linux-kernel - Applied "regulator: add missing description for set_over_current

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-Id: <E1aij3s-0004Cn-SZ@debutante>
Date:	Wed, 23 Mar 2016 13:43:00 +0000
From:	Mark Brown <broonie@...nel.org>
To:	Luis de Bethencourt <luisbg@....samsung.com>,
	Mark Brown <broonie@...nel.org>
Cc:	linux-kernel@...r.kernel.org
Subject: Applied "regulator: add missing description for set_over_current_protection" to the regulator tree

The patch

   regulator: add missing description for set_over_current_protection

has been applied to the regulator tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From abf2f825d115397944cab91a20c937331d77e37c Mon Sep 17 00:00:00 2001
From: Luis de Bethencourt <luisbg@....samsung.com>
Date: Wed, 23 Mar 2016 11:35:39 +0000
Subject: [PATCH] regulator: add missing description for
 set_over_current_protection

Over current protection is missing descriptions for documentation.

Signed-off-by: Luis de Bethencourt <luisbg@....samsung.com>
Signed-off-by: Mark Brown <broonie@...nel.org>
---
 include/linux/regulator/driver.h  | 3 +++
 include/linux/regulator/machine.h | 1 +
 2 files changed, 4 insertions(+)

diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 01d26244a610..1392022fe509 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -93,6 +93,9 @@ struct regulator_linear_range {
  * @get_current_limit: Get the configured limit for a current-limited regulator.
  * @set_input_current_limit: Configure an input limit.
  *
+ * @set_over_current_protection: Support capability of automatically shutting
+ *                               down when detecting an over current event.
+ *
  * @set_active_discharge: Set active discharge enable/disable of regulators.
  *
  * @set_mode: Set the configured operating mode for the regulator.
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
index 5d627c83a630..ad3e5158e586 100644
--- a/include/linux/regulator/machine.h
+++ b/include/linux/regulator/machine.h
@@ -97,6 +97,7 @@ struct regulator_state {
  * @ramp_disable: Disable ramp delay when initialising or when setting voltage.
  * @soft_start: Enable soft start so that voltage ramps slowly.
  * @pull_down: Enable pull down when regulator is disabled.
+ * @over_current_protection: Auto disable on over current event.
  *
  * @input_uV: Input voltage for regulator when supplied by another regulator.
  *
-- 
2.7.0