[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1465550109.11651.147.camel@mhfsdcap03>
Date: Fri, 10 Jun 2016 17:15:09 +0800
From: chunfeng yun <chunfeng.yun@...iatek.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
CC: Felipe Balbi <felipe.balbi@...ux.intel.com>,
Mathias Nyman <mathias.nyman@...el.com>,
Matthias Brugger <matthias.bgg@...il.com>,
"Alan Stern" <stern@...land.harvard.edu>,
Rob Herring <robh+dt@...nel.org>,
"Mark Rutland" <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Sergei Shtylyov <sergei.shtylyov@...entembedded.com>,
Pawel Moll <pawel.moll@....com>,
Kumar Gala <galak@...eaurora.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Alan Cooper <alcooperx@...il.com>, <linux-usb@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>
Subject: Re: Add MediaTek USB3 DRD Driver
Hi,
On Fri, 2016-06-10 at 15:32 +0800, Chunfeng Yun wrote:
> From 8fdc924cecf0ca14da6e8aba360501e53437e548 Mon Sep 17 00:00:00 2001
> From: Chunfeng Yun <chunfeng.yun@...iatek.com>
> Date: Fri, 10 Jun 2016 15:20:20 +0800
> Subject: [PATCH 0/5] Add MediaTek USB3 DRD Driver
>
> These patches introduce the MediaTek USB3 dual-role controller
> driver.
>
> The driver can be configured as Dual-Role Device (DRD),
> Peripheral Only and Host Only (xHCI) modes. It works well
> with Mass Storage, RNDIS and g_zero on FS/HS and SS. And it is
> tested on MT8173 platform which only contains USB2.0 device IP,
> and on MT6290 platform which contains USB3.0 device IP.
>
> Change in v3:
> 1. fix some typo error
> 2. rename mtu3.txt to mt8173-mtu3.txt
>
> Change in v2:
> 1. modify binding docs according to suggestions
> 2. modify some comments and remove some dummy blank lines
> 3. fix memory leakage
>
> Chunfeng Yun (5):
> dt-bindings: mt8173-xhci: support host side of dual-role mode
> dt-bindings: mt8173-mtu3: add devicetree bindings
Could you please help me to review the following two patches based on
v4.7-rc1:
1- usb: xhci-mtk: make IPPC register optional
2- usb: Add MediaTek USB3 DRD Driver
Thank you very much
> usb: xhci-mtk: make IPPC register optional
> usb: Add MediaTek USB3 DRD Driver
> arm64: dts: mediatek: add USB3 DRD driver
>
> .../devicetree/bindings/usb/mt8173-mtu3.txt | 85 ++
> .../devicetree/bindings/usb/mt8173-xhci.txt | 48 ++
> arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 46 +-
> arch/arm64/boot/dts/mediatek/mt8173.dtsi | 28 +-
> drivers/usb/Kconfig | 2 +
> drivers/usb/Makefile | 1 +
> drivers/usb/host/xhci-mtk.c | 32 +-
> drivers/usb/mtu3/Kconfig | 47 ++
> drivers/usb/mtu3/Makefile | 20 +
> drivers/usb/mtu3/mtu3.h | 422 ++++++++++
> drivers/usb/mtu3/mtu3_core.c | 879 ++++++++++++++++++++
> drivers/usb/mtu3/mtu3_dr.c | 348 ++++++++
> drivers/usb/mtu3/mtu3_dr.h | 108 +++
> drivers/usb/mtu3/mtu3_gadget.c | 731 ++++++++++++++++
> drivers/usb/mtu3/mtu3_gadget_ep0.c | 879 ++++++++++++++++++++
> drivers/usb/mtu3/mtu3_host.c | 294 +++++++
> drivers/usb/mtu3/mtu3_hw_regs.h | 474 +++++++++++
> drivers/usb/mtu3/mtu3_plat.c | 490 +++++++++++
> drivers/usb/mtu3/mtu3_qmu.c | 599 +++++++++++++
> drivers/usb/mtu3/mtu3_qmu.h | 43 +
> 20 files changed, 5562 insertions(+), 14 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/usb/mt8173-mtu3.txt
> create mode 100644 drivers/usb/mtu3/Kconfig
> create mode 100644 drivers/usb/mtu3/Makefile
> create mode 100644 drivers/usb/mtu3/mtu3.h
> create mode 100644 drivers/usb/mtu3/mtu3_core.c
> create mode 100644 drivers/usb/mtu3/mtu3_dr.c
> create mode 100644 drivers/usb/mtu3/mtu3_dr.h
> create mode 100644 drivers/usb/mtu3/mtu3_gadget.c
> create mode 100644 drivers/usb/mtu3/mtu3_gadget_ep0.c
> create mode 100644 drivers/usb/mtu3/mtu3_host.c
> create mode 100644 drivers/usb/mtu3/mtu3_hw_regs.h
> create mode 100644 drivers/usb/mtu3/mtu3_plat.c
> create mode 100644 drivers/usb/mtu3/mtu3_qmu.c
> create mode 100644 drivers/usb/mtu3/mtu3_qmu.h
>
> --
> 1.7.9.5
>
>
Powered by blists - more mailing lists