linux-kernel - [PATCH 4.6 027/100] irqchip/gic-v3: Configure all interrupts as non-secure Group-1

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20160530204909.325250148@linuxfoundation.org>
Date:	Mon, 30 May 2016 13:49:22 -0700
From:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:	linux-kernel@...r.kernel.org
Cc:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	stable@...r.kernel.org, Peter Maydell <peter.maydell@...aro.org>,
	Marc Zyngier <marc.zyngier@....com>
Subject: [PATCH 4.6 027/100] irqchip/gic-v3: Configure all interrupts as non-secure Group-1

4.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marc Zyngier <marc.zyngier@....com>

commit 7c9b973061b03af62734f613f6abec46c0dd4a88 upstream.

The GICv3 driver wrongly assumes that it runs on the non-secure
side of a secure-enabled system, while it could be on a system
with a single security state, or a GICv3 with GICD_CTLR.DS set.

Either way, it is important to configure this properly, or
interrupts will simply not be delivered on this HW.

Reported-by: Peter Maydell <peter.maydell@...aro.org>
Tested-by: Peter Maydell <peter.maydell@...aro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@....com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/irqchip/irq-gic-v3.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -390,6 +390,15 @@ static void __init gic_dist_init(void)
 	writel_relaxed(0, base + GICD_CTLR);
 	gic_dist_wait_for_rwp();
 
+	/*
+	 * Configure SPIs as non-secure Group-1. This will only matter
+	 * if the GIC only has a single security state. This will not
+	 * do the right thing if the kernel is running in secure mode,
+	 * but that's not the intended use case anyway.
+	 */
+	for (i = 32; i < gic_data.irq_nr; i += 32)
+		writel_relaxed(~0, base + GICD_IGROUPR + i / 8);
+
 	gic_dist_config(base, gic_data.irq_nr, gic_dist_wait_for_rwp);
 
 	/* Enable distributor with ARE, Group1 */
@@ -507,6 +516,9 @@ static void gic_cpu_init(void)
 
 	rbase = gic_data_rdist_sgi_base();
 
+	/* Configure SGIs/PPIs as non-secure Group-1 */
+	writel_relaxed(~0, rbase + GICR_IGROUPR0);
+
 	gic_cpu_config(rbase, gic_redist_wait_for_rwp);
 
 	/* Give LPIs a spin */