| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1465403688-17098-13-git-send-email-boris.brezillon@free-electrons.com>
Date: Wed, 8 Jun 2016 18:34:47 +0200
From: Boris Brezillon <boris.brezillon@...e-electrons.com>
To: Thierry Reding <thierry.reding@...il.com>,
linux-pwm@...r.kernel.org, Mark Brown <broonie@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>
Cc: Heiko Stuebner <heiko@...ech.de>,
linux-rockchip@...ts.infradead.org,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Milo Kim <milo.kim@...com>,
Doug Anderson <dianders@...gle.com>,
Caesar Wang <wxt@...k-chips.com>,
Stephen Barber <smbarber@...omium.org>,
Brian Norris <briannorris@...omium.org>,
Ajit Pal Singh <ajitpal.singh@...com>,
Srinivas Kandagatla <srinivas.kandagatla@...il.com>,
Maxime Coquelin <maxime.coquelin@...com>,
Patrice Chotard <patrice.chotard@...com>, kernel@...inux.com,
Laxman Dewangan <ldewangan@...dia.com>,
Boris Brezillon <boris.brezillon@...e-electrons.com>
Subject: [PATCH v2 12/13] regulator: pwm: Support extra continuous mode cases
The continuous mode allows one to declare a PWM regulator without having
to declare the voltage <-> dutycycle association table. It works fine as
long as your voltage(dutycycle) function is linear, but also has the
following constraints:
- dutycycle for min_uV = 0%
- dutycycle for max_uV = 100%
- dutycycle for min_uV < dutycycle for max_uV
While the linearity constraint is acceptable for now, we sometimes need to
restrict of the PWM range (to limit the maximum/minimum voltage for
example) or have a min_uV_dutycycle > max_uV_dutycycle (this could be
tweaked with PWM polarity, but not all PWMs support inverted polarity).
Add the pwm-dutycycle-range and pwm-dutycycle-unit DT properties to define
such constraints. If those properties are not defined, the PWM regulator
use the default pwm-dutycycle-range = <0 100> and
pwm-dutycycle-unit = <100> values (existing behavior).
Signed-off-by: Boris Brezillon <boris.brezillon@...e-electrons.com>
Reviewed-by: Brian Norris <briannorris@...omium.org>
Tested-by: Brian Norris <briannorris@...omium.org>
---
drivers/regulator/pwm-regulator.c | 92 +++++++++++++++++++++++++++++++++++----
1 file changed, 83 insertions(+), 9 deletions(-)
diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index c39ecd1..3e8680a 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c
@@ -21,6 +21,12 @@
#include <linux/of_device.h>
#include <linux/pwm.h>
+struct pwm_continuous_reg_data {
+ unsigned int min_uV_dutycycle;
+ unsigned int max_uV_dutycycle;
+ unsigned int dutycycle_unit;
+};
+
struct pwm_regulator_data {
/* Shared */
struct pwm_device *pwm;
@@ -28,6 +34,9 @@ struct pwm_regulator_data {
/* Voltage table */
struct pwm_voltages *duty_cycle_table;
+ /* Continuous mode info */
+ struct pwm_continuous_reg_data continuous;
+
/* regulator descriptor */
struct regulator_desc desc;
@@ -132,31 +141,79 @@ static int pwm_regulator_is_enabled(struct regulator_dev *dev)
static int pwm_regulator_get_voltage(struct regulator_dev *rdev)
{
struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
+ unsigned int min_uV_duty = drvdata->continuous.min_uV_dutycycle;
+ unsigned int max_uV_duty = drvdata->continuous.max_uV_dutycycle;
+ unsigned int duty_unit = drvdata->continuous.dutycycle_unit;
int min_uV = rdev->constraints->min_uV;
- int diff = rdev->constraints->max_uV - min_uV;
+ int max_uV = rdev->constraints->max_uV;
+ int diff_uV = max_uV - min_uV;
struct pwm_state pstate;
+ unsigned int diff_duty;
+ unsigned int voltage;
pwm_get_state(drvdata->pwm, &pstate);
- return min_uV + pwm_get_relative_duty_cycle(&pstate, diff);
+ voltage = pwm_get_relative_duty_cycle(&pstate, duty_unit);
+
+ /*
+ * The dutycycle for the min_uV voltage might be greater than the
+ * one for the max_uV. This is happening when the user needs an
+ * inversed polarity, but the PWM device does not support inversing
+ * it in hardware.
