linux-kernel - Re: [PATCH 09/12] ARM: dts: dragonboard-600c: add on board sata support.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20160329144041.GM8929@tuxbot>
Date:	Tue, 29 Mar 2016 07:40:41 -0700
From:	Bjorn Andersson <bjorn.andersson@...aro.org>
To:	Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Cc:	Andy Gross <andy.gross@...aro.org>, linux-arm-msm@...r.kernel.org,
	devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org, linux-soc@...r.kernel.org
Subject: Re: [PATCH 09/12] ARM: dts: dragonboard-600c: add on board sata
 support.

On Wed 23 Mar 12:47 PDT 2016, Srinivas Kandagatla wrote:

> This patch enables sata and regulators required to get on board sata
> working.
> 

Acked-by: Bjorn Andersson <bjorn.andersson@...aro.org>

Regards,
Bjorn

> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
> ---
>  arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts b/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts
> index d3e6193..52f742c 100644
> --- a/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts
> +++ b/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts
> @@ -135,6 +135,10 @@
>  				lvs6 {
>  					bias-pull-down;
>  				};
> +
> +				lvs7 {
> +					bias-pull-down;
> +				};
>  			};
>  		};
>  
> @@ -171,6 +175,15 @@
>  			perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
>  		};
>  
> +		phy@...00000 {
> +			status = "okay";
> +		};
> +
> +		sata@...00000 {
> +			status	= "okay";
> +			target-supply	= <&pm8921_lvs7>;
> +		};
> +
>  		/* OTG */
>  		phy@...00000 {
>  			status		= "okay";
> -- 
> 2.5.0
>