| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1461059020-25373-3-git-send-email-ldewangan@nvidia.com>
Date: Tue, 19 Apr 2016 15:13:40 +0530
From: Laxman Dewangan <ldewangan@...dia.com>
To: <linus.walleij@...aro.org>, <gnurou@...il.com>,
<swarren@...dotorg.org>, <thierry.reding@...il.com>
CC: <linux-gpio@...r.kernel.org>, <linux-tegra@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
Laxman Dewangan <ldewangan@...dia.com>
Subject: [PATCH V2 3/3] gpio: tegra: Add support for gpio debounce
NVIDIA's Tegra210 support the HW debounce in the GPIO
controller for all its GPIO pins.
Add support for setting debounce timing by implementing the
set_debounce callback of gpiochip.
Signed-off-by: Laxman Dewangan <ldewangan@...dia.com>
---
Changes from V1:
- Write debounce count before enable.
- Make sure the debounce count do not have any boot residuals.
---
drivers/gpio/gpio-tegra.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index de022a9..8b1a2d3 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -46,6 +46,7 @@
#define GPIO_INT_ENB(x) (GPIO_REG(x) + 0x50)
#define GPIO_INT_LVL(x) (GPIO_REG(x) + 0x60)
#define GPIO_INT_CLR(x) (GPIO_REG(x) + 0x70)
+#define GPIO_DBC_CNT(x) (GPIO_REG(x) + 0xF0)
#define GPIO_MSK_CNF(x) (GPIO_REG(x) + tegra_gpio_upper_offset + 0x00)
#define GPIO_MSK_OE(x) (GPIO_REG(x) + tegra_gpio_upper_offset + 0x10)
@@ -53,6 +54,7 @@
#define GPIO_MSK_INT_STA(x) (GPIO_REG(x) + tegra_gpio_upper_offset + 0x40)
#define GPIO_MSK_INT_ENB(x) (GPIO_REG(x) + tegra_gpio_upper_offset + 0x50)
#define GPIO_MSK_INT_LVL(x) (GPIO_REG(x) + tegra_gpio_upper_offset + 0x60)
+#define GPIO_MSK_DBC_EN(x) (GPIO_REG(x) + tegra_gpio_upper_offset + 0x30)
#define GPIO_INT_LVL_MASK 0x010101
#define GPIO_INT_LVL_EDGE_RISING 0x000101
@@ -72,12 +74,15 @@ struct tegra_gpio_bank {
u32 int_enb[4];
u32 int_lvl[4];
u32 wake_enb[4];
+ u32 dbc_enb[4];
#endif
+ u32 dbc_cnt[4];
};
struct tegra_gpio_soc_config {
u32 bank_stride;
u32 upper_offset;
+ bool debounce_supported;
};
static struct irq_domain *irq_domain;
@@ -164,6 +169,33 @@ static int tegra_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
return 0;
}
+static int tegra_gpio_set_debounce(struct gpio_chip *chip, unsigned int offset,
+ unsigned int debounce)
+{
+ unsigned int debounce_ms = DIV_ROUND_UP(debounce, 1000);
+ int port = GPIO_PORT(offset);
+ int bank = GPIO_BANK(offset);
+
+ if (!debounce_ms) {
+ tegra_gpio_mask_write(GPIO_MSK_DBC_EN(offset), offset, 0);
+ return 0;
+ }
+
+ debounce_ms = min(debounce_ms, 255U);
+
+ /* There is only one debounce count register per port and hence
+ * set the maximum of current and requested debounce time.
+ */
+ if (tegra_gpio_banks[bank].dbc_cnt[port] < debounce_ms) {
+ tegra_gpio_writel(debounce_ms, GPIO_DBC_CNT(offset));
+ tegra_gpio_banks[bank].dbc_cnt[port] = debounce_ms;
+ }
+
+ tegra_gpio_mask_write(GPIO_MSK_DBC_EN(offset), offset, 1);
+
+ return 0;
+}
+
static int tegra_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
{
return irq_find_mapping(irq_domain, offset);
@@ -177,6 +209,7 @@ static struct gpio_chip tegra_gpio_chip = {
.get = tegra_gpio_get,
.direction_output = tegra_gpio_direction_output,
.set = tegra_gpio_set,
+ .set_debounce = tegra_gpio_set_debounce,
.to_irq = tegra_gpio_to_irq,
.base = 0,
};
@@ -327,6 +360,9 @@ static int tegra_gpio_resume(struct device *dev)
tegra_gpio_writel(bank->oe[p], GPIO_OE(gpio));
tegra_gpio_writel(bank->int_lvl[p], GPIO_INT_LVL(gpio));
tegra_gpio_writel(bank->int_enb[p], GPIO_INT_ENB(gpio));
+ tegra_gpio_writel(bank->dbc_cnt[p], GPIO_DBC_CNT(gpio));
+ tegra_gpio_writel(bank->dbc_enb[p],
+ GPIO_MSK_DBC_EN(gpio));
}
}
@@ -351,6 +387,10 @@ static int tegra_gpio_suspend(struct device *dev)
bank->oe[p] = tegra_gpio_readl(GPIO_OE(gpio));
bank->int_enb[p] = tegra_gpio_readl(GPIO_INT_ENB(gpio));
bank->int_lvl[p] = tegra_gpio_readl(GPIO_INT_LVL(gpio));
+ bank->dbc_enb[p] = tegra_gpio_readl(
+ GPIO_MSK_DBC_EN(gpio));
+ bank->dbc_enb[p] = (bank->dbc_enb[p] << 8) ||
+ bank->dbc_enb[p];
/* Enable gpio irq for wake up source */
tegra_gpio_writel(bank->wake_enb[p],
@@ -473,6 +513,8 @@ static int tegra_gpio_probe(struct platform_device *pdev)
tegra_gpio_bank_stride = config->bank_stride;
tegra_gpio_upper_offset = config->upper_offset;
+ if (!config->debounce_supported)
+ tegra_gpio_chip.set_debounce = NULL;
for (;;) {
res = platform_get_resource(pdev, IORESOURCE_IRQ, tegra_gpio_bank_count);
@@ -570,7 +612,14 @@ static struct tegra_gpio_soc_config tegra30_gpio_config = {
.upper_offset = 0x80,
};
+static struct tegra_gpio_soc_config tegra210_gpio_config = {
+ .bank_stride = 0x100,
+ .upper_offset = 0x80,
+ .debounce_supported = true,
+};
+
static const struct of_device_id tegra_gpio_of_match[] = {
+ { .compatible = "nvidia,tegra210-gpio", .data = &tegra210_gpio_config },
{ .compatible = "nvidia,tegra30-gpio", .data = &tegra30_gpio_config },
{ .compatible = "nvidia,tegra20-gpio", .data = &tegra20_gpio_config },
{ },
--
2.1.4
Powered by blists - more mailing lists