| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <575FD253.3070508@huawei.com>
Date: Tue, 14 Jun 2016 17:45:55 +0800
From: Dongdong Liu <liudongdong3@...wei.com>
To: Duc Dang <dhdang@....com>
CC: Christopher Covington <cov@...eaurora.org>,
Bjorn Helgaas <helgaas@...nel.org>,
Arnd Bergmann <arnd@...db.de>,
Will Deacon <will.deacon@....com>,
Catalin Marinas <catalin.marinas@....com>,
"Rafael Wysocki" <rafael@...nel.org>,
Hanjun Guo <hanjun.guo@...aro.org>,
"Lorenzo Pieralisi" <Lorenzo.Pieralisi@....com>,
<okaya@...eaurora.org>, Jayachandran C <jchandra@...adcom.com>,
Tomasz Nowicki <tn@...ihalf.com>,
<robert.richter@...iumnetworks.com>,
Marcin Wojtas <mw@...ihalf.com>,
"Liviu Dudau" <Liviu.Dudau@....com>,
David Daney <ddaney@...iumnetworks.com>,
"Yijing Wang" <wangyijing@...wei.com>,
Suravee Suthikulpanit <Suravee.Suthikulpanit@....com>,
Mark Salter <msalter@...hat.com>, <linux-pci@...r.kernel.org>,
linux-arm <linux-arm-kernel@...ts.infradead.org>,
<linux-acpi@...r.kernel.org>,
"Linux Kernel Mailing List" <linux-kernel@...r.kernel.org>,
<linaro-acpi@...ts.linaro.org>, Jon Masters <jcm@...hat.com>,
Andrea Gallo <andrea.gallo@...aro.org>,
<jeremy.linton@....com>,
Gabriele Paoloni <gabriele.paoloni@...wei.com>,
"Chenxin (Charles)" <charles.chenxin@...wei.com>,
Linuxarm <linuxarm@...wei.com>,
"liudong-1989@....com" <liudong-1989@....com>
Subject: Re: [RFC PATCH V2 1/2] ACPI/PCI: Match PCI config space accessors
against platfrom specific ECAM quirks
Hi Duc
在 2016/6/14 17:00, Duc Dang 写道:
> On Mon, Jun 13, 2016 at 10:51 PM, Dongdong Liu <liudongdong3@...wei.com> wrote:
>> Hi Duc
>>
>> 在 2016/6/14 4:57, Duc Dang 写道:
>>>
>>> On Mon, Jun 13, 2016 at 8:47 AM, Christopher Covington
>>> <cov@...eaurora.org> wrote:
>>>>
>>>> Hi Dongdong,
>>>>
>>>> On 06/13/2016 09:02 AM, Dongdong Liu wrote:
>>>>>
>>>>> diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
>>>>> index d3c3e85..49612b3 100644
>>>>> --- a/drivers/acpi/pci_mcfg.c
>>>>> +++ b/drivers/acpi/pci_mcfg.c
>>>>> @@ -22,6 +22,10 @@
>>>>> #include <linux/kernel.h>
>>>>> #include <linux/pci.h>
>>>>> #include <linux/pci-acpi.h>
>>>>> +#include <linux/pci-ecam.h>
>>>>> +
>>>>> +/* Root pointer to the mapped MCFG table */
>>>>> +static struct acpi_table_mcfg *mcfg_table;
>>>>>
>>>>> /* Structure to hold entries from the MCFG table */
>>>>> struct mcfg_entry {
>>>>> @@ -35,6 +39,38 @@ struct mcfg_entry {
>>>>> /* List to save mcfg entries */
>>>>> static LIST_HEAD(pci_mcfg_list);
>>>>>
>>>>> +extern struct pci_cfg_fixup __start_acpi_mcfg_fixups[];
>>>>> +extern struct pci_cfg_fixup __end_acpi_mcfg_fixups[];
>>>>> +
>>>>> +struct pci_ecam_ops *pci_mcfg_get_ops(struct acpi_pci_root *root)
>>>>> +{
>>>>> + int bus_num = root->secondary.start;
>>>>> + int domain = root->segment;
>>>>> + struct pci_cfg_fixup *f;
>>>>> +
>>>>> + if (!mcfg_table)
>>>>> + return &pci_generic_ecam_ops;
>>>>> +
>>>>> + /*
>>>>> + * Match against platform specific quirks and return corresponding
>>>>> + * CAM ops.
