| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5757E397.40401@arm.com>
Date: Wed, 8 Jun 2016 10:21:27 +0100
From: Marc Zyngier <marc.zyngier@....com>
To: Shawn Lin <shawn.lin@...k-chips.com>,
Bjorn Helgaas <bhelgaas@...gle.com>
Cc: linux-pci@...r.kernel.org, Arnd Bergmann <arnd@...db.de>,
linux-kernel@...r.kernel.org, linux-rockchip@...ts.infradead.org,
Heiko Stuebner <heiko@...ech.de>,
Doug Anderson <dianders@...omium.org>,
Wenrui Li <wenrui.li@...k-chips.com>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org
Subject: Re: [PATCH v2 2/2] PCI: Rockchip: Add Rockchip PCIe controller
support
On 08/06/16 09:05, Shawn Lin wrote:
> This patch adds Rockchip PCIe controller support found
> on RK3399 Soc platform.
>
> Signed-off-by: Shawn Lin <shawn.lin@...k-chips.com>
>
> ---
>
> Changes in v2:
> - remove phy related stuff and call phy API
> - add new head file and define lots of macro to make
> the code more readable
> - remove lots msi related code suggested by Marc
> - add IO window address translation
> - init_port and parse_dt reconstruction suggested by Bharat
> - improve wr_own_conf suggested by Arnd
> - make pcie as an interrupt controller and fix wrong int handler
> suggested by Marc
> - remove PCI_PROBE_ONLY suggested by Lorenzo
>
> drivers/pci/host/Kconfig | 11 +
> drivers/pci/host/Makefile | 1 +
> drivers/pci/host/pcie-rockchip.c | 1049 ++++++++++++++++++++++++++++++++++++++
> drivers/pci/host/pcie-rockchip.h | 209 ++++++++
> 4 files changed, 1270 insertions(+)
> create mode 100644 drivers/pci/host/pcie-rockchip.c
> create mode 100644 drivers/pci/host/pcie-rockchip.h
>
> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
> index 5d2374e..251f4ac 100644
> --- a/drivers/pci/host/Kconfig
> +++ b/drivers/pci/host/Kconfig
> @@ -245,4 +245,15 @@ config PCIE_ARMADA_8K
> Designware hardware and therefore the driver re-uses the
> Designware core functions to implement the driver.
>
> +config PCIE_ROCKCHIP
> + bool "Rockchip PCIe controller"
> + depends on ARM64 && ARCH_ROCKCHIP
> + depends on OF
> + select MFD_SYSCON
> + select PCI_MSI_IRQ_DOMAIN if PCI_MSI
> + help
> + Say Y here if you want internal PCI support on Rockchip SoC.
> + There are 1 internal PCIe port available to support GEN2 with
> + 4 slots.
> +
> endmenu
> diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
> index 9c8698e..c52985c 100644
> --- a/drivers/pci/host/Makefile
> +++ b/drivers/pci/host/Makefile
> @@ -29,3 +29,4 @@ obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
> obj-$(CONFIG_PCI_HOST_THUNDER_ECAM) += pci-thunder-ecam.o
> obj-$(CONFIG_PCI_HOST_THUNDER_PEM) += pci-thunder-pem.o
> obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
> +obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o
> diff --git a/drivers/pci/host/pcie-rockchip.c b/drivers/pci/host/pcie-rockchip.c
> new file mode 100644
> index 0000000..f491213
> --- /dev/null
> +++ b/drivers/pci/host/pcie-rockchip.c
[...]
