| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 11 May 2016 18:27:24 +0100
From: Mark Brown <broonie@...nel.org>
To: Keerthy <j-keerthy@...com>
Cc: Mark Brown <broonie@...nel.org>, broonie@...nel.org,
lgirdwood@...il.com, lee.jones@...aro.org,
linux-kernel@...r.kernel.org, linux-omap@...r.kernel.org,
devicetree@...r.kernel.org, robh+dt@...nel.org,
mark.rutland@....com, j-keerthy@...com
Subject: Applied "regulator: lp873x: Add support for lp873x PMIC regulators" to the regulator tree
The patch
regulator: lp873x: Add support for lp873x PMIC regulators
has been applied to the regulator tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 994aae32b13e373dcbe001af33d5b01379483463 Mon Sep 17 00:00:00 2001
From: Keerthy <j-keerthy@...com>
Date: Tue, 10 May 2016 09:34:39 +0530
Subject: [PATCH] regulator: lp873x: Add support for lp873x PMIC regulators
The regulators set consists of 2 BUCKs and 2 LDOs. The output
voltages are configurable and are meant to supply power to the
main processor and other components. The ramp delay is configurable
for both BUCKs.
Signed-off-by: Keerthy <j-keerthy@...com>
Signed-off-by: Mark Brown <broonie@...nel.org>
---
drivers/regulator/Kconfig | 9 ++
drivers/regulator/Makefile | 1 +
drivers/regulator/lp873x-regulator.c | 241 +++++++++++++++++++++++++++++++++++
3 files changed, 251 insertions(+)
create mode 100644 drivers/regulator/lp873x-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index c77dc08b1202..4d2d737f8c7e 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -321,6 +321,15 @@ config REGULATOR_LP872X
help
This driver supports LP8720/LP8725 PMIC
+config REGULATOR_LP873X
+ tristate "TI LP873X Power regulators"
+ depends on MFD_LP873X && OF
+ help
+ This driver supports LP873X voltage regulator chips. LP873X
+ provides two step-down converters and two general-purpose LDO
+ voltage regulators. It supports software based voltage control
+ for different voltage domains
+
config REGULATOR_LP8755
tristate "TI LP8755 High Performance PMU driver"
depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 61bfbb9d4a0c..7182b5f7c3e7 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_REGULATOR_LM363X) += lm363x-regulator.o
obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o
obj-$(CONFIG_REGULATOR_LP872X) += lp872x.o
+obj-$(CONFIG_REGULATOR_LP873X) += lp873x-regulator.o
obj-$(CONFIG_REGULATOR_LP8788) += lp8788-buck.o
obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o
obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o
diff --git a/drivers/regulator/lp873x-regulator.c b/drivers/regulator/lp873x-regulator.c
new file mode 100644
index 000000000000..b4ffd113ba21
--- /dev/null
+++ b/drivers/regulator/lp873x-regulator.c
@@ -0,0 +1,241 @@
+/*
+ * Regulator driver for LP873X PMIC
+ *
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License version 2 for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <linux/mfd/lp873x.h>
+
+#define LP873X_REGULATOR(_name, _id, _of, _ops, _n, _vr, _vm, _er, _em, \
