| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAL_Jsq+4kHUBvSLheV-hfmPFic_D+3Xz7oXOKnUSqnWOt71Peg@mail.gmail.com>
Date: Tue, 12 Apr 2016 19:11:27 -0500
From: Rob Herring <robh+dt@...nel.org>
To: Guodong Xu <guodong.xu@...aro.org>
Cc: Wei Xu <xuwei5@...ilicon.com>, Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Haojian Zhuang <haojian.zhuang@...aro.org>,
Linus Walleij <linus.walleij@...aro.org>,
Tony Lindgren <tony@...mide.com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Chen Feng <puck.chen@...ilicon.com>, Fei Wang <w.f@...wei.com>,
Xinwei Kong <kong.kongxinwei@...ilicon.com>
Subject: Re: [PATCH v4 14/16] arm64: dts: hikey: Add hi655x pmic dts node
On Tue, Apr 12, 2016 at 6:55 PM, Guodong Xu <guodong.xu@...aro.org> wrote:
> From: Chen Feng <puck.chen@...ilicon.com>
>
> Add the mfd hi655x dts node and regulator support on hi6220 platform.
>
> Signed-off-by: Chen Feng <puck.chen@...ilicon.com>
> Signed-off-by: Fei Wang <w.f@...wei.com>
> Signed-off-by: Xinwei Kong <kong.kongxinwei@...ilicon.com>
> Signed-off-by: Guodong Xu <guodong.xu@...aro.org>
> Reviewed-by: Haojian Zhuang <haojian.zhuang@...aro.org>
> Reviewed-by: Rob Herring <robh@...nel.org>
I did not provide a Reviewed-by. You cannot add people's Reviewed-by
just because they provided a review. It is only when the review is
finished that the reviewer will give it.
That being said, it looks fine now and you can add it.
> Acked-by: Lee Jones <lee.jones@...aro.org>
> ---
> arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 87 +++++++++++++++++++++++++-
> 1 file changed, 86 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> index b7c41f8..cc1148d 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> @@ -6,9 +6,9 @@
> */
>
> /dts-v1/;
> -
> #include "hi6220.dtsi"
> #include "hikey-pinctrl.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
>
> / {
> model = "HiKey Development Board";
> @@ -107,6 +107,91 @@
> default-state = "off";
> };
> };
> +
> + pmic: pmic@...00000 {
> + compatible = "hisilicon,hi655x-pmic";
> + reg = <0x0 0xf8000000 0x0 0x1000>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
> +
> + regulators {
> + ldo2: LDO2 {
> + regulator-name = "LDO2_2V8";
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <3200000>;
> + regulator-enable-ramp-delay = <120>;
> + };
> +
> + ldo7: LDO7 {
> + regulator-name = "LDO7_SDIO";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-enable-ramp-delay = <120>;
> + };
> +
> + ldo10: LDO10 {
> + regulator-name = "LDO10_2V85";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-enable-ramp-delay = <360>;
> + };
> +
> + ldo13: LDO13 {
> + regulator-name = "LDO13_1V8";
> + regulator-min-microvolt = <1600000>;
> + regulator-max-microvolt = <1950000>;
> + regulator-enable-ramp-delay = <120>;
> + };
> +
> + ldo14: LDO14 {
> + regulator-name = "LDO14_2V8";
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <3200000>;
> + regulator-enable-ramp-delay = <120>;
> + };
> +
> + ldo15: LDO15 {
> + regulator-name = "LDO15_1V8";
> + regulator-min-microvolt = <1600000>;
> + regulator-max-microvolt = <1950000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-enable-ramp-delay = <120>;
> + };
> +
> + ldo17: LDO17 {
> + regulator-name = "LDO17_2V5";
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <3200000>;
> + regulator-enable-ramp-delay = <120>;
> + };
> +
> + ldo19: LDO19 {
> + regulator-name = "LDO19_3V0";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-enable-ramp-delay = <360>;
> + };
> +
> + ldo21: LDO21 {
> + regulator-name = "LDO21_1V8";
> + regulator-min-microvolt = <1650000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-always-on;
> + regulator-enable-ramp-delay = <120>;
> + };
> +
> + ldo22: LDO22 {
> + regulator-name = "LDO22_1V2";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-enable-ramp-delay = <120>;
> + };
> + };
> + };
> };
>
> &uart2 {
> --
> 1.9.1
>
Powered by blists - more mailing lists