>>>>> + *
>>>>> + * First match against PCI topology <domain:bus> then use OEM ID
>>>>> and
>>>>> + * OEM revision from MCFG table standard header.
>>>>> + */
>>>>> + for (f = __start_acpi_mcfg_fixups; f < __end_acpi_mcfg_fixups;
>>>>> f++) {
>>>>> + if ((f->domain == domain || f->domain ==
>>>>> PCI_MCFG_DOMAIN_ANY) &&
>>>>> + (f->bus_num == bus_num || f->bus_num ==
>>>>> PCI_MCFG_BUS_ANY) &&
>>>>> + (!strncmp(f->oem_id, mcfg_table->header.oem_id,
>>>>> + ACPI_OEM_ID_SIZE)) &&
>>>>> + (!strncmp(f->oem_table_id,
>>>>> mcfg_table->header.oem_table_id,
>>>>> + ACPI_OEM_TABLE_ID_SIZE)))
>>>>
>>>>
>>>> This would just be a small convenience, but if the character count used
>>>> here were
>>>>
>>>> min(strlen(f->oem_id), ACPI_OEM_ID_SIZE)
>>>>
>>>> then the parameters to DECLARE_ACPI_MCFG_FIXUP macro could be substrings
>>>> and
>>>> wouldn't need to be padded out to the full length.
>>>>
>>>>> + return f->ops;
>>>>> + }
>>>>> + /* No quirks, use ECAM */
>>>>> + return &pci_generic_ecam_ops;
>>>>> +}
>>>>
>>>>
>>>>> diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
>>>>> index 7d63a66..088a1da 100644
>>>>> --- a/include/linux/pci-acpi.h
>>>>> +++ b/include/linux/pci-acpi.h
>>>>> @@ -25,6 +25,7 @@ static inline acpi_status
>>>>> pci_acpi_remove_pm_notifier(struct acpi_device *dev)
>>>>> extern phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle);
>>>>>
>>>>> extern phys_addr_t pci_mcfg_lookup(u16 domain, struct resource
>>>>> *bus_res);
>>>>> +extern struct pci_ecam_ops *pci_mcfg_get_ops(struct acpi_pci_root
>>>>> *root);
>>>>>
>>>>> static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev
>>>>> *pdev)
>>>>> {
>>>>> @@ -72,6 +73,25 @@ struct acpi_pci_root_ops {
>>>>> int (*prepare_resources)(struct acpi_pci_root_info *info);
>>>>> };
>>>>>
>>>>> +struct pci_cfg_fixup {
>>>>> + struct pci_ecam_ops *ops;
>>>>> + char *oem_id;
>>>>> + char *oem_table_id;
>>>>> + int domain;
>>>>> + int bus_num;
>>>>> +};
>>>>> +
>>>>> +#define PCI_MCFG_DOMAIN_ANY -1
>>>>> +#define PCI_MCFG_BUS_ANY -1
>>>>> +
>>>>> +/* Designate a routine to fix up buggy MCFG */
>>>>> +#define DECLARE_ACPI_MCFG_FIXUP(ops, oem_id, oem_table_id, dom, bus) \
>>>>> + static const struct pci_cfg_fixup \
>>>>> + __mcfg_fixup_##oem_id##oem_table_id##dom##bus \
>>>>
>>>>
>>>> I'm not entirely sure that this is the right fix--I'm pretty blindly
>>>> following a GCC documentation suggestion [1]--but removing the first two
>>>> preprocessor concatenation operators "##" solved the following build
>>>> error
>>>> for me.
>>>>
>>>> include/linux/pci-acpi.h:90:2: error: pasting "__mcfg_fixup_" and
>>>> ""QCOM"" does not give a valid preprocessing token
>>>> __mcfg_fixup_##oem_id##oem_table_id##dom##bus \
>>>
>>>
>>> I think the problem is gcc is not happy with quoted string when
>>> processing these tokens
>>> (""QCOM"", the extra "" are added by gcc). So should we not concat
>>> string tokens and
>>> use the fixup definition in v1 of this RFC:
>>> /* Designate a routine to fix up buggy MCFG */
>>> #define DECLARE_ACPI_MCFG_FIXUP(ops, oem_id, rev, dom, bus) \
>>> static const struct pci_cfg_fixup
>>> __mcfg_fixup_##system##dom##bus\
>>> __used __attribute__((__section__(".acpi_fixup_mcfg"), \
>>> aligned((sizeof(void *))))) = \
>>> { ops, oem_id, rev, dom, bus };
>>
>>
>> V1 fixup exist the redefinition error when compiling mutiple
>> DECLARE_ACPI_MCFG_FIXUP
>> with the same PCI_MCFG_DOMAIN_ANY and PCI_MCFG_BUS_ANY.
