linux-kernel - Re: lm-senser can't detect thermal on thermal

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <87oa7bkqvl.wl%kuninori.morimoto.gx@renesas.com>
Date:	Thu, 9 Jun 2016 03:07:38 +0000
From:	Kuninori Morimoto <kuninori.morimoto.gx@...esas.com>
To:	"Zhang, Rui" <rui.zhang@...el.com>
CC:	"edubezval@...il.com" <edubezval@...il.com>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"linux-renesas-soc@...r.kernel.org" 
	<linux-renesas-soc@...r.kernel.org>,
	"linux-pm@...r.kernel.org" <linux-pm@...r.kernel.org>,
	"yoshihiro.shimoda.uh@...esas.com" <yoshihiro.shimoda.uh@...esas.com>,
	"cm-hiep@...so.co.jp" <cm-hiep@...so.co.jp>
Subject: Re: lm-senser can't detect thermal on thermal_zone


Hi Zhang

Can you check this email ?

> > Thank you for your help
> > 
> > > > 	non thermal-zon
> > > > 	  sensor command: OK
> > > > 	  read from /sys/class/thermal/thermal_zone0 : OK
> > > > 
> > > > 	thermal-zon
> > > > 	  sensor command: NG
> > > > 	  read from /sys/class/thermal/thermal_zone0 : OK
> > > 
> > > config THERMAL_HWMON
> > >         bool
> > >         prompt "Expose thermal sensors as hwmon device"
> > >         depends on HWMON=y || HWMON=THERMAL
> > >         default y
> > > 
> > > please check if the thermal subsystem is built in, while hwmon subsystem
> > > is built as module.
> > > you should either set CONFIG_HWMON=y, or set both CONFIG_HWMON and
> > > CONFIG_THERMAL as module.
> > 
> > Thanks. but it seems our system has it.
> > 
> > I noticed that thermal_zone case uses of_parse_thermal_zones()
> > and it has this.
> > 
> > 		/* No hwmon because there might be hwmon drivers registering */
> > 		tzp->no_hwmon = true;
> > 
> > and on thermal_zone_device_register() check this for hwmon
> > 
> > struct thermal_zone_device *thermal_zone_device_register(xxxx)
> > {
> > 	...
> > 	if (!tz->tzp || !tz->tzp->no_hwmon) {
> > 		result = thermal_add_hwmon_sysfs(tz);
> > 		...
> > 	}
> > 	...
> > }
> > 
> > Does this mean "thermal_zone doesn't use lm-senser" ?
> 
> 
> Best regards
> ---
> Kuninori Morimoto