> +static int rockchip_pcie_probe(struct platform_device *pdev)
> +{
> + struct rockchip_pcie_port *port;
> + struct device *dev = &pdev->dev;
> + struct pci_bus *bus, *child;
> + struct resource_entry *win;
> + int reg_no;
> + int err = 0;
> + int offset = 0;
> +
> + LIST_HEAD(res);
> +
> + if (!dev->of_node)
> + return -ENODEV;
> +
> + port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
> + if (!port)
> + return -ENOMEM;
> +
> + port->dev = dev;
> +
> + err = rockchip_pcie_parse_dt(port);
> + if (err)
> + return err;
> +
> + err = clk_prepare_enable(port->aclk_pcie);
> + if (err) {
> + dev_err(dev, "Unable to enable aclk_pcie clock.\n");
> + goto err_aclk_pcie;
> + }
> +
> + err = clk_prepare_enable(port->aclk_perf_pcie);
> + if (err) {
> + dev_err(dev, "Unable to enable aclk_perf_pcie clock.\n");
> + goto err_aclk_perf_pcie;
> + }
> +
> + err = clk_prepare_enable(port->hclk_pcie);
> + if (err) {
> + dev_err(dev, "Unable to enable hclk_pcie clock.\n");
> + goto err_hclk_pcie;
> + }
> +
> + err = clk_prepare_enable(port->clk_pcie_pm);
> + if (err) {
> + dev_err(dev, "Unable to enable hclk_pcie clock.\n");
> + goto err_pcie_pm;
> + }
> +
> + err = rockchip_pcie_set_vpcie(port);
> + if (err) {
> + dev_err(port->dev, "Fail to set vpcie regulator.\n");
> + goto err_set_vpcie;
> + }
> +
> + err = rockchip_pcie_init_port(port);
> + if (err)
> + goto err_vpcie;
> +
> + platform_set_drvdata(pdev, port);
> +
> + rockchip_pcie_enable_interrupts(port);
> + if (!IS_ENABLED(CONFIG_PCI_MSI)) {
> + err = rockchip_pcie_init_irq_domain(port);
> + if (err < 0)
> + goto err_vpcie;
Why are you excluding wired interrupts if you have PCI_MSI configured?
MSI allocation can fail, and wired interrupts become handy....
> + }
> +
> + err = of_pci_get_host_bridge_resources(dev->of_node, 0, 0xff,
> + &res, &port->io_base);
> + if (err)
> + goto err_vpcie;
> +
> + /* Get the I/O and memory ranges from DT */
> + resource_list_for_each_entry(win, &res) {
> + switch (resource_type(win->res)) {
> + case IORESOURCE_IO:
> + port->io = win->res;
> + port->io->name = "I/O";
> + port->io_size = resource_size(port->io);
> + port->io_bus_addr = port->io->start - win->offset;
> + err = pci_remap_iospace(port->io, port->io_base);
> + if (err) {
> + dev_warn(port->dev, "error %d: failed to map resource %pR\n",
> + err, port->io);
> + continue;
> + }
> + break;
> + case IORESOURCE_MEM:
> + port->mem = win->res;
> + port->mem->name = "MEM";
> + port->mem_size = resource_size(port->mem);
> + port->mem_bus_addr = port->mem->start - win->offset;
> + break;
> + case 0:
> + port->cfg = win->res;
> + break;
> + case IORESOURCE_BUS:
> + port->busn = win->res;
> + break;
> + default:
> + continue;
> + }
> + }
> +
> + for (reg_no = 0; reg_no < (port->mem_size >> 20); reg_no++) {
