| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAFGCpxxV86NLvacd+UjxBkT=R8DktAhUmWvQsAD0ppzy=tC4oA@mail.gmail.com>
Date: Wed, 13 Apr 2016 08:14:43 +0800
From: Guodong Xu <guodong.xu@...aro.org>
To: Rob Herring <robh+dt@...nel.org>
Cc: Wei Xu <xuwei5@...ilicon.com>, Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Haojian Zhuang <haojian.zhuang@...aro.org>,
Linus Walleij <linus.walleij@...aro.org>,
Tony Lindgren <tony@...mide.com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Chen Feng <puck.chen@...ilicon.com>, Fei Wang <w.f@...wei.com>,
Xinwei Kong <kong.kongxinwei@...ilicon.com>
Subject: Re: [PATCH v4 14/16] arm64: dts: hikey: Add hi655x pmic dts node
On 13 April 2016 at 08:11, Rob Herring <robh+dt@...nel.org> wrote:
> On Tue, Apr 12, 2016 at 6:55 PM, Guodong Xu <guodong.xu@...aro.org> wrote:
>> From: Chen Feng <puck.chen@...ilicon.com>
>>
>> Add the mfd hi655x dts node and regulator support on hi6220 platform.
>>
>> Signed-off-by: Chen Feng <puck.chen@...ilicon.com>
>> Signed-off-by: Fei Wang <w.f@...wei.com>
>> Signed-off-by: Xinwei Kong <kong.kongxinwei@...ilicon.com>
>> Signed-off-by: Guodong Xu <guodong.xu@...aro.org>
>> Reviewed-by: Haojian Zhuang <haojian.zhuang@...aro.org>
>> Reviewed-by: Rob Herring <robh@...nel.org>
>
> I did not provide a Reviewed-by. You cannot add people's Reviewed-by
> just because they provided a review. It is only when the review is
> finished that the reviewer will give it.
Got it.
:)
>
> That being said, it looks fine now and you can add it.
Thank you.
-Guodong
>
>> Acked-by: Lee Jones <lee.jones@...aro.org>
>> ---
>> arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 87 +++++++++++++++++++++++++-
>> 1 file changed, 86 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
>> index b7c41f8..cc1148d 100644
>> --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
>> +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
>> @@ -6,9 +6,9 @@
>> */
>>
>> /dts-v1/;
>> -
>> #include "hi6220.dtsi"
>> #include "hikey-pinctrl.dtsi"
>> +#include <dt-bindings/gpio/gpio.h>
>>
>> / {
>> model = "HiKey Development Board";
>> @@ -107,6 +107,91 @@
>> default-state = "off";
>> };
>> };
>> +
>> + pmic: pmic@...00000 {
>> + compatible = "hisilicon,hi655x-pmic";
>> + reg = <0x0 0xf8000000 0x0 0x1000>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
>> +
>> + regulators {
>> + ldo2: LDO2 {
>> + regulator-name = "LDO2_2V8";
>> + regulator-min-microvolt = <2500000>;
>> + regulator-max-microvolt = <3200000>;
>> + regulator-enable-ramp-delay = <120>;
>> + };
>> +
>> + ldo7: LDO7 {
>> + regulator-name = "LDO7_SDIO";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-enable-ramp-delay = <120>;
>> + };
>> +
>> + ldo10: LDO10 {
>> + regulator-name = "LDO10_2V85";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <3000000>;
>> + regulator-enable-ramp-delay = <360>;
>> + };
>> +
>> + ldo13: LDO13 {
>> + regulator-name = "LDO13_1V8";
>> + regulator-min-microvolt = <1600000>;
>> + regulator-max-microvolt = <1950000>;
>> + regulator-enable-ramp-delay = <120>;
>> + };
>> +
>> + ldo14: LDO14 {
>> + regulator-name = "LDO14_2V8";
>> + regulator-min-microvolt = <2500000>;
>> + regulator-max-microvolt = <3200000>;
>> + regulator-enable-ramp-delay = <120>;
>> + };
>> +
>> + ldo15: LDO15 {
>> + regulator-name = "LDO15_1V8";
>> + regulator-min-microvolt = <1600000>;
>> + regulator-max-microvolt = <1950000>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + regulator-enable-ramp-delay = <120>;
>> + };
>> +
>> + ldo17: LDO17 {
>> + regulator-name = "LDO17_2V5";
>> + regulator-min-microvolt = <2500000>;
>> + regulator-max-microvolt = <3200000>;
>> + regulator-enable-ramp-delay = <120>;
>> + };
>> +
>> + ldo19: LDO19 {
>> + regulator-name = "LDO19_3V0";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <3000000>;
>> + regulator-enable-ramp-delay = <360>;
>> + };
>> +
>> + ldo21: LDO21 {
>> + regulator-name = "LDO21_1V8";
>> + regulator-min-microvolt = <1650000>;
>> + regulator-max-microvolt = <2000000>;
>> + regulator-always-on;
>> + regulator-enable-ramp-delay = <120>;
>> + };
>> +
>> + ldo22: LDO22 {
>> + regulator-name = "LDO22_1V2";
>> + regulator-min-microvolt = <900000>;
>> + regulator-max-microvolt = <1200000>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + regulator-enable-ramp-delay = <120>;
>> + };
>> + };
>> + };
>> };
>>
>> &uart2 {
>> --
>> 1.9.1
>>
Powered by blists - more mailing lists