linux-kernel - Re: [PATCH v6 12/12] usb: host: xhci-plat: Add otg device to platform data

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <5704ACF2.6020201@ti.com>
Date:	Wed, 6 Apr 2016 09:30:10 +0300
From:	Roger Quadros <rogerq@...com>
To:	Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
	"stern@...land.harvard.edu" <stern@...land.harvard.edu>,
	"balbi@...nel.org" <balbi@...nel.org>,
	"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
	"peter.chen@...escale.com" <peter.chen@...escale.com>
CC:	"dan.j.williams@...el.com" <dan.j.williams@...el.com>,
	"jun.li@...escale.com" <jun.li@...escale.com>,
	"mathias.nyman@...ux.intel.com" <mathias.nyman@...ux.intel.com>,
	"tony@...mide.com" <tony@...mide.com>,
	"Joao.Pinto@...opsys.com" <Joao.Pinto@...opsys.com>,
	"abrestic@...omium.org" <abrestic@...omium.org>,
	"r.baldyga@...sung.com" <r.baldyga@...sung.com>,
	"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"linux-omap@...r.kernel.org" <linux-omap@...r.kernel.org>
Subject: Re: [PATCH v6 12/12] usb: host: xhci-plat: Add otg device to platform
 data

Hi,

On 06/04/16 06:23, Yoshihiro Shimoda wrote:
> Hi,
> 
>> Sent: Tuesday, April 05, 2016 11:05 PM
>>
>> Host controllers that are part of an OTG/dual-role instance
>> need to somehow pass the OTG controller device information
>> to the HCD core.
>>
>> We use platform data to pass the OTG controller device.
>>
>> Signed-off-by: Roger Quadros <rogerq@...com>
>> ---
>>  drivers/usb/host/xhci-plat.c     | 35 ++++++++++++++++++++++++++++-------
>>  include/linux/usb/xhci_pdriver.h |  3 +++
>>  2 files changed, 31 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
>> index 5c15e9b..3d0f597 100644
>> --- a/drivers/usb/host/xhci-plat.c
>> +++ b/drivers/usb/host/xhci-plat.c
>> @@ -230,11 +230,20 @@ static int xhci_plat_probe(struct platform_device *pdev)
>>  			goto put_usb3_hcd;
>>  	}
>>
>> -	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
>> +	if (pdata->otg_dev)
> 
> I think that this should be changed like below:
> 	if (pdata && pdata->otg_dev)

Indeed, I'll fix this and the remaining occurrences. Thanks.

cheers,
-roger

> 
> Otherwise, panic happened on my environment (arm64 / r8a7795 board) because the pdata was NULL.
> 
>> +		ret = usb_otg_add_hcd(hcd, irq, IRQF_SHARED, pdata->otg_dev);
>> +	else
>> +		ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
>> +
>>  	if (ret)
>>  		goto disable_usb_phy;
>>
>> -	ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
>> +	if (pdata->otg_dev)
> 
> Ditto.
> 
>> +		ret = usb_otg_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED,
>> +				      pdata->otg_dev);
>> +	else
>> +		ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
>> +
>>  	if (ret)
>>  		goto dealloc_usb2_hcd;
>>
>> @@ -242,7 +251,10 @@ static int xhci_plat_probe(struct platform_device *pdev)
>>
>>
>>  dealloc_usb2_hcd:
>> -	usb_remove_hcd(hcd);
>> +	if (pdata->otg_dev)
> 
> Ditto.
> 
>> +		usb_otg_remove_hcd(hcd);
>> +	else
>> +		usb_remove_hcd(hcd);
>>
>>  disable_usb_phy:
>>  	usb_phy_shutdown(hcd->usb_phy);
>> @@ -260,16 +272,25 @@ put_hcd:
>>  	return ret;
>>  }
>>
>> -static int xhci_plat_remove(struct platform_device *dev)
>> +static int xhci_plat_remove(struct platform_device *pdev)
>>  {
>> -	struct usb_hcd	*hcd = platform_get_drvdata(dev);
>> +	struct usb_hcd	*hcd = platform_get_drvdata(pdev);
>>  	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
>>  	struct clk *clk = xhci->clk;
>> +	struct usb_xhci_pdata *pdata = dev_get_platdata(&pdev->dev);
>> +
>> +	if (pdata->otg_dev)
> 
> Ditto.
> 
>> +		usb_otg_remove_hcd(xhci->shared_hcd);
>> +	else
>> +		usb_remove_hcd(xhci->shared_hcd);
>>
>> -	usb_remove_hcd(xhci->shared_hcd);
>>  	usb_phy_shutdown(hcd->usb_phy);
>>
>> -	usb_remove_hcd(hcd);
>> +	if (pdata->otg_dev)
> 
> Ditto.
> 
> Best regards,
> Yoshihiro Shimoda
> 
>> +		usb_otg_remove_hcd(hcd);
>> +	else
>> +		usb_remove_hcd(hcd);
>> +
>>  	usb_put_hcd(xhci->shared_hcd);
>>
>>  	if (!IS_ERR(clk))
>> diff --git a/include/linux/usb/xhci_pdriver.h b/include/linux/usb/xhci_pdriver.h
>> index 376654b..5c68b83 100644
>> --- a/include/linux/usb/xhci_pdriver.h
>> +++ b/include/linux/usb/xhci_pdriver.h
>> @@ -18,10 +18,13 @@
>>   *
>>   * @usb3_lpm_capable:	determines if this xhci platform supports USB3
>>   *			LPM capability
>> + * @otg_dev:		OTG controller device. Only requied if part of
>> + *			OTG/dual-role.
>>   *
>>   */
>>  struct usb_xhci_pdata {
>>  	unsigned	usb3_lpm_capable:1;
>> +	struct device	*otg_dev;
>>  };
>>
>>  #endif /* __USB_CORE_XHCI_PDRIVER_H */
>> --
>> 2.5.0
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
>> the body of a message to majordomo@...r.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html