| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 13 Jun 2016 13:54:03 +0000
From: Gabriele Paoloni <gabriele.paoloni@...wei.com>
To: "liudongdong (C)" <liudongdong3@...wei.com>,
"helgaas@...nel.org" <helgaas@...nel.org>,
"arnd@...db.de" <arnd@...db.de>,
"will.deacon@....com" <will.deacon@....com>,
"catalin.marinas@....com" <catalin.marinas@....com>,
"rafael@...nel.org" <rafael@...nel.org>,
"hanjun.guo@...aro.org" <hanjun.guo@...aro.org>,
"Lorenzo.Pieralisi@....com" <Lorenzo.Pieralisi@....com>,
"okaya@...eaurora.org" <okaya@...eaurora.org>,
"jchandra@...adcom.com" <jchandra@...adcom.com>,
"tn@...ihalf.com" <tn@...ihalf.com>
CC: "robert.richter@...iumnetworks.com"
<robert.richter@...iumnetworks.com>,
"mw@...ihalf.com" <mw@...ihalf.com>,
"Liviu.Dudau@....com" <Liviu.Dudau@....com>,
"ddaney@...iumnetworks.com" <ddaney@...iumnetworks.com>,
Wangyijing <wangyijing@...wei.com>,
"Suravee.Suthikulpanit@....com" <Suravee.Suthikulpanit@....com>,
"msalter@...hat.com" <msalter@...hat.com>,
"linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-acpi@...r.kernel.org" <linux-acpi@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linaro-acpi@...ts.linaro.org" <linaro-acpi@...ts.linaro.org>,
"jcm@...hat.com" <jcm@...hat.com>,
"andrea.gallo@...aro.org" <andrea.gallo@...aro.org>,
"dhdang@....com" <dhdang@....com>,
"jeremy.linton@....com" <jeremy.linton@....com>,
"cov@...eaurora.org" <cov@...eaurora.org>,
"Chenxin (Charles)" <charles.chenxin@...wei.com>,
Linuxarm <linuxarm@...wei.com>
Subject: RE: [RFC PATCH V2 1/2] ACPI/PCI: Match PCI config space accessors
against platfrom specific ECAM quirks
Hi Tomasz, Jon
> -----Original Message-----
> From: liudongdong (C)
> Sent: 13 June 2016 14:02
> To: helgaas@...nel.org; arnd@...db.de; will.deacon@....com;
> catalin.marinas@....com; rafael@...nel.org; hanjun.guo@...aro.org;
> Lorenzo.Pieralisi@....com; okaya@...eaurora.org; jchandra@...adcom.com;
> tn@...ihalf.com
> Cc: robert.richter@...iumnetworks.com; mw@...ihalf.com;
> Liviu.Dudau@....com; ddaney@...iumnetworks.com; Wangyijing;
> Suravee.Suthikulpanit@....com; msalter@...hat.com; linux-
> pci@...r.kernel.org; linux-arm-kernel@...ts.infradead.org; linux-
> acpi@...r.kernel.org; linux-kernel@...r.kernel.org; linaro-
> acpi@...ts.linaro.org; jcm@...hat.com; andrea.gallo@...aro.org;
> dhdang@....com; jeremy.linton@....com; liudongdong (C);
> cov@...eaurora.org; Gabriele Paoloni; Chenxin (Charles); Linuxarm
> Subject: [RFC PATCH V2 1/2] ACPI/PCI: Match PCI config space accessors
> against platfrom specific ECAM quirks
>
> From: Tomasz Nowicki <tn@...ihalf.com>
>
> Some platforms may not be fully compliant with generic set of PCI
> config
> accessors. For these cases we implement the way to overwrite accessors
> set. Algorithm traverses available quirk list, matches against
> <oem_id, oem_table_id, domain, bus number> tuple and returns
> corresponding
> PCI config ops. oem_id and oem_table_id come from MCFG table standard
> header.
