[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <e6c6407c-6a46-55c8-c048-cce4fc0e7fa8@cogentembedded.com>
Date: Fri, 27 May 2016 14:54:16 +0300
From: Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
To: William Wu <william.wu@...k-chips.com>, gregkh@...uxfoundation.org,
balbi@...nel.org, heiko@...ech.de
Cc: linux-rockchip@...ts.infradead.org, briannorris@...gle.com,
dianders@...gle.com, kever.yang@...k-chips.com,
huangtao@...k-chips.com, frank.wang@...k-chips.com,
eddie.cai@...k-chips.com, John.Youn@...opsys.com,
linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org
Subject: Re: [PATCH v3 5/5] usb: dwc3: rockchip: add devicetree bindings
documentation
Hello.
On 5/27/2016 2:31 PM, William Wu wrote:
> This patch documents the device tree documentation required for
Documents the documentation? :-)
> Rockchip USB3.0 core wrapper consist of USB3.0 IP from Synopsys.
Consisting?
> It could operate in device mode (SS, HS, FS) and host
> mode (SS, HS, FS, LS).
>
> Signed-off-by: William Wu <william.wu@...k-chips.com>
> ---
> Changes in v3:
> - add dwc3 address (Felipe)
>
> Changes in v2:
> - add rockchip,dwc3.txt to Documentation/devicetree/bindings/ (Felipe, Brian)
>
>
> .../devicetree/bindings/usb/rockchip,dwc3.txt | 45 ++++++++++++++++++++++
> 1 file changed, 45 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
>
> diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
> new file mode 100644
> index 0000000..0bb52fe
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
> @@ -0,0 +1,45 @@
> +Rockchip SuperSpeed DWC3 USB SoC controller
> +
> +Required properties:
> +- compatible: should contain "rockchip,dwc3"
> +- clocks: A list of phandle + clock-specifier pairs for the
> + clocks listed in clock-names
> +- clock-names: Should contain the following:
> + "clk_usb3otg0_ref" Controller reference clk
> + "clk_usb3otg0_suspend"Controller suspend clk, can use 24 MHz or 32 KHz
> + "aclk_usb3" Master/Core clock, have to be >= 62.5 MHz for SS operation
> +
> +
> +Optional clocks:
> + "aclk_usb3otg0" Aclk for specific usb controller clock.
> + "aclk_usb3_rksoc_axi_perf" USB AXI perf clock. Not present on all platforms.
> + "aclk_usb3_grf" USB grf clock. Not present on all platforms.
> +
> +Required child node:
> +A child node must exist to represent the core DWC3 IP block. The name of
> +the node is not important. The content of the node is defined in dwc3.txt.
> +
> +Phy documentation is provided in the following places:
PHY.
[...]
MBR, Sergei
Powered by blists - more mailing lists