linux-kernel - [PATCH 3/3] irqchip: mips-gic: Setup EIC mode on each CPU if it's in use

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1463495466-29689-4-git-send-email-paul.burton@imgtec.com>
Date:	Tue, 17 May 2016 15:31:06 +0100
From:	Paul Burton <paul.burton@...tec.com>
To:	<linux-mips@...ux-mips.org>, Ralf Baechle <ralf@...ux-mips.org>
CC:	Matt Redfearn <matt.redfearn@...tec.com>,
	Paul Burton <paul.burton@...tec.com>,
	Marc Zyngier <marc.zyngier@....com>,
	Jason Cooper <jason@...edaemon.net>,
	Thomas Gleixner <tglx@...utronix.de>,
	<linux-kernel@...r.kernel.org>
Subject: [PATCH 3/3] irqchip: mips-gic: Setup EIC mode on each CPU if it's in use

When EIC mode is in use (cpu_has_veic is true) enable it on each CPU
during GIC initialisation. Otherwise there may be a mismatch between the
hardware default interrupt model & that expected by the kernel.

Signed-off-by: Paul Burton <paul.burton@...tec.com>
---

 drivers/irqchip/irq-mips-gic.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c
index 4dffccf..bc23c92 100644
--- a/drivers/irqchip/irq-mips-gic.c
+++ b/drivers/irqchip/irq-mips-gic.c
@@ -956,7 +956,7 @@ static void __init __gic_init(unsigned long gic_base_addr,
 			      unsigned int cpu_vec, unsigned int irqbase,
 			      struct device_node *node)
 {
-	unsigned int gicconfig;
+	unsigned int gicconfig, cpu;
 	unsigned int v[2];
 
 	__gic_base_addr = gic_base_addr;
@@ -973,6 +973,14 @@ static void __init __gic_init(unsigned long gic_base_addr,
 	gic_vpes = gic_vpes + 1;
 
 	if (cpu_has_veic) {
+		/* Set EIC mode for all VPEs */
+		for_each_present_cpu(cpu) {
+			gic_write(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR),
+				  mips_cm_vp_id(cpu));
+			gic_write(GIC_REG(VPE_OTHER, GIC_VPE_CTL),
+				  GIC_VPE_CTL_EIC_MODE_MSK);
+		}
+
 		/* Always use vector 1 in EIC mode */
 		gic_cpu_pin = 0;
 		timer_cpu_pin = gic_cpu_pin;
-- 
2.8.2