> + err = rockchip_pcie_prog_ob_atu(port, reg_no + 1,
> + AXI_WRAPPER_MEM_WRITE,
> + 20 - 1,
> + port->mem_bus_addr +
> + (reg_no << 20),
> + 0);
> + if (err) {
> + dev_err(dev, "Program RC mem outbound atu failed\n");
> + goto err_vpcie;
> + }
> + }
> +
> + err = rockchip_pcie_prog_ib_atu(port, 2, 32 - 1, 0x0, 0);
> + if (err) {
> + dev_err(dev, "Program RC mem inbound atu failed\n");
> + goto err_vpcie;
> + }
> +
> + offset = (port->mem_size >> 20);
> +
> + for (reg_no = 0; reg_no < (port->io_size >> 20); reg_no++) {
> + err = rockchip_pcie_prog_ob_atu(port,
> + reg_no + 1 + offset,
> + AXI_WRAPPER_IO_WRITE,
> + 20 - 1,
> + port->io_bus_addr +
> + (reg_no << 20),
> + 0);
> + if (err) {
> + dev_err(dev, "Program RC io outbound atu failed\n");
> + goto err_vpcie;
> + }
> + }
> +
> + port->root_bus_nr = port->busn->start;
> +
> + bus = pci_scan_root_bus(&pdev->dev, 0,
> + &rockchip_pcie_ops, port, &res);
> +
> + if (!bus) {
> + err = -ENOMEM;
> + goto err_vpcie;
> + }
> +
> + pci_bus_size_bridges(bus);
> + pci_bus_assign_resources(bus);
> + list_for_each_entry(child, &bus->children, node)
> + pcie_bus_configure_settings(child);
> +
> + pci_bus_add_devices(bus);
> +
> + return err;
> +
> +err_vpcie:
> + if (!IS_ERR(port->vpcie3v3))
> + regulator_disable(port->vpcie3v3);
> + if (!IS_ERR(port->vpcie1v8))
> + regulator_disable(port->vpcie1v8);
> + if (!IS_ERR(port->vpcie0v9))
> + regulator_disable(port->vpcie0v9);
> +err_set_vpcie:
> + clk_disable_unprepare(port->clk_pcie_pm);
> +err_pcie_pm:
> + clk_disable_unprepare(port->hclk_pcie);
> +err_hclk_pcie:
> + clk_disable_unprepare(port->aclk_perf_pcie);
> +err_aclk_perf_pcie:
> + clk_disable_unprepare(port->aclk_pcie);
> +err_aclk_pcie:
> + return err;
> +}
> +
> +static const struct of_device_id rockchip_pcie_of_match[] = {
> + { .compatible = "rockchip,rk3399-pcie", },
> + {}
> +};
> +
> +static struct platform_driver rockchip_pcie_driver = {
> + .driver = {
> + .name = "rockchip-pcie",
> + .of_match_table = rockchip_pcie_of_match,
> + .suppress_bind_attrs = true,
Why are you removing the bind/unbind attributes?
> + },
> + .probe = rockchip_pcie_probe,
> +};
> +module_platform_driver(rockchip_pcie_driver);
> +
> +MODULE_AUTHOR("Rockchip Inc");
> +MODULE_DESCRIPTION("Rockchip AXI PCIe driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/pci/host/pcie-rockchip.h b/drivers/pci/host/pcie-rockchip.h
> new file mode 100644
> index 0000000..738747c
> --- /dev/null
> +++ b/drivers/pci/host/pcie-rockchip.h
> @@ -0,0 +1,209 @@
> +/*
> + * Rockchip AXI PCIe host controller driver
> + *
> + * Copyright (c) 2016 Rockchip, Inc.
> + *
> + * Author: Shawn Lin <shawn.lin@...k-chips.com>
> + * Wenrui Li <wenrui.li@...k-chips.com>
> + *
> + * Bits taken from Synopsys Designware Host controller driver and
> + * ARM PCI Host generic driver.