>>
>> #define EFI_ACPI_HISI_OEM_ID "HISI"
>> #define EFI_ACPI_HISI_D02_OEM_TABLE_ID "HISI-D02"
>> #define EFI_ACPI_HISI_D03_OEM_TABLE_ID "HISI-D03"
>>
>> DECLARE_ACPI_MCFG_FIXUP(&hisi_pcie_ecam_ops, EFI_ACPI_HISI_OEM_ID,
>> EFI_ACPI_HISI_D02_OEM_TABLE_ID, PCI_MCFG_DOMAIN_ANY,
>> PCI_MCFG_BUS_ANY);
>>
>> DECLARE_ACPI_MCFG_FIXUP(&hisi_pcie_ecam_ops, EFI_ACPI_HISI_OEM_ID,
>> EFI_ACPI_HISI_D03_OEM_TABLE_ID, PCI_MCFG_DOMAIN_ANY,
>> PCI_MCFG_BUS_ANY);
>>
>> In file included from drivers/pci/host/pcie-hisi-acpi.c:15:0:
>> include/linux/pci-acpi.h:98:43: error: redefinition of
>> '__mcfg_fixup_systemPCI_MCFG_DOMAIN_ANYPCI_MCFG_BUS_ANY'
>> static const struct pci_cfg_fixup __mcfg_fixup_##system##dom##bus\
>> ^
>> drivers/pci/host/pcie-hisi-acpi.c:215:1: note: in expansion of macro
>> 'DECLARE_ACPI_MCFG_FIXUP'
>> DECLARE_ACPI_MCFG_FIXUP(&hisi_pcie_ecam_ops, EFI_ACPI_HISI_OEM_ID,
>> ^
>> include/linux/pci-acpi.h:98:43: note: previous definition of
>> '__mcfg_fixup_systemPCI_MCFG_DOMAIN_ANYPCI_MCFG_BUS_ANY' was here
>> static const struct pci_cfg_fixup __mcfg_fixup_##system##dom##bus\
>> ^
>> drivers/pci/host/pcie-hisi-acpi.c:212:1: note: in expansion of macro
>> 'DECLARE_ACPI_MCFG_FIXUP'
>>
>>
>> V2 fixup can resolve the redefinition error, but need to use macro.
>> We can see that the name of macro is not replace with it's value in
>> "__mcfg_fixup_EFI_ACPI_HISI_OEM_IDEFI_ACPI_HISI_D03_OEM_TABLE_IDPCI_MCFG_DOMAIN_ANYPCI_MCFG_BUS_ANY".
>>
>> Any good idea is appreciated.
> Hmmm.
>
> I was testing # op and using min_t to get the min-len when doing
> strncmp similar to Chris' suggestion (using min_t avoids type
> warnings)
>
> /* Designate a routine to fix up buggy MCFG */
> #define DECLARE_ACPI_MCFG_FIXUP(ops, oem_id, oem_table_id, rev, dom, bus) \
> static const struct pci_cfg_fixup
> __mcfg_fixup##oem_id##oem_table_id##rev##dom##bus\
> __used __attribute__((__section__(".acpi_fixup_mcfg"), \
> aligned((sizeof(void *))))) = \
> { ops, #oem_id, #oem_table_id, rev, dom, bus };
This should change to { ops, oem_id, oem_table_id, rev, dom, bus };
‘#’ is not need.
>
> My fixup definition:
> DECLARE_ACPI_MCFG_FIXUP(&xgene_pcie_ecam_ops, APM, XGENE, 2,
> PCI_MCFG_DOMAIN_ANY,
> PCI_MCFG_BUS_ANY);
> My match condition is:
> if ((f->domain == domain || f->domain == PCI_MCFG_DOMAIN_ANY) &&
> (f->bus_num == bus_num || f->bus_num == PCI_MCFG_BUS_ANY) &&
> (!strncmp(f->oem_id, mcfg->header.oem_id,
> min_t(size_t, strlen(f->oem_id),
> ACPI_OEM_ID_SIZE))) &&
> (!strncmp(f->oem_table_id, mcfg->header.oem_table_id,
> min_t(size_t, strlen(f->oem_table_id),
> ACPI_OEM_TABLE_ID_SIZE))) &&
> (f->oem_revision == mcfg->header.oem_revision)) {
> return f->ops;
> }
>
> But this still does not work for your case as having HISI-D02 as
> oem_table_id will cause error.
