| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1466543025-13639-5-git-send-email-cpaul@redhat.com>
Date: Tue, 21 Jun 2016 17:03:44 -0400
From: Lyude <cpaul@...hat.com>
To: intel-gfx@...ts.freedesktop.org,
Ville Syrjälä
<ville.syrjala@...ux.intel.com>,
Daniel Vetter <daniel.vetter@...ll.ch>
Cc: Lyude <cpaul@...hat.com>, stable@...r.kernel.org,
Daniel Vetter <daniel.vetter@...el.com>,
Jani Nikula <jani.nikula@...ux.intel.com>,
David Airlie <airlied@...ux.ie>,
dri-devel@...ts.freedesktop.org (open list:INTEL DRM DRIVERS (excluding
Poulsbo, Moorestow...), linux-kernel@...r.kernel.org (open list))
Subject: [PATCH v6 4/4] drm/i915: Enable polling when we don't have hpd
Unfortunately, there's two situations where we lose hpd right now:
- Runtime suspend
- When we've shut off all of the power wells on Valleyview/Cherryview
While it would be nice if this didn't cause issues, this has the
ability to get us in some awkward states where a user won't be able to
get their display to turn on. For instance; if we boot a Valleyview
system without any monitors connected, it won't need any of it's power
wells and thus shut them off. Since this causes us to lose HPD, this
means that unless the user knows how to ssh into their machine and do a
manual reprobe for monitors, none of the monitors they connect after
booting will actually work.
Eventually we should come up with a better fix then having to enable
polling for this, since this makes rpm a lot less useful, but for now
the infrastructure in i915 just isn't there yet to get hpd in these
situations.
Changes since v1:
- Add comment explaining the addition of the if
(!mode_config->poll_running) in intel_hpd_init()
- Remove unneeded if (!dev->mode_config.poll_enabled) in
i915_hpd_poll_init_work()
- Call to drm_helper_hpd_irq_event() after we disable polling
- Add cancel_work_sync() call to intel_hpd_cancel_work()
Changes since v2:
- Apparently dev->mode_config.poll_running doesn't actually reflect
whether or not a poll is currently in progress, and is actually used
for dynamic module paramter enabling/disabling. So now we instead
keep track of our own poll_running variable in dev_priv->hotplug
- Clean i915_hpd_poll_init_work() a little bit
Changes since v3:
- Remove the now-redundant connector loop in intel_hpd_init(), just
rely on intel_hpd_poll_enable() for setting connector->polled
correctly on each connector
- Get rid of poll_running
- Don't assign enabled in i915_hpd_poll_init_work before we actually
lock dev->mode_config.mutex
- Wrap enabled assignment in i915_hpd_poll_init_work() in READ_ONCE()
for doc purposes
- Do the same for dev_priv->hotplug.poll_enabled with WRITE_ONCE in
intel_hpd_poll_enable()
- Add some comments about racing not mattering in intel_hpd_poll_enable
Changes since v4:
- Rename intel_hpd_poll_enable() to intel_hpd_poll_init()
- Drop the bool argument from intel_hpd_poll_init()
- Remove redundant calls to intel_hpd_poll_init()
- Rename poll_enable_work to poll_init_work
- Add some kerneldoc for intel_hpd_poll_init()
- Cross-reference intel_hpd_poll_init() in intel_hpd_init()
- Just copy the loop from intel_hpd_init() in intel_hpd_poll_init()
Changes since v5:
- Minor kerneldoc nitpicks
Cc: stable@...r.kernel.org
Cc: Ville Syrjälä <ville.syrjala@...ux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@...ll.ch>
Signed-off-by: Lyude <cpaul@...hat.com>
---
drivers/gpu/drm/i915/i915_drv.c | 3 ++
drivers/gpu/drm/i915/i915_drv.h | 3 ++
drivers/gpu/drm/i915/intel_drv.h | 2 +
drivers/gpu/drm/i915/intel_hotplug.c | 90 ++++++++++++++++++++++++++++-----
drivers/gpu/drm/i915/intel_runtime_pm.c | 2 +
5 files changed, 88 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 3eb47fb..86ff8a7 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -1612,6 +1612,9 @@ static int intel_runtime_suspend(struct device *device)
assert_forcewakes_inactive(dev_priv);
+ if (!IS_VALLEYVIEW(dev_priv) || !IS_CHERRYVIEW(dev_priv))
+ intel_hpd_poll_init(dev_priv);
+
DRM_DEBUG_KMS("Device suspended\n");
return 0;
}
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 239a3ec..bbcd625 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -283,6 +283,9 @@ struct i915_hotplug {
u32 short_port_mask;
struct work_struct dig_port_work;
+ struct work_struct poll_init_work;
+ bool poll_enabled;
+
/*
* if we get a HPD irq from DP and a HPD irq from non-DP
* the non-DP HPD could block the workqueue on a mode config
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index dcbfdde..8af0668 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1385,6 +1385,8 @@ int intel_dsi_dcs_init_backlight_funcs(struct intel_connector *intel_connector);
/* intel_dvo.c */
void intel_dvo_init(struct drm_device *dev);
+/* intel_hotplug.c */
+void intel_hpd_poll_init(struct drm_i915_private *dev_priv);
/* legacy fbdev emulation in intel_fbdev.c */
diff --git a/drivers/gpu/drm/i915/intel_hotplug.c b/drivers/gpu/drm/i915/intel_hotplug.c
index ec3285f..816c761 100644
--- a/drivers/gpu/drm/i915/intel_hotplug.c
+++ b/drivers/gpu/drm/i915/intel_hotplug.c
@@ -452,20 +452,47 @@ void intel_hpd_irq_handler(struct drm_i915_private *dev_priv,
*
* This is a separate step from interrupt enabling to simplify the locking rules
* in the driver load and resume code.
