| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAJZ5v0hdoLTfjrD8+WxSoxM48dqbZK2KwY_h+63kHKHKgO=JFA@mail.gmail.com>
Date: Fri, 20 May 2016 22:42:55 +0200
From: "Rafael J. Wysocki" <rafael@...nel.org>
To: Aleksey Makarov <aleksey.makarov@...aro.org>
Cc: "Rafael J . Wysocki" <rjw@...ysocki.net>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"linux-serial@...r.kernel.org" <linux-serial@...r.kernel.org>,
ACPI Devel Maling List <linux-acpi@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
Russell King <linux@....linux.org.uk>,
Len Brown <lenb@...nel.org>,
Leif Lindholm <leif.lindholm@...aro.org>,
Graeme Gregory <graeme.gregory@...aro.org>,
Al Stone <ahs3@...hat.com>,
Christopher Covington <cov@...eaurora.org>,
Yury Norov <ynorov@...iumnetworks.com>,
Peter Hurley <peter@...leysoftware.com>,
Andy Shevchenko <andy.shevchenko@...il.com>,
"Zheng, Lv" <lv.zheng@...el.com>, Mark Salter <msalter@...hat.com>,
Kefeng Wang <wangkefeng.wang@...wei.com>,
Jiri Slaby <jslaby@...e.com>
Subject: Re: [PATCH v8 2/4] ACPI: parse SPCR and enable matching console
On Fri, May 20, 2016 at 3:03 PM, Aleksey Makarov
<aleksey.makarov@...aro.org> wrote:
> 'ARM Server Base Boot Requiremets' [1] mentions SPCR (Serial Port
> Console Redirection Table) [2] as a mandatory ACPI table that
> specifies the configuration of serial console.
>
> Defer initialization of DT earlycon until ACPI/DT decision is made.
>
> Parse the ACPI SPCR table, setup earlycon if required,
> enable specified console.
>
> Thanks to Peter Hurley for explaining how this should work.
>
> [1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.den0044a/index.html
> [2] https://msdn.microsoft.com/en-us/library/windows/hardware/dn639132(v=vs.85).aspx
>
> Signed-off-by: Aleksey Makarov <aleksey.makarov@...aro.org>
> Reviewed-by: Peter Hurley <peter@...leysoftware.com>
> Tested-by: Kefeng Wang <wangkefeng.wang@...wei.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
for the ACPI part.
> ---
> drivers/acpi/Kconfig | 3 ++
> drivers/acpi/Makefile | 1 +
> drivers/acpi/spcr.c | 111 ++++++++++++++++++++++++++++++++++++++++++
> drivers/tty/serial/earlycon.c | 19 +++++++-
> include/linux/acpi.h | 6 +++
> include/linux/serial_core.h | 6 +++
> 6 files changed, 144 insertions(+), 2 deletions(-)
> create mode 100644 drivers/acpi/spcr.c
>
> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
> index c204344..c8c02f1 100644
> --- a/drivers/acpi/Kconfig
> +++ b/drivers/acpi/Kconfig
> @@ -77,6 +77,9 @@ config ACPI_DEBUGGER_USER
>
> endif
>
> +config ACPI_SPCR_TABLE
> + bool
> +
> config ACPI_SLEEP
> bool
> depends on SUSPEND || HIBERNATION
> diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
> index 8b08e20..d0dc940 100644
> --- a/drivers/acpi/Makefile
> +++ b/drivers/acpi/Makefile
> @@ -82,6 +82,7 @@ obj-$(CONFIG_ACPI_EC_DEBUGFS) += ec_sys.o
> obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o
> obj-$(CONFIG_ACPI_BGRT) += bgrt.o
> obj-$(CONFIG_ACPI_CPPC_LIB) += cppc_acpi.o
> +obj-$(CONFIG_ACPI_SPCR_TABLE) += spcr.o
> obj-$(CONFIG_ACPI_DEBUGGER_USER) += acpi_dbg.o
>
> # processor has its own "processor." module_param namespace
> diff --git a/drivers/acpi/spcr.c b/drivers/acpi/spcr.c
> new file mode 100644
> index 0000000..f4cfc5c
> --- /dev/null
> +++ b/drivers/acpi/spcr.c
> @@ -0,0 +1,111 @@
> +/*
> + * Copyright (c) 2012, Intel Corporation
> + * Copyright (c) 2015, Red Hat, Inc.
> + * Copyright (c) 2015, 2016 Linaro Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#define pr_fmt(fmt) "ACPI: SPCR: " fmt
> +
> +#include <linux/acpi.h>
> +#include <linux/console.h>
> +#include <linux/kernel.h>
> +#include <linux/serial_core.h>
> +
> +/**
> + * parse_spcr() - parse ACPI SPCR table and add preferred console
> + *
> + * @earlycon: set up earlycon for the console specified by the table
> + *
> + * For the architectures with support for ACPI, CONFIG_ACPI_SPCR_TABLE may be
> + * defined to parse ACPI SPCR table. As a result of the parsing preferred
> + * console is registered and if @earlycon is true, earlycon is set up.
> + *
> + * When CONFIG_ACPI_SPCR_TABLE is defined, this function should be called
> + * from arch inintialization code as soon as the DT/ACPI decision is made.
> + *
> + */
> +int __init parse_spcr(bool earlycon)
> +{
> + static char opts[64];
> + struct acpi_table_spcr *table;
> + acpi_size table_size;
> + acpi_status status;
> + char *uart;
> + char *iotype;
> + int baud_rate;
> + int err;
> +
> + if (acpi_disabled)
> + return -ENODEV;
> +
> + status = acpi_get_table_with_size(ACPI_SIG_SPCR, 0,
> + (struct acpi_table_header **)&table,
> + &table_size);
> +
> + if (ACPI_FAILURE(status))
> + return -ENOENT;
> +
> + if (table->header.revision < 2) {
> + err = -ENOENT;
> + pr_err("wrong table version\n");
> + goto done;
> + }
> +
> + iotype = table->serial_port.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY ?
> + "mmio" : "io";
> +
> + switch (table->interface_type) {
> + case ACPI_DBG2_ARM_SBSA_32BIT:
> + iotype = "mmio32";
> + /* fall through */
> + case ACPI_DBG2_ARM_PL011:
> + case ACPI_DBG2_ARM_SBSA_GENERIC:
> + case ACPI_DBG2_BCM2835:
> + uart = "pl011";
> + break;
> + case ACPI_DBG2_16550_COMPATIBLE:
> + case ACPI_DBG2_16550_SUBSET:
> + uart = "uart";
> + break;
> + default:
> + err = -ENOENT;
> + goto done;
> + }
> +
> + switch (table->baud_rate) {
> + case 3:
> + baud_rate = 9600;
> + break;
> + case 4:
> + baud_rate = 19200;
> + break;
> + case 6:
> + baud_rate = 57600;
> + break;
> + case 7:
> + baud_rate = 115200;
> + break;
> + default:
> + err = -ENOENT;
> + goto done;
> + }
> +
> + snprintf(opts, sizeof(opts), "%s,%s,0x%llx,%d", uart, iotype,
> + table->serial_port.address, baud_rate);
> +
> + pr_info("console: %s", opts);
> +
> + if (earlycon)
> + setup_earlycon(opts);
> +
> + err = add_preferred_console(uart, 0, opts + strlen(uart) + 1);
> +
> +done:
> + early_acpi_os_unmap_memory((void __iomem *)table, table_size);
> + return err;
> +}
> diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
> index 7aae655..ea00b9f 100644
> --- a/drivers/tty/serial/earlycon.c
> +++ b/drivers/tty/serial/earlycon.c
> @@ -21,6 +21,7 @@
> #include <linux/sizes.h>
> #include <linux/of.h>
> #include <linux/of_fdt.h>
> +#include <linux/acpi.h>
>
> #ifdef CONFIG_FIX_EARLYCON_MEM
> #include <asm/fixmap.h>
> @@ -199,6 +200,14 @@ int __init setup_earlycon(char *buf)
> return -ENOENT;
> }
>
> +/*
> + * When CONFIG_ACPI_SPCR_TABLE is defined, "earlycon" without parameters in
> + * command line does not start DT earlycon immediately, instead it defers
> + * starting it until DT/ACPI decision is made. At that time if ACPI is enabled
> + * call parse_spcr(), else call early_init_dt_scan_chosen_stdout()
> + */
> +bool earlycon_init_is_deferred __initdata;
> +
> /* early_param wrapper for setup_earlycon() */
> static int __init param_setup_earlycon(char *buf)
> {
> @@ -208,8 +217,14 @@ static int __init param_setup_earlycon(char *buf)
> * Just 'earlycon' is a valid param for devicetree earlycons;
> * don't generate a warning from parse_early_params() in that case
> */
> - if (!buf || !buf[0])
> - return early_init_dt_scan_chosen_stdout();
> + if (!buf || !buf[0]) {
> + if (IS_ENABLED(CONFIG_ACPI_SPCR_TABLE)) {
> + earlycon_init_is_deferred = true;
> + return 0;
> + } else {
> + return early_init_dt_scan_chosen_stdout();
> + }
> + }
>
> err = setup_earlycon(buf);
> if (err == -ENOENT || err == -EALREADY)
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index 288fac5..1de43be 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -997,4 +997,10 @@ static inline struct fwnode_handle *acpi_get_next_subnode(struct device *dev,
> #define acpi_probe_device_table(t) ({ int __r = 0; __r;})
> #endif
>
> +#ifdef CONFIG_ACPI_SPCR_TABLE
> +int parse_spcr(bool earlycon);
> +#else
> +static inline int parse_spcr(bool earlycon) { return 0; }
> +#endif
> +
> #endif /*_LINUX_ACPI_H*/
> diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
> index a3d7c0d..60b6143 100644
> --- a/include/linux/serial_core.h
> +++ b/include/linux/serial_core.h
> @@ -366,6 +366,12 @@ extern int of_setup_earlycon(const struct earlycon_id *match,
> unsigned long node,
> const char *options);
>
> +#ifdef CONFIG_SERIAL_EARLYCON
> +extern bool earlycon_init_is_deferred __initdata;
> +#else
> +static const bool earlycon_init_is_deferred;
> +#endif
> +
> struct uart_port *uart_get_console(struct uart_port *ports, int nr,
> struct console *c);
> int uart_parse_earlycon(char *p, unsigned char *iotype, unsigned long *addr,
> --
Powered by blists - more mailing lists