[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20160325143950.GA25362@rob-hp-laptop>
Date: Fri, 25 Mar 2016 09:39:50 -0500
From: Rob Herring <robh@...nel.org>
To: Alexey Brodkin <Alexey.Brodkin@...opsys.com>
Cc: dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>, devicetree@...r.kernel.org,
linux-snps-arc@...ts.infradead.org
Subject: Re: [PATCH 2/5 v4] drm: Add DT bindings documentation for ARC PGU
display controller
On Thu, Mar 24, 2016 at 07:48:33PM +0300, Alexey Brodkin wrote:
> This add DT bindings documentation for ARC PGU display controller.
>
> Signed-off-by: Alexey Brodkin <abrodkin@...opsys.com>
> Cc: Rob Herring <robh+dt@...nel.org>
> Cc: Pawel Moll <pawel.moll@....com>
> Cc: Mark Rutland <mark.rutland@....com>
> Cc: Ian Campbell <ijc+devicetree@...lion.org.uk>
> Cc: Kumar Gala <galak@...eaurora.org>
> Cc: devicetree@...r.kernel.org
> Cc: linux-snps-arc@...ts.infradead.org
> ---
>
> Changes v3 -> v4: (addressing Rob's comments)
> * Removed "encoder-slave" from required properties
> * Removed "0x" from node names
>
> Changes v2 -> v3:
> * Reverted back to initial larger version of example
> with minor fixes (thanks Rob for spotting those).
>
> Changes v1 -> v2:
> * Removed everything except PGU node itself.
>
> .../devicetree/bindings/display/snps,arcpgu.txt | 71 ++++++++++++++++++++++
> 1 file changed, 71 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/snps,arcpgu.txt
>
> diff --git a/Documentation/devicetree/bindings/display/snps,arcpgu.txt b/Documentation/devicetree/bindings/display/snps,arcpgu.txt
> new file mode 100644
> index 0000000..b126577
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/snps,arcpgu.txt
> @@ -0,0 +1,71 @@
> +ARC PGU
> +
> +This is a display controller found on several development boards produced
> +by Synopsys. The ARC PGU is an RGB streamer that reads the data from a
> +framebuffer and sends it to a single digital encoder (usually HDMI).
> +
> +Required properties:
> + - compatible: "snps,arcpgu"
> + - reg: Physical base address and length of the controller's registers.
> + - clocks: A list of phandle + clock-specifier pairs, one for each
> + entry in 'clock-names'.
> + - clock-names: A list of clock names. For ARC PGU it should contain:
> + - "pxlclk" for the clock feeding the output PLL of the controller.
> +
> +Required sub-nodes:
> + - port: The PGU connection to an encoder chip.
> +
> +Example:
> +
> +/ {
> + ...
> +
> + pgu@...XXXXX {
> + compatible = "snps,arcpgu";
> + reg = <0xXXXXXXXX 0x400>;
> + clocks = <&clock_node>;
> + clock-names = "pxlclk";
> + encoder-slave = <&encoder_node>;
Still in the example...
Otherwise,
Acked-by: Rob Herring <robh@...nel.org>
Powered by blists - more mailing lists