[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <2477327.hJjg0APDhg@phil>
Date: Wed, 11 May 2016 20:26:52 +0200
From: Heiko Stuebner <heiko@...ech.de>
To: David Wu <david.wu@...k-chips.com>
Cc: wsa@...-dreams.de, robh+dt@...nel.org, dianders@...omium.org,
andy.shevchenko@...il.com, pawel.moll@....com,
mark.rutland@....com, ijc+devicetree@...lion.org.uk,
galak@...eaurora.org, briannorris@...gle.com,
davidriley@...gle.com, huangtao@...k-chips.com, hl@...k-chips.com,
xjq@...k-chips.com, zyw@...k-chips.com, cf@...k-chips.com,
linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, linux-i2c@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v8 3/8] i2c: rk3x: Remove redundant rk3x_i2c_clean_ipd()
Am Mittwoch, 11. Mai 2016, 03:24:07 schrieb David Wu:
> Call rk3x_i2c_setup() before rk3x_i2c_start()
That beginning of the sentence could use a tiny improvement, like
----
rk3x_i2c_setup() gets called directly before rk3x_i2c_start()
----
to make it obvious what happens in the code.
But a nice small improvement
Reviewed-by: Heiko Stuebner <heiko@...ech.de>
> and the last thing in setup was to clean the IPD,
> so no reason to do it at the beginning of start.
>
> Signed-off-by: David Wu <david.wu@...k-chips.com>
> Reviewed-by: Douglas Anderson <dianders@...omium.org>
> ---
> Change in v8:
> - none
>
> drivers/i2c/busses/i2c-rk3x.c | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
> index 1e2677a..9eeb4e5 100644
> --- a/drivers/i2c/busses/i2c-rk3x.c
> +++ b/drivers/i2c/busses/i2c-rk3x.c
> @@ -174,7 +174,6 @@ static void rk3x_i2c_start(struct rk3x_i2c *i2c)
> {
> u32 val;
>
> - rk3x_i2c_clean_ipd(i2c);
> i2c_writel(i2c, REG_INT_START, REG_IEN);
>
> /* enable adapter with correct mode, send START condition */
Powered by blists - more mailing lists