[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20160601184125.20241-1-afd@ti.com>
Date: Wed, 1 Jun 2016 13:41:23 -0500
From: "Andrew F. Davis" <afd@...com>
To: Philipp Zabel <p.zabel@...gutronix.de>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>, Suman Anna <s-anna@...com>
CC: <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
"Andrew F. Davis" <afd@...com>
Subject: [PATCH v3 0/2] Add support for SYSCON reset
Some SoCs contain reset controls for modules that are memory-mapped to
areas shared with other module configuration settings. This requires
synchronization across all drivers accessing this memory area. This
series adds a generic SYSCON reset driver to allow resets toggled
by bits in memory-mapped registers through SYSCON.
Changes from v2:
- Rebased on v4.7-rc1
- Removed the need to give reset specifier nodes an index address
Changes from v1:
- Reset control information is now described in the reset node, this
keeps the reset information centralized for easy verification
- Other small fixups
Andrew F. Davis (2):
Documentation: dt: reset: Add syscon reset binding
reset: add a SYSCON based reset driver
.../devicetree/bindings/reset/syscon-reset.txt | 105 ++++++++
drivers/reset/Kconfig | 10 +
drivers/reset/Makefile | 1 +
drivers/reset/reset-syscon.c | 289 +++++++++++++++++++++
include/dt-bindings/reset/syscon.h | 23 ++
5 files changed, 428 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/syscon-reset.txt
create mode 100644 drivers/reset/reset-syscon.c
create mode 100644 include/dt-bindings/reset/syscon.h
--
2.8.3
Powered by blists - more mailing lists