+ _delay, _lr, _nlr, _cr) \
+ [_id] = { \
+ .desc = { \
+ .name = _name, \
+ .id = _id, \
+ .of_match = of_match_ptr(_of), \
+ .regulators_node = of_match_ptr("regulators"),\
+ .ops = &_ops, \
+ .n_voltages = _n, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .vsel_reg = _vr, \
+ .vsel_mask = _vm, \
+ .enable_reg = _er, \
+ .enable_mask = _em, \
+ .ramp_delay = _delay, \
+ .linear_ranges = _lr, \
+ .n_linear_ranges = _nlr, \
+ }, \
+ .ctrl2_reg = _cr, \
+ }
+
+struct lp873x_regulator {
+ struct regulator_desc desc;
+ unsigned int ctrl2_reg;
+};
+
+static const struct lp873x_regulator regulators[];
+
+static const struct regulator_linear_range buck0_buck1_ranges[] = {
+ REGULATOR_LINEAR_RANGE(0, 0x0, 0x13, 0),
+ REGULATOR_LINEAR_RANGE(700000, 0x14, 0x17, 10000),
+ REGULATOR_LINEAR_RANGE(735000, 0x18, 0x9d, 5000),
+ REGULATOR_LINEAR_RANGE(1420000, 0x9e, 0xff, 20000),
+};
+
+static const struct regulator_linear_range ldo0_ldo1_ranges[] = {
+ REGULATOR_LINEAR_RANGE(800000, 0x0, 0x19, 100000),
+};
+
+static unsigned int lp873x_buck_ramp_delay[] = {
+ 30000, 15000, 10000, 7500, 3800, 1900, 940, 470
+};
+
+/* LP873X BUCK current limit */
+static const unsigned int lp873x_buck_uA[] = {
+ 1500000, 2000000, 2500000, 3000000, 3500000, 4000000,
+};
+
+static int lp873x_buck_set_ramp_delay(struct regulator_dev *rdev,
+ int ramp_delay)
+{
+ int id = rdev_get_id(rdev);
+ struct lp873x *lp873 = rdev_get_drvdata(rdev);
+ unsigned int reg;
+ int ret;
+
+ if (ramp_delay <= 470)
+ reg = 7;
+ else if (ramp_delay <= 940)
+ reg = 6;
+ else if (ramp_delay <= 1900)
+ reg = 5;
+ else if (ramp_delay <= 3800)
+ reg = 4;
+ else if (ramp_delay <= 7500)
+ reg = 3;
+ else if (ramp_delay <= 10000)
+ reg = 2;
+ else if (ramp_delay <= 15000)
+ reg = 1;
+ else
+ reg = 0;
+
+ ret = regmap_update_bits(lp873->regmap, regulators[id].ctrl2_reg,
+ LP873X_BUCK0_CTRL_2_BUCK0_SLEW_RATE,
+ reg << __ffs(LP873X_BUCK0_CTRL_2_BUCK0_SLEW_RATE));
+ if (ret) {
+ dev_err(lp873->dev, "SLEW RATE write failed: %d\n", ret);
+ return ret;
+ }
+
+ rdev->constraints->ramp_delay = lp873x_buck_ramp_delay[reg];
+
+ return 0;
+}
+
+static int lp873x_buck_set_current_limit(struct regulator_dev *rdev,
+ int min_uA, int max_uA)
+{
+ int id = rdev_get_id(rdev);
+ struct lp873x *lp873 = rdev_get_drvdata(rdev);
+ int i;
+
+ for (i = ARRAY_SIZE(lp873x_buck_uA) - 1; i >= 0; i--) {
+ if (lp873x_buck_uA[i] >= min_uA &&
+ lp873x_buck_uA[i] <= max_uA)
+ return regmap_update_bits(lp873->regmap,
+ regulators[id].ctrl2_reg,
+ LP873X_BUCK0_CTRL_2_BUCK0_ILIM,
+ i << __ffs(LP873X_BUCK0_CTRL_2_BUCK0_ILIM));
+ }
+
+ return -EINVAL;
+}
+
+static int lp873x_buck_get_current_limit(struct regulator_dev *rdev)
+{
+ int id = rdev_get_id(rdev);
+ struct lp873x *lp873 = rdev_get_drvdata(rdev);
+ int ret;
+ unsigned int val;
+
+ ret = regmap_read(lp873->regmap, regulators[id].ctrl2_reg, &val);
+ if (ret)
+ return ret;
+
+ val = (val & LP873X_BUCK0_CTRL_2_BUCK0_ILIM) >>
+ __ffs(LP873X_BUCK0_CTRL_2_BUCK0_ILIM);
+
+ return (val < ARRAY_SIZE(lp873x_buck_uA)) ?
