| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1140122548.58727.3de61248-4cae-4f94-b8a2-ef63c5c3ec1b.open-xchange@email.1und1.de>
Date: Wed, 15 Jun 2016 23:17:34 +0200 (CEST)
From: Stefan Wahren <stefan.wahren@...e.com>
To: Ksenija Stanojevic <ksenija.stanojevic@...il.com>,
linux-kernel@...r.kernel.org
Cc: lee.jones@...aro.org, linux-input@...r.kernel.org,
pmeerw@...erw.net, jic23@...nel.org, knaack.h@....de,
lars@...afoo.de, dmitry.torokhov@...il.com, harald@...ib.org,
fabio.estevam@...escale.com, linux-iio@...r.kernel.org,
marex@...x.de
Subject: Re: [PATCH v2 1/4] mfd: mxs-lradc: Add support for mxs-lradc MFD
Hi Ksenija,
sorry for the late review, but i was busy.
> Ksenija Stanojevic <ksenija.stanojevic@...il.com> hat am 8. Juni 2016 um 16:45
> geschrieben:
>
>
> Add core files for mxs-lradc MFD driver.
I think it's worth to mention that this patch won't compile in iio/testing
without this patch:
a8f447be8056 ("mfd: Add resource managed APIs for mfd_add_devices")
>
> Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@...il.com>
> ---
> Changes in v2:
> - do not change spacing in Kconfig
> - make struct mfd_cell part of struct mxs_lradc
> - use switch instead of if in mxs_lradc_irq_mask
> - use only necessary header files in mxs_lradc.h
> - use devm_mfd_add_device
> - use separate function to register mfd device
> - change licence to GPL
> - add copyright
>
> drivers/mfd/Kconfig | 17 ++++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/mxs-lradc.c | 215
> ++++++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/mxs-lradc.h | 204 +++++++++++++++++++++++++++++++++++++++
> 4 files changed, 437 insertions(+)
> create mode 100644 drivers/mfd/mxs-lradc.c
> create mode 100644 include/linux/mfd/mxs-lradc.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 9ca66de..62593ad 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -271,6 +271,23 @@ config MFD_MC13XXX_I2C
> help
> Select this if your MC13xxx is connected via an I2C bus.
>
> +config MFD_MXS_LRADC
> + tristate "Freescale i.MX23/i.MX28 LRADC"
> + depends on ARCH_MXS || COMPILE_TEST
> + select MFD_CORE
> + select STMP_DEVICE
> + help
> + Say yes here to build support for the low-resolution
> + analog-to-digital converter (LRADC) found on the i.MX23 and i.MX28
> + processors. This driver provides common support for accessing the
> + device, additional drivers must be enabled in order to use the
> + functionality of the device:
> + mxs-lradc-adc for ADC readings
> + mxs-lradc-ts for touchscreen support
> +
> + This driver can also be built as a module. If so, the module will be
> + called mxs-lradc.
> +
> config MFD_HI6421_PMIC
> tristate "HiSilicon Hi6421 PMU/Codec IC"
> depends on OF
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 0f230a6..ecf6399 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -198,3 +198,4 @@ intel-soc-pmic-objs := intel_soc_pmic_core.o
> intel_soc_pmic_crc.o
> intel-soc-pmic-$(CONFIG_INTEL_PMC_IPC) += intel_soc_pmic_bxtwc.o
> obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
> obj-$(CONFIG_MFD_MT6397) += mt6397-core.o
> +obj-$(CONFIG_MFD_MXS_LRADC) += mxs-lradc.o
> diff --git a/drivers/mfd/mxs-lradc.c b/drivers/mfd/mxs-lradc.c
> new file mode 100644
> index 0000000..5e894bb
> --- /dev/null
> +++ b/drivers/mfd/mxs-lradc.c
> @@ -0,0 +1,215 @@
> +/*
> + * Freescale MXS LRADC driver
> + *
> + * Copyright (c) 2012 DENX Software Engineering, GmbH.
