linux-kernel - Re: [Kernel] [PATCH v2 4/5] ARM: dts: omap5: describe control for ckobuffer

Open Source and information security mailing list archives

Message-ID: <3973330a-8a73-89fa-8e09-383407d0eaf9@ti.com>
Date:	Mon, 9 May 2016 16:52:44 +0300
From:	Peter Ujfalusi <peter.ujfalusi@...com>
To:	Tero Kristo <t-kristo@...com>,
	"H. Nikolaus Schaller" <hns@...delico.com>
CC:	Mark Rutland <mark.rutland@....com>, <devicetree@...r.kernel.org>,
	Discussions about the Letux Kernel 
	<letux-kernel@...nphoenux.org>,
	Russell King <linux@....linux.org.uk>,
	Pawel Moll <pawel.moll@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Tony Lindgren <tony@...mide.com>, <kernel@...a-handheld.com>,
	LKML <linux-kernel@...r.kernel.org>,
	Rob Herring <robh+dt@...nel.org>,
	Laxman Dewangan <ldewangan@...dia.com>,
	Benoît Cousson <bcousson@...libre.com>,
	Kumar Gala <galak@...eaurora.org>,
	Marek Belisko <marek@...delico.com>,
	linux-omap <linux-omap@...r.kernel.org>
Subject: Re: [Kernel] [PATCH v2 4/5] ARM: dts: omap5: describe control for
 ckobuffer

On 05/09/16 15:46, Peter Ujfalusi wrote:
> On 05/09/16 15:32, Peter Ujfalusi wrote:
>> On 05/09/16 15:10, Peter Ujfalusi wrote:
>>
>>>>> finally I found some time to apply your patches. Sorry for the long time.
>>>>>
>>>>> Unfortunately, it does not work. Neither on omap5evm nor on our omap5 hardware.
>>>>> I get no sound on the twl6040 - just white noise (which can be controlled in
>>>>> level through
>>>>> amixer so it is created on the digital input side of the twl6040).
>>>>>
>>>>> So I think your patch is missing a detail compared to my simple solution.
>>>>
>>>> Did you implement anything on the audio driver side? The audio driver must
>>>> enable the clock implemented by this patch.
>>>
>>> I did, can test it in 10 minutes or so...
>>
>> might work, but linux-next is not booting on omap5-uevm :o I don't know why...
> 
> Applying Tero's alone makes the board not to boot, so something there... I can
> not see anything even with low-level debugging enabled :( I can not debug it
> further today, will look at this tomorrow.

The crash is in arch/arm/mach-omap2/control.c:omap_control_init()

the syscon_node_to_regmap() returns with error for the new
omap5_scm_wkup_pad_conf node. The other syscon was OK, but becasue of the
return PTR_ERR(syscon) the board will not boot...

Tero: any idea?

>> In any case I have attached the 3 patches I have for this, including Tero's
>> ported to linux-next.
>>
>> Patch 3 might need to be done per board probably, but this should be good for
>> testing.
>>
>>
>>
>> _______________________________________________
>> Kernel mailing list
>> Kernel@...a-handheld.com
>> http://pyra-handheld.com/cgi-bin/mailman/listinfo/kernel
>>
> 
> 

-- 
Péter

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives