linux-kernel - [PATCH 2/2] usb: musb: Stop bulk endpoint while queue is rotated

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1463755902-12922-3-git-send-email-andrew.goodbody@cambrionix.com>
Date:	Fri, 20 May 2016 15:51:42 +0100
From:	Andrew Goodbody <andrew.goodbody@...brionix.com>
To:	<b-liu@...com>
CC:	<gregkh@...uxfoundation.org>, <linux-usb@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>,
	Andrew Goodbody <andrew.goodbody@...brionix.com>,
	<stable@...r.kernel.org>
Subject: [PATCH 2/2] usb: musb: Stop bulk endpoint while queue is rotated

Ensure that the endpoint is stopped by clearing REQPKT before
clearing DATAERR_NAKTIMEOUT before rotating the queue on the
dedicated bulk endpoint.
This addresses an issue where a race could result in the endpoint
receiving data before it was reprogrammed resulting in a warning
about such data from musb_rx_reinit before it was thrown away.
The data thrown away was a valid packet that had been correctly
ACKed which meant the host and device got out of sync.

Signed-off-by: Andrew Goodbody <andrew.goodbody@...brionix.com>
Cc: stable@...r.kernel.org
---
 drivers/usb/musb/musb_host.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 30e0d65..777ff30 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -999,6 +999,8 @@ static void musb_bulk_nak_timeout(struct musb *musb, struct musb_hw_ep *ep,
 		/* clear nak timeout bit */
 		rx_csr = musb_readw(epio, MUSB_RXCSR);
 		rx_csr |= MUSB_RXCSR_H_WZC_BITS;
+		rx_csr &= ~MUSB_RXCSR_H_REQPKT;
+		musb_writew(epio, MUSB_RXCSR, rx_csr);
 		rx_csr &= ~MUSB_RXCSR_DATAERROR;
 		musb_writew(epio, MUSB_RXCSR, rx_csr);
 
-- 
2.7.4