> + *
> + * This program is free software: you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation, either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +#ifndef _PCIE_ROCKCHIP_H
> +#define _PCIE_ROCKCHIP_H
> +
> +#define PCIE_CLIENT_BASE 0x0
> +#define PCIE_RC_CONFIG_NORMAL_BASE 0x800000
> +#define PCIE_RC_CONFIG_BASE 0xa00000
> +#define PCIE_CORE_LINK_CTRL_STATUS 0x8000d0
> +#define PCIE_CORE_CTRL_MGMT_BASE 0x900000
> +#define PCIE_CORE_AXI_CONF_BASE 0xc00000
> +#define PCIE_CORE_AXI_INBOUND_BASE 0xc00800
> +
> +#define PCIE_CLIENT_BASIC_STATUS0 0x44
> +#define PCIE_CLIENT_BASIC_STATUS1 0x48
> +#define PCIE_CLIENT_INT_MASK 0x4c
> +#define PCIE_CLIENT_INT_STATUS 0x50
> +#define PCIE_RC_CONFIG_RID_CCR 0x8
> +#define PCIR_RC_CONFIG_LCS 0xd0
> +#define PCIE_RC_BAR_CONF 0x300
> +#define PCIE_CORE_OB_REGION_ADDR1 0x4
> +#define PCIE_CORE_OB_REGION_DESC0 0x8
> +#define PCIE_CORE_OB_REGION_DESC1 0xc
> +#define PCIE_RP_IB_ADDR_TRANS 0x4
> +#define PCIE_CORE_INT_MASK 0x900210
> +#define PCIE_CORE_INT_STATUS 0x90020c
> +
> +/* Size of one AXI Region (not Region 0) */
> +#define AXI_REGION_SIZE BIT(20)
> +/* Size of Region 0, equal to sum of sizes of other regions */
> +#define AXI_REGION_0_SIZE (32 * (0x1 << 20))
> +#define OB_REG_SIZE_SHIFT 5
> +#define IB_ROOT_PORT_REG_SIZE_SHIFT 3
> +
> +#define AXI_WRAPPER_IO_WRITE 0x6
> +#define AXI_WRAPPER_MEM_WRITE 0x2
> +#define MAX_AXI_IB_ROOTPORT_REGION_NUM 3
> +#define MIN_AXI_ADDR_BITS_PASSED 8
> +#define ROCKCHIP_VENDOR_ID 0x1d87
> +
> +#define PCIE_ECAM_BUS(x) (((x) & 0xFF) << 20)
> +#define PCIE_ECAM_DEV(x) (((x) & 0x1F) << 15)
> +#define PCIE_ECAM_FUNC(x) (((x) & 0x7) << 12)
> +#define PCIE_ECAM_REG(x) (((x) & 0xFFF) << 0)
> +#define PCIE_ECAM_ADDR(bus, dev, func, reg) \
> + (PCIE_ECAM_BUS(bus) | PCIE_ECAM_DEV(dev) | \
> + PCIE_ECAM_FUNC(func) | PCIE_ECAM_REG(reg))
> +
> +/*
> + * The higher 16-bit of this register is used for write protection
> + * only if BIT(x + 16) set to 1 the BIT(x) can be written.
> + */
> +#define HIWORD_UPDATE(val, mask, shift) \
> + ((val) << (shift) | (mask) << ((shift) + 16))
> +
> +#define RC_REGION_0_ADDR_TRANS_H 0x00000000
> +#define RC_REGION_0_ADDR_TRANS_L 0x00000000
> +#define RC_REGION_0_PASS_BITS (25 - 1)
> +#define RC_REGION_1_ADDR_TRANS_H 0x00000000
> +#define RC_REGION_1_ADDR_TRANS_L 0x00400000
> +#define RC_REGION_1_PASS_BITS (20 - 1)
> +#define MAX_AXI_WRAPPER_REGION_NUM 33
> +#define PCIE_CORE_LCSR_RETAIN_LINK BIT(5)
> +#define PCIE_CLIENT_CONF_ENABLE 1
> +#define PCIE_CLIENT_LINK_TRAIN_ENABLE 1
> +#define PCIE_CLIENT_ARI_ENABLE 1
