| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1466414822-18948-12-git-send-email-boris.brezillon@free-electrons.com>
Date: Mon, 20 Jun 2016 11:26:57 +0200
From: Boris Brezillon <boris.brezillon@...e-electrons.com>
To: David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
linux-mtd@...ts.infradead.org,
Boris Brezillon <boris.brezillon@...e-electrons.com>,
Richard Weinberger <richard@....at>
Cc: linux-kernel@...r.kernel.org, Hans de Goede <hdegoede@...hat.com>,
Aleksei Mamlin <mamlinav@...il.com>, valdis.kletnieks@...edu
Subject: [PATCH v3 11/16] mtd: nand: move Micron specific init logic in nand_micron.c
Move Micron specific initialization logic into nand_micron.c. This is
part of the "separate vendor specific code from core" cleanup process.
Signed-off-by: Boris Brezillon <boris.brezillon@...e-electrons.com>
---
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/nand_base.c | 31 +---------------
drivers/mtd/nand/nand_ids.c | 3 +-
drivers/mtd/nand/nand_micron.c | 84 ++++++++++++++++++++++++++++++++++++++++++
include/linux/mtd/nand.h | 20 ----------
5 files changed, 88 insertions(+), 51 deletions(-)
create mode 100644 drivers/mtd/nand/nand_micron.c
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 403e9a7de22e..f1bd008564b2 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -59,5 +59,6 @@ obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o
nand-objs := nand_base.o nand_bbt.o nand_timings.o nand_ids.o
nand-objs += nand_hynix.o
+nand-objs += nand_micron.o
nand-objs += nand_samsung.o
nand-objs += nand_toshiba.o
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 7face1bf51f3..456812946acc 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3304,30 +3304,6 @@ ext_out:
return ret;
}
-static int nand_setup_read_retry_micron(struct mtd_info *mtd, int retry_mode)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {retry_mode};
-
- return chip->onfi_set_features(mtd, chip, ONFI_FEATURE_ADDR_READ_RETRY,
- feature);
-}
-
-/*
- * Configure chip properties from Micron vendor-specific ONFI table
- */
-static void nand_onfi_detect_micron(struct nand_chip *chip,
- struct nand_onfi_params *p)
-{
- struct nand_onfi_vendor_micron *micron = (void *)p->vendor;
-
- if (le16_to_cpu(p->vendor_revision) < 1)
- return;
-
- chip->read_retries = micron->read_retry_options;
- chip->setup_read_retry = nand_setup_read_retry_micron;
-}
-
/*
* Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise.
*/
@@ -3424,9 +3400,6 @@ static int nand_flash_detect_onfi(struct nand_chip *chip)
pr_warn("Could not retrieve ONFI ECC requirements\n");
}
- if (p->jedec_id == NAND_MFR_MICRON)
- nand_onfi_detect_micron(chip, p);
-
return 1;
}
@@ -3665,9 +3638,7 @@ static void nand_decode_bbm_options(struct nand_chip *chip)
*/
if ((nand_is_slc(chip) &&
(maf_id == NAND_MFR_AMD ||
- maf_id == NAND_MFR_MACRONIX)) ||
- (mtd->writesize == 2048 &&
- maf_id == NAND_MFR_MICRON))
+ maf_id == NAND_MFR_MACRONIX)))
chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
}
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index 2cc9d325d2eb..5d027879b3b0 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -169,6 +169,7 @@ struct nand_flash_dev nand_flash_ids[] = {
extern const struct nand_manufacturer_ops toshiba_nand_manuf_ops;
