linux-kernel - Applied "regulator: twl: Provide of_map_mode for twl4030" to the regulator tree

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Date:	Tue, 05 Apr 2016 11:40:36 -0700
From:	Mark Brown <broonie@...nel.org>
To:	Ivaylo Dimitrov <ivo.g.dimitrov.75@...il.com>,
	Mark Brown <broonie@...nel.org>
Cc:	linux-kernel@...r.kernel.org
Subject: Applied "regulator: twl: Provide of_map_mode for twl4030" to the regulator tree

The patch

   regulator: twl: Provide of_map_mode for twl4030

has been applied to the regulator tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From a221f95ef4257a48c4f8cba8e804431ab66a359d Mon Sep 17 00:00:00 2001
From: Ivaylo Dimitrov <ivo.g.dimitrov.75@...il.com>
Date: Tue, 5 Apr 2016 08:59:34 +0300
Subject: [PATCH] regulator: twl: Provide of_map_mode for twl4030

of_map_mode is needed so to be possible to set initial regulators mode from
the board DTS. Otherwise, for DT boot, regulators are left in their default
state after reset/reboot. Document device specific modes as well.

Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@...il.com>
Signed-off-by: Mark Brown <broonie@...nel.org>
---
 .../bindings/regulator/twl-regulator.txt           |  6 ++++++
 drivers/regulator/twl-regulator.c                  | 22 +++++++++++++++++++---
 2 files changed, 25 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/twl-regulator.txt b/Documentation/devicetree/bindings/regulator/twl-regulator.txt
index 75b0c1669504..74a91c4f8530 100644
--- a/Documentation/devicetree/bindings/regulator/twl-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/twl-regulator.txt
@@ -57,6 +57,12 @@ For twl4030 regulators/LDOs
 
 Optional properties:
 - Any optional property defined in bindings/regulator/regulator.txt
+For twl4030 regulators/LDOs:
+ - regulator-initial-mode:
+  - 0x08 - Sleep mode, the nominal output voltage is maintained with low power
+           consumption with low load current capability.
+  - 0x0e - Active mode, the regulator can deliver its nominal output voltage
+           with full-load current capability.
 
 Example:
 
diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
index 7355616194ab..11c6a5c98c46 100644
--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -387,6 +387,18 @@ static int twl4030reg_set_mode(struct regulator_dev *rdev, unsigned mode)
 	return twl4030_send_pb_msg(message);
 }
 
+static inline unsigned int twl4030reg_map_mode(unsigned int mode)
+{
+	switch (mode) {
+	case RES_STATE_ACTIVE:
+		return REGULATOR_MODE_NORMAL;
+	case RES_STATE_SLEEP:
+		return REGULATOR_MODE_STANDBY;
+	default:
+		return -EINVAL;
+	}
+}
+
 static int twl6030reg_set_mode(struct regulator_dev *rdev, unsigned mode)
 {
 	struct twlreg_info	*info = rdev_get_drvdata(rdev);
@@ -889,10 +901,11 @@ static struct regulator_ops twlsmps_ops = {
 #define TWL4030_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \
 			remap_conf) \
 		TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \
-			remap_conf, TWL4030, twl4030fixed_ops)
+			remap_conf, TWL4030, twl4030fixed_ops, \
+			twl4030reg_map_mode)
 #define TWL6030_FIXED_LDO(label, offset, mVolts, turnon_delay) \
 		TWL_FIXED_LDO(label, offset, mVolts, 0x0, turnon_delay, \
-			0x0, TWL6030, twl6030fixed_ops)
+			0x0, TWL6030, twl6030fixed_ops, 0x0)
 
 #define TWL4030_ADJUSTABLE_LDO(label, offset, num, turnon_delay, remap_conf) \
 static const struct twlreg_info TWL4030_INFO_##label = { \
@@ -909,6 +922,7 @@ static const struct twlreg_info TWL4030_INFO_##label = { \
 		.type = REGULATOR_VOLTAGE, \
 		.owner = THIS_MODULE, \
 		.enable_time = turnon_delay, \
+		.of_map_mode = twl4030reg_map_mode, \
 		}, \
 	}
 
@@ -924,6 +938,7 @@ static const struct twlreg_info TWL4030_INFO_##label = { \
 		.type = REGULATOR_VOLTAGE, \
 		.owner = THIS_MODULE, \
 		.enable_time = turnon_delay, \
+		.of_map_mode = twl4030reg_map_mode, \
 		}, \
 	}
 
@@ -969,7 +984,7 @@ static const struct twlreg_info TWL6032_INFO_##label = { \
 	}
 
 #define TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, remap_conf, \
-		family, operations) \
+		family, operations, map_mode) \
 static const struct twlreg_info TWLFIXED_INFO_##label = { \
 	.base = offset, \
 	.id = num, \
@@ -984,6 +999,7 @@ static const struct twlreg_info TWLFIXED_INFO_##label = { \
 		.owner = THIS_MODULE, \
 		.min_uV = mVolts * 1000, \
 		.enable_time = turnon_delay, \
+		.of_map_mode = map_mode, \
 		}, \
 	}
 
-- 
2.8.0.rc3