[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CANLsYkyef0Zkvrt+7a9N2YD3z8vPSoR_m1pq5nBRRKn1Ns1LOw@mail.gmail.com>
Date: Tue, 31 May 2016 11:57:58 -0600
From: Mathieu Poirier <mathieu.poirier@...aro.org>
To: Suzuki K Poulose <suzuki.poulose@....com>
Cc: "linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 4/5] coresight: Add better messages for coresight_timeout
On 31 May 2016 at 05:57, Suzuki K Poulose <suzuki.poulose@....com> wrote:
> When we encounter a timeout waiting for a status change via
> coresight_timeout, the caller always print the offset which
> was tried. This is pretty much useless as it doesn't specify
> the bit position we wait for. Also, one needs to lookup the
> TRM to figure out, what was wrong. This patch changes all
> such error messages to print something more meaningful.
>
> Cc: Mathieu Poirier <mathieu.poirier@...aro.org>
> Signed-off-by: Suzuki K Poulose <suzuki.poulose@....com>
> ---
> drivers/hwtracing/coresight/coresight-etb10.c | 6 ++----
> drivers/hwtracing/coresight/coresight-etm4x.c | 6 ++----
> drivers/hwtracing/coresight/coresight-tmc.c | 6 ++----
> 3 files changed, 6 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/hwtracing/coresight/coresight-etb10.c b/drivers/hwtracing/coresight/coresight-etb10.c
> index 4d20b0b..6bd4b93 100644
> --- a/drivers/hwtracing/coresight/coresight-etb10.c
> +++ b/drivers/hwtracing/coresight/coresight-etb10.c
> @@ -184,8 +184,7 @@ static void etb_disable_hw(struct etb_drvdata *drvdata)
>
> if (coresight_timeout(drvdata->base, ETB_FFCR, ETB_FFCR_BIT, 0)) {
> dev_err(drvdata->dev,
> - "timeout observed when probing at offset %#x\n",
> - ETB_FFCR);
> + "timeout while waiting for completion of Manual Flush\n");
> }
>
> /* disable trace capture */
> @@ -193,8 +192,7 @@ static void etb_disable_hw(struct etb_drvdata *drvdata)
>
> if (coresight_timeout(drvdata->base, ETB_FFSR, ETB_FFSR_BIT, 1)) {
> dev_err(drvdata->dev,
> - "timeout observed when probing at offset %#x\n",
> - ETB_FFCR);
> + "timeout while waiting for Formatter to Stop\n");
> }
>
> CS_LOCK(drvdata->base);
> diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c
> index 88947f3..e494042 100644
> --- a/drivers/hwtracing/coresight/coresight-etm4x.c
> +++ b/drivers/hwtracing/coresight/coresight-etm4x.c
> @@ -111,8 +111,7 @@ static void etm4_enable_hw(void *info)
> /* wait for TRCSTATR.IDLE to go up */
> if (coresight_timeout(drvdata->base, TRCSTATR, TRCSTATR_IDLE_BIT, 1))
> dev_err(drvdata->dev,
> - "timeout observed when probing at offset %#x\n",
> - TRCSTATR);
> + "timeout when waiting for Idle Trace Status\n");
>
> writel_relaxed(config->pe_sel, drvdata->base + TRCPROCSELR);
> writel_relaxed(config->cfg, drvdata->base + TRCCONFIGR);
> @@ -184,8 +183,7 @@ static void etm4_enable_hw(void *info)
> /* wait for TRCSTATR.IDLE to go back down to '0' */
> if (coresight_timeout(drvdata->base, TRCSTATR, TRCSTATR_IDLE_BIT, 0))
> dev_err(drvdata->dev,
> - "timeout observed when probing at offset %#x\n",
> - TRCSTATR);
> + "timeout when waiting for Idle Trace Status\n");
>
> CS_LOCK(drvdata->base);
>
> diff --git a/drivers/hwtracing/coresight/coresight-tmc.c b/drivers/hwtracing/coresight/coresight-tmc.c
> index 9e02ac9..c7d8ba6 100644
> --- a/drivers/hwtracing/coresight/coresight-tmc.c
> +++ b/drivers/hwtracing/coresight/coresight-tmc.c
> @@ -38,8 +38,7 @@ void tmc_wait_for_tmcready(struct tmc_drvdata *drvdata)
> if (coresight_timeout(drvdata->base,
> TMC_STS, TMC_STS_TMCREADY_BIT, 1)) {
> dev_err(drvdata->dev,
> - "timeout observed when probing at offset %#x\n",
> - TMC_STS);
> + "timeout observed when waiting for TMC to be Ready\n");
> }
> }
>
> @@ -56,8 +55,7 @@ void tmc_flush_and_stop(struct tmc_drvdata *drvdata)
> if (coresight_timeout(drvdata->base,
> TMC_FFCR, TMC_FFCR_FLUSHMAN_BIT, 0)) {
> dev_err(drvdata->dev,
> - "timeout observed when probing at offset %#x\n",
> - TMC_FFCR);
> + "timeout observed while waiting for completion of Manual Flush\n");
> }
>
> tmc_wait_for_tmcready(drvdata);
> --
> 1.9.1
>
I'm fine with this change but in all 3 files the beginning of the new
error message is different. Please select one and use it throughout.
Thanks,
Mathieu
Powered by blists - more mailing lists