lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1463755902-12922-2-git-send-email-andrew.goodbody@cambrionix.com>
Date:	Fri, 20 May 2016 15:51:41 +0100
From:	Andrew Goodbody <andrew.goodbody@...brionix.com>
To:	<b-liu@...com>
CC:	<gregkh@...uxfoundation.org>, <linux-usb@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>,
	Andrew Goodbody <andrew.goodbody@...brionix.com>,
	<stable@...r.kernel.org>
Subject: [PATCH 1/2] usb: musb: Ensure rx reinit occurs for shared_fifo endpoints

shared_fifo endpoints would only get a previous tx state cleared
out, the rx state was only cleared for non shared_fifo endpoints
Change this so that the rx state is cleared for all endpoints.
This addresses an issue that resulted in rx packets being dropped
silently.

Signed-off-by: Andrew Goodbody <andrew.goodbody@...brionix.com>
Cc: stable@...r.kernel.org
---
 drivers/usb/musb/musb_host.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 2f8ad7f..30e0d65 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -594,14 +594,15 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, u8 epnum)
 		musb_writew(ep->regs, MUSB_TXCSR, 0);
 
 	/* scrub all previous state, clearing toggle */
-	} else {
-		csr = musb_readw(ep->regs, MUSB_RXCSR);
-		if (csr & MUSB_RXCSR_RXPKTRDY)
-			WARNING("rx%d, packet/%d ready?\n", ep->epnum,
-				musb_readw(ep->regs, MUSB_RXCOUNT));
-
-		musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG);
 	}
+	csr = musb_readw(ep->regs, MUSB_RXCSR);
+	if (csr & MUSB_RXCSR_RXPKTRDY) {
+		WARNING("rx%d, packet/%d ready?\n", ep->epnum,
+			musb_readw(ep->regs, MUSB_RXCOUNT));
+		urb_qh_dump(musb);
+	}
+
+	musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG);
 
 	/* target addr and (for multipoint) hub addr/port */
 	if (musb->is_multipoint) {
-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