+ *
+ * Also see: intel_hpd_poll_init(), which enables connector polling
*/
void intel_hpd_init(struct drm_i915_private *dev_priv)
{
- struct drm_device *dev = dev_priv->dev;
- struct drm_mode_config *mode_config = &dev->mode_config;
- struct drm_connector *connector;
int i;
for_each_hpd_pin(i) {
dev_priv->hotplug.stats[i].count = 0;
dev_priv->hotplug.stats[i].state = HPD_ENABLED;
}
+
+ WRITE_ONCE(dev_priv->hotplug.poll_enabled, false);
+ schedule_work(&dev_priv->hotplug.poll_init_work);
+
+ /*
+ * Interrupt setup is already guaranteed to be single-threaded, this is
+ * just to make the assert_spin_locked checks happy.
+ */
+ spin_lock_irq(&dev_priv->irq_lock);
+ if (dev_priv->display.hpd_irq_setup)
+ dev_priv->display.hpd_irq_setup(dev_priv);
+ spin_unlock_irq(&dev_priv->irq_lock);
+}
+
+void i915_hpd_poll_init_work(struct work_struct *work) {
+ struct drm_i915_private *dev_priv =
+ container_of(work, struct drm_i915_private,
+ hotplug.poll_init_work);
+ struct drm_device *dev = dev_priv->dev;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct drm_connector *connector;
+ bool enabled;
+
+ mutex_lock(&dev->mode_config.mutex);
+
+ enabled = READ_ONCE(dev_priv->hotplug.poll_enabled);
+
list_for_each_entry(connector, &mode_config->connector_list, head) {
- struct intel_connector *intel_connector = to_intel_connector(connector);
+ struct intel_connector *intel_connector =
+ to_intel_connector(connector);
connector->polled = intel_connector->polled;
/* MST has a dynamic intel_connector->encoder and it's reprobing
@@ -474,24 +501,62 @@ void intel_hpd_init(struct drm_i915_private *dev_priv)
continue;
if (!connector->polled && I915_HAS_HOTPLUG(dev) &&
- intel_connector->encoder->hpd_pin > HPD_NONE)
- connector->polled = DRM_CONNECTOR_POLL_HPD;
+ intel_connector->encoder->hpd_pin > HPD_NONE) {
+ connector->polled = enabled ?
+ DRM_CONNECTOR_POLL_CONNECT |
+ DRM_CONNECTOR_POLL_DISCONNECT :
+ DRM_CONNECTOR_POLL_HPD;
+ }
}
+ if (enabled)
+ drm_kms_helper_poll_enable_locked(dev);
+
+ mutex_unlock(&dev->mode_config.mutex);
+
/*
- * Interrupt setup is already guaranteed to be single-threaded, this is
- * just to make the assert_spin_locked checks happy.
+ * We might have missed any hotplugs that happened while we were
+ * in the middle of disabling polling
*/
- spin_lock_irq(&dev_priv->irq_lock);
- if (dev_priv->display.hpd_irq_setup)
- dev_priv->display.hpd_irq_setup(dev_priv);
- spin_unlock_irq(&dev_priv->irq_lock);
+ if (!enabled)
+ drm_helper_hpd_irq_event(dev);
+}
+
+/**
+ * intel_hpd_poll_init - enables/disables polling for connectors with hpd
+ * @dev_priv: i915 device instance
+ * @enabled: Whether to enable or disable polling
+ *
+ * This function enables polling for all connectors, regardless of whether or
+ * not they support hotplug detection. Under certain conditions HPD may not be
+ * functional. On most Intel GPUs, this happens when we enter runtime suspend.
+ * On Valleyview and Cherryview systems, this also happens when we shut off all
+ * of the powerwells.
+ *
+ * Since this function can get called in contexts where we're already holding
+ * dev->mode_config.mutex, we do the actual hotplug enabling in a seperate
+ * worker.
+ *
+ * Also see: intel_hpd_init(), which restores hpd handling.
+ */
+void intel_hpd_poll_init(struct drm_i915_private *dev_priv)
+{
+ WRITE_ONCE(dev_priv->hotplug.poll_enabled, true);
+
+ /*
+ * We might already be holding dev->mode_config.mutex, so do this in a
+ * seperate worker
+ * As well, there's no issue if we race here since we always reschedule
+ * this worker anyway
+ */
+ schedule_work(&dev_priv->hotplug.poll_init_work);
}
void intel_hpd_init_work(struct drm_i915_private *dev_priv)
{
INIT_WORK(&dev_priv->hotplug.hotplug_work, i915_hotplug_work_func);
INIT_WORK(&dev_priv->hotplug.dig_port_work, i915_digport_work_func);
+ INIT_WORK(&dev_priv->hotplug.poll_init_work, i915_hpd_poll_init_work);
INIT_DELAYED_WORK(&dev_priv->hotplug.reenable_work,
intel_hpd_irq_storm_reenable_work);
}
@@ -508,6 +573,7 @@ void intel_hpd_cancel_work(struct drm_i915_private *dev_priv)
cancel_work_sync(&dev_priv->hotplug.dig_port_work);
cancel_work_sync(&dev_priv->hotplug.hotplug_work);
+ cancel_work_sync(&dev_priv->hotplug.poll_init_work);
cancel_delayed_work_sync(&dev_priv->hotplug.reenable_work);
}
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index f88ef76..ada1731 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -1120,6 +1120,8 @@ static void vlv_display_power_well_deinit(struct drm_i915_private *dev_priv)
synchronize_irq(dev_priv->dev->irq);
vlv_power_sequencer_reset(dev_priv);
+
+ intel_hpd_poll_init(dev_priv);
}
static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv,
--
2.5.5
Powered by blists - more mailing lists