[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1463749405-11640-4-git-send-email-aleksey.makarov@linaro.org>
Date: Fri, 20 May 2016 16:03:22 +0300
From: Aleksey Makarov <aleksey.makarov@...aro.org>
To: "Rafael J . Wysocki" <rjw@...ysocki.net>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: linux-serial@...r.kernel.org, linux-acpi@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Aleksey Makarov <aleksey.makarov@...aro.org>,
Russell King <linux@....linux.org.uk>,
Len Brown <lenb@...nel.org>,
Leif Lindholm <leif.lindholm@...aro.org>,
Graeme Gregory <graeme.gregory@...aro.org>,
Al Stone <ahs3@...hat.com>,
Christopher Covington <cov@...eaurora.org>,
Yury Norov <ynorov@...iumnetworks.com>,
Peter Hurley <peter@...leysoftware.com>,
Andy Shevchenko <andy.shevchenko@...il.com>,
"Zheng, Lv" <lv.zheng@...el.com>, Mark Salter <msalter@...hat.com>,
Kefeng Wang <wangkefeng.wang@...wei.com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>
Subject: [PATCH v8 3/4] ARM64: ACPI: enable ACPI_SPCR_TABLE
SBBR mentions SPCR as a mandatory ACPI table. So enable it for ARM64
Earlycon should be set up as early as possible. ACPI boot tables are
mapped in arch/arm64/kernel/acpi.c:acpi_boot_table_init() that
is called from setup_arch() and that's where we parse SPCR.
So it has to be opted-in per-arch.
When ACPI_SPCR_TABLE is defined initialization of DT earlycon is
deferred until the DT/ACPI decision is done. Initialize DT earlycon
if ACPI is disabled.
Signed-off-by: Aleksey Makarov <aleksey.makarov@...aro.org>
Tested-by: Kefeng Wang <wangkefeng.wang@...wei.com>
---
arch/arm64/Kconfig | 1 +
arch/arm64/kernel/acpi.c | 11 ++++++++++-
2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 5d30abf..80c0816 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -4,6 +4,7 @@ config ARM64
select ACPI_GENERIC_GSI if ACPI
select ACPI_PCI_HOST_GENERIC if ACPI
select ACPI_REDUCED_HARDWARE_ONLY if ACPI
+ select ACPI_SPCR_TABLE if ACPI
select ARCH_HAS_DEVMEM_IS_ALLOWED
select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
select ARCH_HAS_ELF_RANDOMIZE
diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
index 3e4f1a4..252a6d9 100644
--- a/arch/arm64/kernel/acpi.c
+++ b/arch/arm64/kernel/acpi.c
@@ -24,6 +24,7 @@
#include <linux/memblock.h>
#include <linux/of_fdt.h>
#include <linux/smp.h>
+#include <linux/serial_core.h>
#include <asm/cputype.h>
#include <asm/cpu_ops.h>
@@ -206,7 +207,7 @@ void __init acpi_boot_table_init(void)
if (param_acpi_off ||
(!param_acpi_on && !param_acpi_force &&
of_scan_flat_dt(dt_scan_depth1_nodes, NULL)))
- return;
+ goto done;
/*
* ACPI is disabled at this point. Enable it in order to parse
@@ -226,6 +227,14 @@ void __init acpi_boot_table_init(void)
if (!param_acpi_force)
disable_acpi();
}
+
+done:
+ if (acpi_disabled) {
+ if (earlycon_init_is_deferred)
+ early_init_dt_scan_chosen_stdout();
+ } else {
+ parse_spcr(earlycon_init_is_deferred);
+ }
}
#ifdef CONFIG_ACPI_APEI
--
2.8.2
Powered by blists - more mailing lists