> +#define PCIE_CLIENT_CONF_LANE_NUM(x) (x / 2)
> +#define PCIE_CLIENT_MODE_RC 1
> +#define PCIE_CLIENT_GEN_SEL_2 1
> +#define PCIE_CLIENT_GEN_SEL_1 0
> +#define PCIE_CLIENT_CONF_ENABLE_SHIFT 0
> +#define PCIE_CLIENT_CONF_ENABLE_MASK 0x1
> +#define PCIE_CLIENT_LINK_TRAIN_SHIFT 1
> +#define PCIE_CLIENT_LINK_TRAIN_MASK 0x1
> +#define PCIE_CLIENT_ARI_ENABLE_SHIFT 3
> +#define PCIE_CLIENT_ARI_ENABLE_MASK 0x1
> +#define PCIE_CLIENT_CONF_LANE_NUM_SHIFT 4
> +#define PCIE_CLIENT_CONF_LANE_NUM_MASK 0x3
> +#define PCIE_CLIENT_MODE_SHIFT 6
> +#define PCIE_CLIENT_MODE_MASK 0x1
> +#define PCIE_CLIENT_GEN_SEL_SHIFT 7
> +#define PCIE_CLIENT_GEN_SEL_MASK 0x1
> +#define PCIE_CLIENT_LINK_STATUS_UP 0x3
> +#define PCIE_CLIENT_LINK_STATUS_SHIFT 20
> +#define PCIE_CLIENT_LINK_STATUS_MASK 0x3
> +#define PCIE_CORE_PL_CONF_SPEED_25G 0x0
> +#define PCIE_CORE_PL_CONF_SPEED_50G 0x1
> +#define PCIE_CORE_PL_CONF_SPEED_80G 0x2
> +#define PCIE_CORE_PL_CONF_SPEED_SHIFT 3
> +#define PCIE_CORE_PL_CONF_SPEED_MASK 0x3
> +#define PCIE_CORE_PL_CONF_LANE_SHIFT 1
> +#define PCIE_CORE_PL_CONF_LANE_MASK 0x3
> +#define PCIE_CORE_RC_CONF_SCC_SHIFT 16
> +
> +/* PCIE_CLIENT_INT_STATUS */
> +#define PCIE_CLIENT_INT_LEGACY_DONE BIT(15)
> +#define PCIE_CLIENT_INT_MSG BIT(14)
> +#define PCIE_CLIENT_INT_HOT_RST BIT(13)
> +#define PCIE_CLIENT_INT_DPA BIT(12)
> +#define PCIE_CLIENT_INT_FATAL_ERR BIT(11)
> +#define PCIE_CLIENT_INT_NFATAL_ERR BIT(10)
> +#define PCIE_CLIENT_INT_CORR_ERR BIT(9)
> +#define PCIE_CLIENT_INT_INTD BIT(8)
> +#define PCIE_CLIENT_INT_INTC BIT(7)
> +#define PCIE_CLIENT_INT_INTB BIT(6)
> +#define PCIE_CLIENT_INT_INTA BIT(5)
> +#define PCIE_CLIENT_INT_LOCAL BIT(4)
> +#define PCIE_CLIENT_INT_UDMA BIT(3)
> +#define PCIE_CLIENT_INT_PHY BIT(2)
> +#define PCIE_CLIENT_INT_HOT_PLUG BIT(1)
> +#define PCIE_CLIENT_INT_PWR_STCG BIT(0)
> +#define PCIE_CORE_INT_PRFPE BIT(0)
> +#define PCIE_CORE_INT_CRFPE BIT(1)
> +#define PCIE_CORE_INT_RRPE BIT(2)
> +#define PCIE_CORE_INT_PRFO BIT(3)
> +#define PCIE_CORE_INT_CRFO BIT(4)
> +#define PCIE_CORE_INT_RT BIT(5)
> +#define PCIE_CORE_INT_RTR BIT(6)
> +#define PCIE_CORE_INT_PE BIT(7)
> +#define PCIE_CORE_INT_MTR BIT(8)
> +#define PCIE_CORE_INT_UCR BIT(9)
> +#define PCIE_CORE_INT_FCE BIT(10)
> +#define PCIE_CORE_INT_CT BIT(11)
> +#define PCIE_CORE_INT_UTC BIT(18)
> +#define PCIE_CORE_INT_MMVC BIT(19)
> +
> +#define ROCKCHIP_PCIE_RPIFR1_INTR_MASK GENMASK(8, 5)
> +#define ROCKCHIP_PCIE_RPIFR1_INTR_SHIFT 5
> +
> +#define PCIE_CORE_INT \
> + (PCIE_CORE_INT_PRFPE | PCIE_CORE_INT_CRFPE | \
> + PCIE_CORE_INT_RRPE | PCIE_CORE_INT_CRFO | \
> + PCIE_CORE_INT_RT | PCIE_CORE_INT_RTR | \
