linux-kernel - Re: [PATCH v3 06/13] USB: ch341: add support for parity, frame length, stop bits

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <kYqAUVx6EpAXHn9qRPhzzfPfbYsFwFAtu66rPMMU2103@mailpile>
Date:	Mon, 11 Apr 2016 17:25:04 -0000
From:	Karl Palsson <karlp@...ak.net.au>
To:	"Grigori Goronzy" <greg@...wn.ath.cx>
Cc:	"Greg Kroah-Hartman" <gregkh@...uxfoundation.org>,
	"Johan Hovold" <johan@...nel.org>,
	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
	Linux USB Mailing List <linux-usb@...r.kernel.org>
Subject: Re: [PATCH v3 06/13] USB: ch341: add support for parity, frame length,
 stop bits

Sorry if you get this twice, I was having some client problems,
but wanted to make sure you got this one...


Grigori Goronzy <greg@...wn.ath.cx> wrote:
> With the new reinitialization method, configuring parity,
> different frame lengths and different stop bit settings work as
> expected on both CH340G and CH341A. This has been extensively
> tested with a logic analyzer.
> 
> v2: only set mark/space when parity is enabled,
> simplifications, patch termios HW flags.
> 
> Tested-by: Ryan Barber <rfb@...scraper.nu>
> Signed-off-by: Grigori Goronzy <greg@...wn.ath.cx>
> ---
>  drivers/usb/serial/ch341.c | 40 ++++++++++++++++++++++++++++++----------
>  1 file changed, 30 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/usb/serial/ch341.c
> b/drivers/usb/serial/ch341.c index 6181616..99b4621 100644
> --- a/drivers/usb/serial/ch341.c
> +++ b/drivers/usb/serial/ch341.c
> @@ -341,7 +341,6 @@ static void ch341_set_termios(struct tty_struct *tty,
>  		struct usb_serial_port *port, struct ktermios *old_termios)
>  {
>  	struct ch341_private *priv = usb_get_serial_port_data(port);
> -	unsigned baud_rate;
>  	unsigned long flags;
>  	unsigned char ctrl;
>  	int r;
> @@ -350,13 +349,39 @@ static void ch341_set_termios(struct tty_struct *tty,
>  	if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
>  		return;
>  
> -	baud_rate = tty_get_baud_rate(tty);
> +	priv->baud_rate = tty_get_baud_rate(tty);
>  
> -	priv->baud_rate = baud_rate;
> +	ctrl = CH341_LCR_ENABLE_RX | CH341_LCR_ENABLE_TX;
>  
> -	ctrl = CH341_LCR_ENABLE_RX | CH341_LCR_ENABLE_TX | CH341_LCR_CS8;
> +	switch (C_CSIZE(tty)) {
> +	case CS5:
> +		ctrl |= CH341_LCR_CS5;
> +		break;
> +	case CS6:
> +		ctrl |= CH341_LCR_CS6;
> +		break;
> +	case CS7:
> +		ctrl |= CH341_LCR_CS7;
> +		break;
> +	default:
> +		tty->termios.c_cflag |= CS8;
> +	case CS8:
> +		ctrl |= CH341_LCR_CS8;
> +		break;
> +	}
> +
> +	if (C_PARENB(tty)) {
> +		ctrl |= CH341_LCR_ENABLE_PAR;
> +		if (C_PARODD(tty))
> +			ctrl |= CH341_LCR_PAR_EVEN;

Are you sure this does the right thing now? this is, as best as I
can tell, the inverse of what you had earlier, and doesn't read
right, if this is working, then I suggest renaming _LCR_PAR_EVEN
to LCR_PAR_ODD?

Cheers,
Karl P


> +		if (C_CMSPAR(tty))
> +			ctrl |= CH341_LCR_MARK_SPACE;
> +	}
> +
> +	if (C_CSTOPB(tty))
> +		ctrl |= CH341_LCR_STOP_BITS_2;
>  
> -	if (baud_rate) {
> +	if (priv->baud_rate) {
>  		spin_lock_irqsave(&priv->lock, flags);
>  		priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
>  		spin_unlock_irqrestore(&priv->lock, flags);
> @@ -373,11 +398,6 @@ static void ch341_set_termios(struct tty_struct *tty,
>  
>  	ch341_set_handshake(port->serial->dev, priv->line_control);
>  
> -	/* Unimplemented:
> -	 * (cflag & CSIZE) : data bits [5, 8]
> -	 * (cflag & PARENB) : parity {NONE, EVEN, ODD}
> -	 * (cflag & CSTOPB) : stop bits [1, 2]
> -	 */
>  }
>  
>  static void ch341_break_ctl(struct tty_struct *tty, int break_state)
> -- 
> 1.9.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe
> linux-usb" in the body of a message to
> majordomo@...r.kernel.org More majordomo info at
> http://vger.kernel.org/majordomo-info.html

Download attachment "signature.asc" of type "application/pgp-signature" (820 bytes)