[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <1459493874-2366-4-git-send-email-k.kozlowski@samsung.com>
Date: Fri, 01 Apr 2016 15:57:47 +0900
From: Krzysztof Kozlowski <k.kozlowski@...sung.com>
To: Rob Herring <robh+dt@...nel.org>, Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Kukjin Kim <kgene@...nel.org>,
Krzysztof Kozlowski <k.kozlowski@...sung.com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-samsung-soc@...r.kernel.org
Subject: [PATCH 04/11] ARM: dts: exynos: Fix DTC unit name warnings in Trats2
board
Fix following DTC warnings in Trats2 board:
Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /i2c-gpio-1/max77693@...regulators/ESAFEOUT1@1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /i2c-gpio-1/max77693@...regulators/ESAFEOUT2@2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /i2c-gpio-1/max77693@...regulators/CHARGER@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /thermistor-ap@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /thermistor-battery@1 has a unit name, but no reg property
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
---
arch/arm/boot/dts/exynos4412-trats2.dts | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 2bf363c3bf62..523627003738 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -29,7 +29,7 @@
i2c12 = &i2c_max77693_fuel;
};
- memory {
+ mmemory@...00000 {
reg = <0x40000000 0x40000000>;
};
@@ -146,13 +146,13 @@
reg = <0x66>;
regulators {
- esafeout1_reg: ESAFEOUT1@1 {
+ esafeout1_reg: ESAFEOUT1 {
regulator-name = "ESAFEOUT1";
};
- esafeout2_reg: ESAFEOUT2@2 {
+ esafeout2_reg: ESAFEOUT2 {
regulator-name = "ESAFEOUT2";
};
- charger_reg: CHARGER@0 {
+ charger_reg: CHARGER {
regulator-name = "CHARGER";
regulator-min-microamp = <60000>;
regulator-max-microamp = <2580000>;
@@ -251,7 +251,7 @@
"SPK", "SPKOUTRP";
};
- thermistor-ap@0 {
+ thermistor-ap {
compatible = "ntc,ncp15wb473";
pullup-uv = <1800000>; /* VCC_1.8V_AP */
pullup-ohm = <100000>; /* 100K */
@@ -259,7 +259,7 @@
io-channels = <&adc 1>; /* AP temperature */
};
- thermistor-battery@1 {
+ thermistor-battery {
compatible = "ntc,ncp15wb473";
pullup-uv = <1800000>; /* VCC_1.8V_AP */
pullup-ohm = <100000>; /* 100K */
@@ -1276,7 +1276,7 @@
cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
status = "okay";
- s5c73m3_spi: s5c73m3 {
+ s5c73m3_spi: s5c73m3@0 {
compatible = "samsung,s5c73m3";
spi-max-frequency = <50000000>;
reg = <0>;
--
2.5.0
Powered by blists - more mailing lists