In my case, I have tested and it worked ok.
Could you show the detail error information that you met?
Thanks
Dongdong
>
>>
>> Thanks
>> Dongdong
>>
>>>
>>> Regards,
>>> Duc Dang.
>>>
>>>
>>>> ^
>>>> arch/arm64/kernel/pci.c:225:1: note: in expansion of macro
>>>> ‘DECLARE_ACPI_MCFG_FIXUP’
>>>> DECLARE_ACPI_MCFG_FIXUP(&pci_32b_ecam_ops, "QCOM", "QDF2432",
>>>> PCI_MCFG_DOMAIN_ANY, PCI_MCFG_BUS_ANY);
>>>> ^
>>>> arch/arm64/kernel/pci.c:225:44: error: pasting ""QCOM"" and ""QDF2432""
>>>> does not give a valid preprocessing token
>>>> DECLARE_ACPI_MCFG_FIXUP(&pci_32b_ecam_ops, "QCOM", "QDF2432",
>>>> PCI_MCFG_DOMAIN_ANY, PCI_MCFG_BUS_ANY);
>>>> ^
>>>> include/linux/pci-acpi.h:90:17: note: in definition of macro
>>>> ‘DECLARE_ACPI_MCFG_FIXUP’
>>>> __mcfg_fixup_##oem_id##oem_table_id##dom##bus \
>>>> ^
>>>> arch/arm64/kernel/pci.c:225:52: error: pasting ""QDF2432"" and
>>>> "PCI_MCFG_DOMAIN_ANY" does not give a valid preprocessi
>>>> ng token
>>>> DECLARE_ACPI_MCFG_FIXUP(&pci_32b_ecam_ops, "QCOM", "QDF2432",
>>>> PCI_MCFG_DOMAIN_ANY, PCI_MCFG_BUS_ANY);
>>>> ^
>>>> include/linux/pci-acpi.h:90:25: note: in definition of macro
>>>> ‘DECLARE_ACPI_MCFG_FIXUP’
>>>> __mcfg_fixup_##oem_id##oem_table_id##dom##bus \
>>>> ^
>>>> arch/arm64/kernel/pci.c:225:44: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or
>>>> ‘__attribute__’ before string constant
>>>> DECLARE_ACPI_MCFG_FIXUP(&pci_32b_ecam_ops, "QCOM", "QDF2432",
>>>> PCI_MCFG_DOMAIN_ANY, PCI_MCFG_BUS_ANY);
>>>> ^
>>>> include/linux/pci-acpi.h:90:17: note: in definition of macro
>>>> ‘DECLARE_ACPI_MCFG_FIXUP’
>>>> __mcfg_fixup_##oem_id##oem_table_id##dom##bus \
>>>> ^
>>>> make[1]: *** [arch/arm64/kernel/pci.o] Error 1
>>>> make: *** [arch/arm64/kernel] Error 2
>>>>
>>>> 1. https://gcc.gnu.org/onlinedocs/cpp/Concatenation.html#Concatenation
>>>>
>>>>> + __used __attribute__((__section__(".acpi_fixup_mcfg"), \
>>>>> + aligned((sizeof(void *))))) = \
>>>>> + { ops, oem_id, oem_table_id, dom, bus };
>>>>> +
>>>>> extern int acpi_pci_probe_root_resources(struct acpi_pci_root_info
>>>>> *info);
>>>>> extern struct pci_bus *acpi_pci_root_create(struct acpi_pci_root
>>>>> *root,
>>>>> struct acpi_pci_root_ops
>>>>> *ops,
>>>>>
>>>>
>>>> Thanks,
>>>> Cov
>>>>
>>>> --
>>>> Qualcomm Innovation Center, Inc.
>>>> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
>>>> a Linux Foundation Collaborative Project
>>>
>>>
>>> .
>>>
>>
> Regards
> Duc Dang.
>
> .
>
Powered by blists - more mailing lists