| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20160625034511.7966-2-megous@megous.com>
Date: Sat, 25 Jun 2016 05:44:58 +0200
From: megous@...ous.com
To: dev@...ux-sunxi.org
Cc: linux-arm-kernel@...ts.infradead.org,
Josef Gajdusek <atx@....name>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Chen-Yu Tsai <wens@...e.org>,
Emilio López <emilio@...pez.com.ar>,
linux-clk@...r.kernel.org (open list:COMMON CLK FRAMEWORK),
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
DEVICE TREE BINDINGS), linux-kernel@...r.kernel.org (open list)
Subject: [PATCH v2 01/14] ARM: clk: sunxi: Add driver for the H3 THS clock
From: Josef Gajdusek <atx@....name>
This patch adds a driver for the THS clock which is present on the
Allwinner H3.
Signed-off-by: Josef Gajdusek <atx@....name>
---
Documentation/devicetree/bindings/clock/sunxi.txt | 1 +
drivers/clk/sunxi/Makefile | 1 +
drivers/clk/sunxi/clk-h3-ths.c | 98 +++++++++++++++++++++++
3 files changed, 100 insertions(+)
create mode 100644 drivers/clk/sunxi/clk-h3-ths.c
diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
index 8f7619d..5faae05 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -87,6 +87,7 @@ Required properties:
"allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80
"allwinner,sun4i-a10-ve-clk" - for the Video Engine clock
"allwinner,sun6i-a31-display-clk" - for the display clocks
+ "allwinner,sun8i-h3-ths-clk" - for THS on H3
Required properties for all clocks:
- reg : shall be the control register address for the clock.
diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
index 39d2044..8e245e3 100644
--- a/drivers/clk/sunxi/Makefile
+++ b/drivers/clk/sunxi/Makefile
@@ -9,6 +9,7 @@ obj-y += clk-a10-mod1.o
obj-y += clk-a10-pll2.o
obj-y += clk-a10-ve.o
obj-y += clk-a20-gmac.o
+obj-y += clk-h3-ths.o
obj-y += clk-mod0.o
obj-y += clk-simple-gates.o
obj-y += clk-sun4i-display.o
diff --git a/drivers/clk/sunxi/clk-h3-ths.c b/drivers/clk/sunxi/clk-h3-ths.c
new file mode 100644
index 0000000..c1d6d32
--- /dev/null
+++ b/drivers/clk/sunxi/clk-h3-ths.c
@@ -0,0 +1,98 @@
+/*
+ * sun8i THS clock driver
+ *
+ * Copyright (C) 2015 Josef Gajdusek
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#define SUN8I_H3_THS_CLK_ENABLE 31
+#define SUN8I_H3_THS_CLK_DIVIDER_SHIFT 0
+#define SUN8I_H3_THS_CLK_DIVIDER_WIDTH 2
+
+static DEFINE_SPINLOCK(sun8i_h3_ths_clk_lock);
+
+static const struct clk_div_table sun8i_h3_ths_clk_table[] __initconst = {
+ { .val = 0, .div = 1 },
+ { .val = 1, .div = 2 },
+ { .val = 2, .div = 4 },
+ { .val = 3, .div = 6 },
+ { } /* sentinel */
+};
+
+static void __init sun8i_h3_ths_clk_setup(struct device_node *node)
+{
+ struct clk *clk;
+ struct clk_gate *gate;
+ struct clk_divider *div;
+ const char *parent;
+ const char *clk_name = node->name;
+ void __iomem *reg;
+ int err;
+
+ reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+
+ if (IS_ERR(reg))
+ return;
+
+ gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+ if (!gate)
+ goto err_unmap;
+
+ div = kzalloc(sizeof(*gate), GFP_KERNEL);
+ if (!div)
+ goto err_gate_free;
+
+ of_property_read_string(node, "clock-output-names", &clk_name);
+ parent = of_clk_get_parent_name(node, 0);
+
+ gate->reg = reg;
+ gate->bit_idx = SUN8I_H3_THS_CLK_ENABLE;
+ gate->lock = &sun8i_h3_ths_clk_lock;
+
+ div->reg = reg;
+ div->shift = SUN8I_H3_THS_CLK_DIVIDER_SHIFT;
+ div->width = SUN8I_H3_THS_CLK_DIVIDER_WIDTH;
+ div->table = sun8i_h3_ths_clk_table;
+ div->lock = &sun8i_h3_ths_clk_lock;
+
+ clk = clk_register_composite(NULL, clk_name, &parent, 1,
+ NULL, NULL,
+ &div->hw, &clk_divider_ops,
+ &gate->hw, &clk_gate_ops,
+ CLK_SET_RATE_PARENT);
+
+ if (IS_ERR(clk))
+ goto err_div_free;
+
+ err = of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ if (err)
+ goto err_unregister_clk;
+
+ return;
+
+err_unregister_clk:
+ clk_unregister(clk);
+err_gate_free:
+ kfree(gate);
+err_div_free:
+ kfree(div);
+err_unmap:
+ iounmap(reg);
+}
+
+CLK_OF_DECLARE(sun8i_h3_ths_clk, "allwinner,sun8i-h3-ths-clk",
+ sun8i_h3_ths_clk_setup);
--
2.9.0
Powered by blists - more mailing lists