};
+
+/* Clock Divider Values: Hex equivalent of frequency in MHz */
+enum clk_div_values {
+ DWC_UFS_REG_HCLKDIV_DIV_62_5 = 0x3e,
+ DWC_UFS_REG_HCLKDIV_DIV_125 = 0x7d,
+ DWC_UFS_REG_HCLKDIV_DIV_200 = 0xc8,
+};
+
+/* Selector Index */
+enum selector_index {
+ SELIND_LN0_TX = 0x00,
+ SELIND_LN1_TX = 0x01,
+ SELIND_LN0_RX = 0x04,
+ SELIND_LN1_RX = 0x05,
+};
+
+#endif /* End of Header */
diff --git a/drivers/scsi/ufs/unipro.h b/drivers/scsi/ufs/unipro.h
index 816a8a4..da16254 100644
--- a/drivers/scsi/ufs/unipro.h
+++ b/drivers/scsi/ufs/unipro.h
@@ -35,6 +35,10 @@
#define TX_LCC_SEQUENCER 0x0032
#define TX_MIN_ACTIVATETIME 0x0033
#define TX_PWM_G6_G7_SYNC_LENGTH 0x0034
+#define TX_REFCLKFREQ 0x00EB
+#define TX_CFGCLKFREQVAL 0x00EC
+#define CFGEXTRATTR 0x00F0
+#define DITHERCTRL2 0x00F1
/*
* M-RX Configuration Attributes
@@ -48,8 +52,38 @@
#define RX_ENTER_HIBERN8 0x00A7
#define RX_BYPASS_8B10B_ENABLE 0x00A8
#define RX_TERMINATION_FORCE_ENABLE 0x0089
+#define RX_REFCLKFREQ 0x00EB
+#define RX_CFGCLKFREQVAL 0x00EC
+#define CFGWIDEINLN 0x00F0
+#define CFGRXCDR8 0x00BA
+#define ENARXDIRECTCFG4 0x00F2
+#define CFGRXOVR8 0x00BD
+#define RXDIRECTCTRL2 0x00C7
+#define ENARXDIRECTCFG3 0x00F3
+#define RXCALCTRL 0x00B4
+#define ENARXDIRECTCFG2 0x00F4
+#define CFGRXOVR4 0x00E9
+#define RXSQCTRL 0x00B5
+#define CFGRXOVR6 0x00BF
#define is_mphy_tx_attr(attr) (attr < RX_MODE)
+
+/*
+ * Common Block Attributes
+ */
+#define TX_GLOBALHIBERNATE UNIPRO_CB_OFFSET(0x002B)
+#define REFCLKMODE UNIPRO_CB_OFFSET(0x00BF)
+#define DIRECTCTRL19 UNIPRO_CB_OFFSET(0x00CD)
+#define DIRECTCTRL10 UNIPRO_CB_OFFSET(0x00E6)
+#define CDIRECTCTRL6 UNIPRO_CB_OFFSET(0x00EA)
+#define RTOBSERVESELECT UNIPRO_CB_OFFSET(0x00F0)
+#define CBDIVFACTOR UNIPRO_CB_OFFSET(0x00F1)
+#define CBDCOCTRL5 UNIPRO_CB_OFFSET(0x00F3)
+#define CBPRGPLL2 UNIPRO_CB_OFFSET(0x00F8)
+#define CBPRGTUNING UNIPRO_CB_OFFSET(0x00FB)
+
+#define UNIPRO_CB_OFFSET(x) (0x8000 | x)
+
/*
* PHY Adpater attributes
*/
@@ -110,6 +144,11 @@
#define PA_STALLNOCONFIGTIME 0x15A3
#define PA_SAVECONFIGTIME 0x15A4
+/*Other attributes*/
+#define VS_MPHYCFGUPDT 0xD085
+#define VS_DEBUGOMC 0xD09E
+#define VS_POWERSTATE 0xD083
+
/* PA power modes */
enum {
FAST_MODE = 1,
--
1.8.1.5
Powered by blists - more mailing lists