> All quirks can be defined using DECLARE_ACPI_MCFG_FIXUP() macro and
> kept self contained. Example:
>
> /* Custom PCI config ops */
> static struct pci_generic_ecam_ops foo_pci_ops = {
> .bus_shift = 24,
> .pci_ops = {
> .map_bus = pci_ecam_map_bus,
> .read = foo_ecam_config_read,
> .write = foo_ecam_config_write,
> }
> };
>
> DECLARE_ACPI_MCFG_FIXUP(&foo_pci_ops, <oem_id_str>, <oem_table_id>,
> <domain_nr>, <bus_nr>);
>
> Signed-off-by: Tomasz Nowicki <tn@...ihalf.com>
> Signed-off-by: Dongdong Liu <liudongdong3@...wei.com>
> ---
> drivers/acpi/pci_mcfg.c | 41
> ++++++++++++++++++++++++++++++++++++---
> include/asm-generic/vmlinux.lds.h | 7 +++++++
> include/linux/pci-acpi.h | 20 +++++++++++++++++++
> 3 files changed, 65 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
> index d3c3e85..49612b3 100644
> --- a/drivers/acpi/pci_mcfg.c
> +++ b/drivers/acpi/pci_mcfg.c
> @@ -22,6 +22,10 @@
> #include <linux/kernel.h>
> #include <linux/pci.h>
> #include <linux/pci-acpi.h>
> +#include <linux/pci-ecam.h>
> +
> +/* Root pointer to the mapped MCFG table */
> +static struct acpi_table_mcfg *mcfg_table;
>
> /* Structure to hold entries from the MCFG table */
> struct mcfg_entry {
> @@ -35,6 +39,38 @@ struct mcfg_entry {
> /* List to save mcfg entries */
> static LIST_HEAD(pci_mcfg_list);
>
> +extern struct pci_cfg_fixup __start_acpi_mcfg_fixups[];
> +extern struct pci_cfg_fixup __end_acpi_mcfg_fixups[];
> +
> +struct pci_ecam_ops *pci_mcfg_get_ops(struct acpi_pci_root *root)
> +{
> + int bus_num = root->secondary.start;
> + int domain = root->segment;
> + struct pci_cfg_fixup *f;
> +
> + if (!mcfg_table)
> + return &pci_generic_ecam_ops;
> +
> + /*
> + * Match against platform specific quirks and return
> corresponding
> + * CAM ops.
> + *
> + * First match against PCI topology <domain:bus> then use OEM ID
> and
> + * OEM revision from MCFG table standard header.
> + */
> + for (f = __start_acpi_mcfg_fixups; f < __end_acpi_mcfg_fixups;
> f++) {
> + if ((f->domain == domain || f->domain ==
> PCI_MCFG_DOMAIN_ANY) &&
> + (f->bus_num == bus_num || f->bus_num ==
> PCI_MCFG_BUS_ANY) &&
> + (!strncmp(f->oem_id, mcfg_table->header.oem_id,
> + ACPI_OEM_ID_SIZE)) &&
> + (!strncmp(f->oem_table_id, mcfg_table-
> >header.oem_table_id,
> + ACPI_OEM_TABLE_ID_SIZE)))
As you can see here Liudongdong has replaced oem_revision with
oem_table_id.
Now it seems that there are some platforms that have already shipped
using a matching based on the oem_revision (right Jon?)
However I guess that if in FW they have defined oem_table_id properly
they should be able to use this mechanism without needing to a FW update.
Can these vendors confirm this?
Tomasz do you think this can work for Cavium Thunder?