+ */
+ if (max_uV_duty < min_uV_duty) {
+ voltage = min_uV_duty - voltage;
+ diff_duty = min_uV_duty - max_uV_duty;
+ } else {
+ voltage = voltage - min_uV_duty;
+ diff_duty = max_uV_duty - min_uV_duty;
+ }
+
+ voltage = DIV_ROUND_CLOSEST_ULL((u64)voltage * diff_uV, diff_duty);
+
+ return voltage + min_uV;
}
static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
- int min_uV, int max_uV,
- unsigned *selector)
+ int req_min_uV, int req_max_uV,
+ unsigned int *selector)
{
struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
+ unsigned int min_uV_duty = drvdata->continuous.min_uV_dutycycle;
+ unsigned int max_uV_duty = drvdata->continuous.max_uV_dutycycle;
+ unsigned int duty_unit = drvdata->continuous.dutycycle_unit;
unsigned int ramp_delay = rdev->constraints->ramp_delay;
- unsigned int req_diff = min_uV - rdev->constraints->min_uV;
+ int min_uV = rdev->constraints->min_uV;
+ int max_uV = rdev->constraints->max_uV;
+ int diff_uV = max_uV - min_uV;
struct pwm_state pstate;
- unsigned int diff;
+ unsigned int diff_duty;
+ unsigned int dutycycle;
int ret;
pwm_prepare_new_state(drvdata->pwm, &pstate);
- diff = rdev->constraints->max_uV - rdev->constraints->min_uV;
- /* We pass diff as the scale to get a uV precision. */
- pwm_set_relative_duty_cycle(&pstate, req_diff, diff);
+ /*
+ * The dutycycle for the min_uV voltage might be greater than the
+ * one for the max_uV. This is happening when the user needs an
+ * inversed polarity, but the PWM device does not support inversing
+ * it in hardware.
+ */
+ if (max_uV_duty < min_uV_duty)
+ diff_duty = min_uV_duty - max_uV_duty;
+ else
+ diff_duty = max_uV_duty - min_uV_duty;
+
+ dutycycle = DIV_ROUND_CLOSEST_ULL((u64)(req_min_uV - min_uV) *
+ diff_duty,
+ diff_uV);
+
+ if (max_uV_duty < min_uV_duty)
+ dutycycle = min_uV_duty - dutycycle;
+ else
+ dutycycle = min_uV_duty + dutycycle;
+
+ pwm_set_relative_duty_cycle(&pstate, dutycycle, duty_unit);
ret = pwm_apply_state(drvdata->pwm, &pstate);
if (ret) {
@@ -237,11 +294,28 @@ static int pwm_regulator_init_table(struct platform_device *pdev,
static int pwm_regulator_init_continuous(struct platform_device *pdev,
struct pwm_regulator_data *drvdata)
{
+ u32 dutycycle_range[2] = { 0, 100 };
+ u32 dutycycle_unit = 100;
+
memcpy(&drvdata->ops, &pwm_regulator_voltage_continuous_ops,
sizeof(drvdata->ops));
drvdata->desc.ops = &drvdata->ops;
drvdata->desc.continuous_voltage_range = true;
+ of_property_read_u32_array(pdev->dev.of_node,
+ "pwm-dutycycle-range",
+ dutycycle_range, 2);
+ of_property_read_u32(pdev->dev.of_node, "pwm-dutycycle-unit",
+ &dutycycle_unit);
+
+ if (dutycycle_range[0] > dutycycle_unit ||
+ dutycycle_range[1] > dutycycle_unit)
+ return -EINVAL;
+
+ drvdata->continuous.dutycycle_unit = dutycycle_unit;
+ drvdata->continuous.min_uV_dutycycle = dutycycle_range[0];
+ drvdata->continuous.max_uV_dutycycle = dutycycle_range[1];
+
return 0;
}
--
2.7.4
Powered by blists - more mailing lists