[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CALAqxLU79bGTGUZbB+yu=k4Pf2d8KaEyNkaWJ8SRewXu+7SQ4Q@mail.gmail.com>
Date: Wed, 13 Apr 2016 10:34:48 -0700
From: John Stultz <john.stultz@...aro.org>
To: Sudeep Holla <sudeep.holla@....com>
Cc: lkml <linux-kernel@...r.kernel.org>,
Rob Herring <robh+dt@...nel.org>,
Arnd Bergmann <arnd.bergmann@...aro.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Andy Gross <agross@...eaurora.org>,
Vinay Simha BN <simhavcs@...il.com>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Stephen Boyd <stephen.boyd@...aro.org>,
"linux-arm-msm@...r.kernel.org" <linux-arm-msm@...r.kernel.org>,
devicetree@...r.kernel.org
Subject: Re: [PATCH] device-tree: nexus7-flo: Remove power gpio key entry and
use pmic8xxx-pwrkey
On Wed, Apr 13, 2016 at 10:24 AM, Sudeep Holla <sudeep.holla@....com> wrote:
>
>
> On 13/04/16 18:16, John Stultz wrote:
>>
>> Since the pmic8xxx-pwrkey driver is already supported in the
>> qcom-apq8064.dtsi, and the pmic8xxx-pwrkey supports logic to
>> configure proper device shutdown when ps_hold goes low, it is
>> better to use that driver then a generic gpio button.
>>
>> Thus this patch remove the gpio power key entry here, so we
>> don't get double input events from having two drivers enabled.
>>
>> The one gotcha with the pmic8xxx-pwrkey is it has a fairly
>> long debounce delay, which we shorten here to make the button
>> behave as expected.
>>
>> Cc: Rob Herring <robh+dt@...nel.org>
>> Cc: Arnd Bergmann <arnd.bergmann@...aro.org>
>> Cc: Pawel Moll <pawel.moll@....com>
>> Cc: Mark Rutland <mark.rutland@....com>
>> Cc: Ian Campbell <ijc+devicetree@...lion.org.uk>
>> Cc: Kumar Gala <galak@...eaurora.org>
>> Cc: Andy Gross <agross@...eaurora.org>
>> Cc: Vinay Simha BN <simhavcs@...il.com>
>> Cc: Bjorn Andersson <bjorn.andersson@...aro.org>
>> Cc: Stephen Boyd <stephen.boyd@...aro.org>
>> Cc: linux-arm-msm@...r.kernel.org
>> Cc: devicetree@...r.kernel.org
>> Signed-off-by: John Stultz <john.stultz@...aro.org>
>> ---
>> arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 15 +++++++++------
>> 1 file changed, 9 insertions(+), 6 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
>> b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
>> index c535b3f..7ac1c65 100644
>> --- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
>> +++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
>> @@ -29,12 +29,6 @@
>>
>> gpio-keys {
>> compatible = "gpio-keys";
>> - power {
>> - label = "Power";
>> - gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
>> - linux,code = <KEY_POWER>;
>> - gpio-key,wakeup;
>
>
> You are dropping wakeup with this change. Is that intentional ?
>
> If not, while you are at this, replace it with "wakeup-source"
> which is standard binding.
Thanks for catching this. Its not intentional, but I don't have
suspend/resume working yet on the n7 so I've never really tested it.
I'll add wakeup-source to the pwrkey entry for the next version.
thanks
-john
Powered by blists - more mailing lists