extern const struct nand_manufacturer_ops samsung_nand_manuf_ops;
extern const struct nand_manufacturer_ops hynix_nand_manuf_ops;
+extern const struct nand_manufacturer_ops micron_nand_manuf_ops;
struct nand_manufacturers nand_manuf_ids[] = {
{NAND_MFR_TOSHIBA, "Toshiba", &toshiba_nand_manuf_ops},
@@ -178,7 +179,7 @@ struct nand_manufacturers nand_manuf_ids[] = {
{NAND_MFR_RENESAS, "Renesas"},
{NAND_MFR_STMICRO, "ST Micro"},
{NAND_MFR_HYNIX, "Hynix", &hynix_nand_manuf_ops},
- {NAND_MFR_MICRON, "Micron"},
+ {NAND_MFR_MICRON, "Micron", µn_nand_manuf_ops},
{NAND_MFR_AMD, "AMD/Spansion"},
{NAND_MFR_MACRONIX, "Macronix"},
{NAND_MFR_EON, "Eon"},
diff --git a/drivers/mtd/nand/nand_micron.c b/drivers/mtd/nand/nand_micron.c
new file mode 100644
index 000000000000..2303e45164f0
--- /dev/null
+++ b/drivers/mtd/nand/nand_micron.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright (C) 2013 Boris Brezillon <boris.brezillon@...e-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mtd/nand.h>
+
+struct nand_onfi_vendor_micron {
+ u8 two_plane_read;
+ u8 read_cache;
+ u8 read_unique_id;
+ u8 dq_imped;
+ u8 dq_imped_num_settings;
+ u8 dq_imped_feat_addr;
+ u8 rb_pulldown_strength;
+ u8 rb_pulldown_strength_feat_addr;
+ u8 rb_pulldown_strength_num_settings;
+ u8 otp_mode;
+ u8 otp_page_start;
+ u8 otp_data_prot_addr;
+ u8 otp_num_pages;
+ u8 otp_feat_addr;
+ u8 read_retry_options;
+ u8 reserved[72];
+ u8 param_revision;
+} __packed;
+
+
+static int micron_nand_setup_read_retry(struct mtd_info *mtd, int retry_mode)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {retry_mode};
+
+ return chip->onfi_set_features(mtd, chip, ONFI_FEATURE_ADDR_READ_RETRY,
+ feature);
+}
+
+/*
+ * Configure chip properties from Micron vendor-specific ONFI table
+ */
+static int micron_nand_onfi_init(struct nand_chip *chip)
+{
+ struct nand_onfi_params *p = &chip->onfi_params;
+ struct nand_onfi_vendor_micron *micron = (void *)p->vendor;
+
+ if (!chip->onfi_version)
+ return 0;
+
+ if (le16_to_cpu(p->vendor_revision) < 1)
+ return 0;
+
+ chip->read_retries = micron->read_retry_options;
+ chip->setup_read_retry = micron_nand_setup_read_retry;
+
+ return 0;
+}
+
+static int micron_nand_init(struct nand_chip *chip)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ int ret;
+
+ ret = micron_nand_onfi_init(chip);
+ if (ret)
+ return ret;
+
+ if (mtd->writesize == 2048)
+ chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+
+ return 0;
+}
+
+const struct nand_manufacturer_ops micron_nand_manuf_ops = {
+ .init = micron_nand_init,
+};
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index c0a1e3644308..0bdea71409fa 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -348,26 +348,6 @@ struct onfi_ext_param_page {
*/
} __packed;
-struct nand_onfi_vendor_micron {
- u8 two_plane_read;
- u8 read_cache;
- u8 read_unique_id;
- u8 dq_imped;
- u8 dq_imped_num_settings;
- u8 dq_imped_feat_addr;
- u8 rb_pulldown_strength;
- u8 rb_pulldown_strength_feat_addr;
- u8 rb_pulldown_strength_num_settings;
- u8 otp_mode;
- u8 otp_page_start;
- u8 otp_data_prot_addr;
- u8 otp_num_pages;
- u8 otp_feat_addr;
- u8 read_retry_options;
- u8 reserved[72];
- u8 param_revision;
-} __packed;
-
struct jedec_ecc_info {
u8 ecc_bits;
u8 codeword_size;
--
2.7.4
Powered by blists - more mailing lists