+ lp873x_buck_uA[val] : -EINVAL;
+}
+
+/* Operations permitted on BUCK0, BUCK1 */
+static struct regulator_ops lp873x_buck01_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_ramp_delay = lp873x_buck_set_ramp_delay,
+ .set_current_limit = lp873x_buck_set_current_limit,
+ .get_current_limit = lp873x_buck_get_current_limit,
+};
+
+/* Operations permitted on LDO0 and LDO1 */
+static struct regulator_ops lp873x_ldo01_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+};
+
+static const struct lp873x_regulator regulators[] = {
+ LP873X_REGULATOR("BUCK0", LP873X_BUCK_0, "buck0", lp873x_buck01_ops,
+ 256, LP873X_REG_BUCK0_VOUT,
+ LP873X_BUCK0_VOUT_BUCK0_VSET, LP873X_REG_BUCK0_CTRL_1,
+ LP873X_BUCK0_CTRL_1_BUCK0_EN, 10000,
+ buck0_buck1_ranges, 4, LP873X_REG_BUCK0_CTRL_2),
+ LP873X_REGULATOR("BUCK1", LP873X_BUCK_1, "buck1", lp873x_buck01_ops,
+ 256, LP873X_REG_BUCK1_VOUT,
+ LP873X_BUCK1_VOUT_BUCK1_VSET, LP873X_REG_BUCK1_CTRL_1,
+ LP873X_BUCK1_CTRL_1_BUCK1_EN, 10000,
+ buck0_buck1_ranges, 4, LP873X_REG_BUCK1_CTRL_2),
+ LP873X_REGULATOR("LDO0", LP873X_LDO_0, "ldo0", lp873x_ldo01_ops, 26,
+ LP873X_REG_LDO0_VOUT, LP873X_LDO0_VOUT_LDO0_VSET,
+ LP873X_REG_LDO0_CTRL,
+ LP873X_LDO0_CTRL_LDO0_EN, 0, ldo0_ldo1_ranges, 1,
+ 0xFF),
+ LP873X_REGULATOR("LDO1", LP873X_LDO_1, "ldo1", lp873x_ldo01_ops, 26,
+ LP873X_REG_LDO1_VOUT, LP873X_LDO1_VOUT_LDO1_VSET,
+ LP873X_REG_LDO1_CTRL,
+ LP873X_LDO1_CTRL_LDO1_EN, 0, ldo0_ldo1_ranges, 1,
+ 0xFF),
+};
+
+static int lp873x_regulator_probe(struct platform_device *pdev)
+{
+ struct lp873x *lp873 = dev_get_drvdata(pdev->dev.parent);
+ struct regulator_config config = { };
+ struct regulator_dev *rdev;
+ int i;
+
+ platform_set_drvdata(pdev, lp873);
+
+ config.dev = &pdev->dev;
+ config.dev->of_node = lp873->dev->of_node;
+ config.driver_data = lp873;
+ config.regmap = lp873->regmap;
+
+ for (i = 0; i < ARRAY_SIZE(regulators); i++) {
+ rdev = devm_regulator_register(&pdev->dev, ®ulators[i].desc,
+ &config);
+ if (IS_ERR(rdev)) {
+ dev_err(lp873->dev, "failed to register %s regulator\n",
+ pdev->name);
+ return PTR_ERR(rdev);
+ }
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id lp873x_regulator_id_table[] = {
+ { "lp873x-regulator", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, lp873x_regulator_id_table);
+
+static struct platform_driver lp873x_regulator_driver = {
+ .driver = {
+ .name = "lp873x-pmic",
+ },
+ .probe = lp873x_regulator_probe,
+ .id_table = lp873x_regulator_id_table,
+};
+module_platform_driver(lp873x_regulator_driver);
+
+MODULE_AUTHOR("J Keerthy <j-keerthy@...com>");
+MODULE_DESCRIPTION("LP873X voltage regulator driver");
+MODULE_ALIAS("platform:lp873x-pmic");
+MODULE_LICENSE("GPL v2");
--
2.8.1
Powered by blists - more mailing lists