Thanks
Gab
> + return f->ops;
> + }
> + /* No quirks, use ECAM */
> + return &pci_generic_ecam_ops;
> +}
> +
> phys_addr_t pci_mcfg_lookup(u16 seg, struct resource *bus_res)
> {
> struct mcfg_entry *e;
> @@ -54,7 +90,6 @@ phys_addr_t pci_mcfg_lookup(u16 seg, struct resource
> *bus_res)
>
> static __init int pci_mcfg_parse(struct acpi_table_header *header)
> {
> - struct acpi_table_mcfg *mcfg;
> struct acpi_mcfg_allocation *mptr;
> struct mcfg_entry *e, *arr;
> int i, n;
> @@ -64,8 +99,8 @@ static __init int pci_mcfg_parse(struct
> acpi_table_header *header)
>
> n = (header->length - sizeof(struct acpi_table_mcfg)) /
> sizeof(struct acpi_mcfg_allocation);
> - mcfg = (struct acpi_table_mcfg *)header;
> - mptr = (struct acpi_mcfg_allocation *) &mcfg[1];
> + mcfg_table = (struct acpi_table_mcfg *)header;
> + mptr = (struct acpi_mcfg_allocation *) &mcfg_table[1];
>
> arr = kcalloc(n, sizeof(*arr), GFP_KERNEL);
> if (!arr)
> diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-
> generic/vmlinux.lds.h
> index 6a67ab9..43604fc 100644
> --- a/include/asm-generic/vmlinux.lds.h
> +++ b/include/asm-generic/vmlinux.lds.h
> @@ -300,6 +300,13 @@
> VMLINUX_SYMBOL(__end_pci_fixups_suspend_late) = .; \
> } \
> \
> + /* ACPI MCFG quirks */ \
> + .acpi_fixup : AT(ADDR(.acpi_fixup) - LOAD_OFFSET) { \
> + VMLINUX_SYMBOL(__start_acpi_mcfg_fixups) = .; \
> + *(.acpi_fixup_mcfg) \
> + VMLINUX_SYMBOL(__end_acpi_mcfg_fixups) = .; \
> + } \
> + \
> /* Built-in firmware blobs */ \
> .builtin_fw : AT(ADDR(.builtin_fw) - LOAD_OFFSET) { \
> VMLINUX_SYMBOL(__start_builtin_fw) = .; \
> diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
> index 7d63a66..088a1da 100644
> --- a/include/linux/pci-acpi.h
> +++ b/include/linux/pci-acpi.h
> @@ -25,6 +25,7 @@ static inline acpi_status
> pci_acpi_remove_pm_notifier(struct acpi_device *dev)
> extern phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle);
>
> extern phys_addr_t pci_mcfg_lookup(u16 domain, struct resource
> *bus_res);
> +extern struct pci_ecam_ops *pci_mcfg_get_ops(struct acpi_pci_root
> *root);
>
> static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev
> *pdev)
> {
> @@ -72,6 +73,25 @@ struct acpi_pci_root_ops {
> int (*prepare_resources)(struct acpi_pci_root_info *info);
> };
>
> +struct pci_cfg_fixup {
> + struct pci_ecam_ops *ops;
> + char *oem_id;
> + char *oem_table_id;
> + int domain;
> + int bus_num;
> +};
> +
> +#define PCI_MCFG_DOMAIN_ANY -1
> +#define PCI_MCFG_BUS_ANY -1
> +
> +/* Designate a routine to fix up buggy MCFG */
> +#define DECLARE_ACPI_MCFG_FIXUP(ops, oem_id, oem_table_id, dom, bus)
> \
> + static const struct pci_cfg_fixup \
> + __mcfg_fixup_##oem_id##oem_table_id##dom##bus \
> + __used __attribute__((__section__(".acpi_fixup_mcfg"),
> \
> + aligned((sizeof(void *))))) = \
> + { ops, oem_id, oem_table_id, dom, bus };
> +
> extern int acpi_pci_probe_root_resources(struct acpi_pci_root_info
> *info);
> extern struct pci_bus *acpi_pci_root_create(struct acpi_pci_root *root,
> struct acpi_pci_root_ops *ops,
> --
> 1.9.1
Powered by blists - more mailing lists