> + * Marek Vasut <marex@...x.de>
> + * Ksenija Stanojevic <ksenija.stanojevic@...il.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/device.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/mxs-lradc.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +
> +static const char * const mx23_lradc_irq_names[] = {
> + "mxs-lradc-touchscreen",
> + "mxs-lradc-channel0",
> + "mxs-lradc-channel1",
> + "mxs-lradc-channel2",
> + "mxs-lradc-channel3",
> + "mxs-lradc-channel4",
> + "mxs-lradc-channel5",
> + "mxs-lradc-channel6",
> + "mxs-lradc-channel7",
> +};
> +
> +static const char * const mx28_lradc_irq_names[] = {
> + "mxs-lradc-touchscreen",
> + "mxs-lradc-thresh0",
> + "mxs-lradc-thresh1",
> + "mxs-lradc-channel0",
> + "mxs-lradc-channel1",
> + "mxs-lradc-channel2",
> + "mxs-lradc-channel3",
> + "mxs-lradc-channel4",
> + "mxs-lradc-channel5",
> + "mxs-lradc-channel6",
> + "mxs-lradc-channel7",
> + "mxs-lradc-button0",
> + "mxs-lradc-button1",
> +};
> +
> +struct mxs_lradc_of_config {
> + const int irq_count;
> + const char * const *irq_name;
> +};
> +
> +static const struct mxs_lradc_of_config mxs_lradc_of_config[] = {
> + [IMX23_LRADC] = {
> + .irq_count = ARRAY_SIZE(mx23_lradc_irq_names),
> + .irq_name = mx23_lradc_irq_names,
> + },
> + [IMX28_LRADC] = {
> + .irq_count = ARRAY_SIZE(mx28_lradc_irq_names),
> + .irq_name = mx28_lradc_irq_names,
> + },
> +};
> +
> +static const struct of_device_id mxs_lradc_dt_ids[] = {
> + { .compatible = "fsl,imx23-lradc", .data = (void *)IMX23_LRADC, },
> + { .compatible = "fsl,imx28-lradc", .data = (void *)IMX28_LRADC, },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, mxs_lradc_dt_ids);
> +
> +static int mxs_lradc_add_device(struct platform_device *pdev,
> + struct mxs_lradc *lradc, char *name, int i)
> +{
> + struct mfd_cell *cell;
> +
> + cell = &lradc->cells[i];
> + cell->name = name;
> + cell->platform_data = lradc;
> + cell->pdata_size = sizeof(*lradc);
> +
> + return devm_mfd_add_devices(&pdev->dev, -1, cell, 1, NULL, 0, NULL);
> +}
> +
> +static int mxs_lradc_probe(struct platform_device *pdev)
> +{
> + const struct of_device_id *of_id =
> + of_match_device(mxs_lradc_dt_ids, &pdev->dev);
> + const struct mxs_lradc_of_config *of_cfg =
> + &mxs_lradc_of_config[(enum mxs_lradc_id)of_id->data];
> + struct device *dev = &pdev->dev;
> + struct device_node *node = dev->of_node;
> + struct mxs_lradc *lradc;
> + struct resource *iores;
> + int ret = 0, touch_ret, i;
> + u32 ts_wires = 0;
> +
> + lradc = devm_kzalloc(&pdev->dev, sizeof(*lradc), GFP_KERNEL);
> + if (!lradc)
> + return -ENOMEM;
> + lradc->soc = (enum mxs_lradc_id)of_id->data;
> +
> + /* Grab the memory area */
> + iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + lradc->base = devm_ioremap_resource(dev, iores);
> + if (IS_ERR(lradc->base))
> + return PTR_ERR(lradc->base);
> +
> + lradc->clk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(lradc->clk)) {
> + dev_err(dev, "Failed to get the delay unit clock\n");
> + return PTR_ERR(lradc->clk);
> + }
> + ret = clk_prepare_enable(lradc->clk);
> + if (ret != 0) {
> + dev_err(dev, "Failed to enable the delay unit clock\n");
> + return ret;
> + }
> +
> + touch_ret = of_property_read_u32(node, "fsl,lradc-touchscreen-wires",
> + &ts_wires);
> +
> + if (touch_ret == 0)
> + lradc->buffer_vchans = BUFFER_VCHANS_LIMITED;
> + else
> + lradc->buffer_vchans = BUFFER_VCHANS_ALL;
> +
> + lradc->irq_count = of_cfg->irq_count;
> + lradc->irq_name = of_cfg->irq_name;
> + for (i = 0; i < lradc->irq_count; i++) {
> + lradc->irq[i] = platform_get_irq(pdev, i);
> + if (lradc->irq[i] < 0) {
> + ret = lradc->irq[i];
> + goto err_clk;
> + }
> + }
> +
> + platform_set_drvdata(pdev, lradc);
> +
> + ret = stmp_reset_block(lradc->base);
> + if (ret)
> + return ret;
> +
> + switch (ts_wires) {
> + case 4:
> + lradc->use_touchscreen = MXS_LRADC_TOUCHSCREEN_4WIRE;
> + break;
> + case 5:
> + if (lradc->soc == IMX28_LRADC) {
> + lradc->use_touchscreen = MXS_LRADC_TOUCHSCREEN_5WIRE;
> + break;
> + }
> + /* fall through an error message for i.MX23 */
> + default:
> + dev_err(&pdev->dev,
> + "Unsupported number of touchscreen wires (%d)\n",
> + ts_wires);
> + return -EINVAL;
> + }
The complete switch statement should be in the if (touch_ret == 0) branch:
* so we don't reset the block in case of invalid devicetree settings
* handle the optional property fsl,lradc-touchscreen-wires correctly
> +
> + ret = mxs_lradc_add_device(pdev, lradc, DRIVER_NAME_ADC, 0);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to add the ADC subdevice\n");
> + goto err_clk;
> + }
> +
> + if (!lradc->use_touchscreen)
> + return 0;
> +
> + ret = mxs_lradc_add_device(pdev, lradc, DRIVER_NAME_TS, 1);
> + if (ret) {
> + dev_err(&pdev->dev,
> + "Failed to add the touchscreen subdevice\n");
> + goto err_clk;
> + }
> +
> + return 0;
> +
> +err_clk:
> + clk_disable_unprepare(lradc->clk);
> +
> + return ret;
> +}
> +
> +static int mxs_lradc_remove(struct platform_device *pdev)
> +{
> + struct mxs_lradc *lradc = platform_get_drvdata(pdev);
> +
> + clk_disable_unprepare(lradc->clk);
> +
> + return 0;
> +}
> +
> +static struct platform_driver mxs_lradc_driver = {
> + .driver = {
> + .name = "mxs-lradc",
> + .of_match_table = mxs_lradc_dt_ids,
> + },
> + .probe = mxs_lradc_probe,
> + .remove = mxs_lradc_remove,
> +};
> +
> +module_platform_driver(mxs_lradc_driver);
> +
> +MODULE_DESCRIPTION("Freescale i.MX23/i.MX28 LRADC driver");
> +MODULE_LICENSE("GPL");
MODULE_AUTHOR ?
> +MODULE_ALIAS("platform:mxs-lradc");
Powered by blists - more mailing lists