> + PCIE_CORE_INT_PE | PCIE_CORE_INT_MTR | \
> + PCIE_CORE_INT_UCR | PCIE_CORE_INT_FCE | \
> + PCIE_CORE_INT_CT | PCIE_CORE_INT_UTC | \
> + PCIE_CORE_INT_MMVC)
> +
> +#define PCIE_CLIENT_INT_SUBSYSTEM \
> + (PCIE_CLIENT_INT_PWR_STCG | PCIE_CLIENT_INT_HOT_PLUG | \
> + PCIE_CLIENT_INT_PHY | PCIE_CLIENT_INT_UDMA | \
> + PCIE_CLIENT_INT_LOCAL)
> +
> +#define PCIE_CLIENT_INT_LEGACY \
> + (PCIE_CLIENT_INT_INTA | PCIE_CLIENT_INT_INTB | \
> + PCIE_CLIENT_INT_INTC | PCIE_CLIENT_INT_INTD)
> +
> +#define PCIE_CLIENT_INT_CLI \
> + (PCIE_CLIENT_INT_CORR_ERR | PCIE_CLIENT_INT_NFATAL_ERR | \
> + PCIE_CLIENT_INT_FATAL_ERR | PCIE_CLIENT_INT_DPA | \
> + PCIE_CLIENT_INT_HOT_RST | PCIE_CLIENT_INT_MSG | \
> + PCIE_CLIENT_INT_LEGACY_DONE | PCIE_CLIENT_INT_LEGACY)
> +
> +struct rockchip_pcie_port {
> + void __iomem *reg_base;
> + void __iomem *apb_base;
> + struct phy *phy;
> + struct reset_control *core_rst;
> + struct reset_control *mgmt_rst;
> + struct reset_control *mgmt_sticky_rst;
> + struct reset_control *pipe_rst;
> + struct clk *aclk_pcie;
> + struct clk *aclk_perf_pcie;
> + struct clk *hclk_pcie;
> + struct clk *clk_pcie_pm;
> + struct regulator *vpcie3v3; /* 3.3V power supply */
> + struct regulator *vpcie1v8; /* 1.8V power supply */
> + struct regulator *vpcie0v9; /* 0.9V power supply */
> +#define VPCIE_3V3 3300000
> +#define VPCIE_1V8 1800000
> +#define VPCIE_0V9 900000
> + struct gpio_desc *ep_gpio;
> + u32 lanes;
> + resource_size_t io_base;
> + struct resource *cfg;
> + struct resource *io;
> + struct resource *mem;
> + struct resource *busn;
> + phys_addr_t io_bus_addr;
> + u32 io_size;
> + phys_addr_t mem_bus_addr;
> + u32 mem_size;
Most of these fields are set at probe time, and at most used once *in
the same function*. Some are assigned and never used... For those that
are actually used, please move them to local variables.
> + u8 root_bus_nr;
> + int irq;
This field is populated on init, and then never used. Same comment.
> + struct msi_controller *msi;
What is that used for? I though we agreed it served no purpose?
> +
> + struct device *dev;
> + struct irq_domain *irq_domain;
> +};
> +
> +static irqreturn_t rockchip_pcie_subsys_irq_handler(int irq, void *arg);
> +static irqreturn_t rockchip_pcie_client_irq_handler(int irq, void *arg);
> +static void rockchip_pcie_legacy_int_handler(struct irq_desc *desc);
> +
> +#endif
>
This include file serves no purpose on its own (nobody is going to
include it). Please consider merging it with the C code.
Thanks,
M.
--
Jazz is not dead. It just smells funny...
Powered by blists - more mailing lists