lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1465548878-30085-1-git-send-email-rogerq@ti.com>
Date:	Fri, 10 Jun 2016 11:54:38 +0300
From:	Roger Quadros <rogerq@...com>
To:	<balbi@...nel.org>, <grygorii.strashko@...com>
CC:	<linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
	Roger Quadros <rogerq@...com>
Subject: [PATCH] usb: dwc3: fix runtime PM in error path

If there is a failure after pm_runtime_enable/get_sync()
we need to call pm_runtime_disable/put_sync().

Otherwise it will lead to an unbalanced pm_runtime_enable() on the
subsequent probe if the earlier probe bailed out due to -EPROBE_DEFER.

Signed-off-by: Roger Quadros <rogerq@...com>
---
 drivers/usb/dwc3/core.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 5bf38f8..222d2c9 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1419,7 +1419,7 @@ static int dwc3_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(dwc->dev, "failed to allocate event buffers\n");
 		ret = -ENOMEM;
-		goto err0;
+		goto err1;
 	}
 
 	if (IS_ENABLED(CONFIG_USB_DWC3_HOST) &&
@@ -1436,12 +1436,12 @@ static int dwc3_probe(struct platform_device *pdev)
 
 	ret = dwc3_alloc_scratch_buffers(dwc);
 	if (ret)
-		goto err1;
+		goto err2;
 
 	ret = dwc3_core_init(dwc);
 	if (ret) {
 		dev_err(dev, "failed to initialize core\n");
-		goto err2;
+		goto err3;
 	}
 
 	/* Check the maximum_speed parameter */
@@ -1473,23 +1473,28 @@ static int dwc3_probe(struct platform_device *pdev)
 
 	ret = dwc3_core_init_mode(dwc);
 	if (ret)
-		goto err3;
+		goto err4;
 
 	dwc3_debugfs_init(dwc);
 	pm_runtime_put(dev);
 
 	return 0;
 
-err3:
+err4:
 	dwc3_event_buffers_cleanup(dwc);
 
-err2:
+err3:
 	dwc3_free_scratch_buffers(dwc);
 
-err1:
+err2:
 	dwc3_free_event_buffers(dwc);
 	dwc3_ulpi_exit(dwc);
 
+err1:
+	pm_runtime_allow(&pdev->dev);
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
 err0:
 	/*
 	 * restore res->start back to its original value so that, in case the
-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