[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAGTfZH2+rpy-WTmSuxAALEUQGpXN7KvwHpThpk-WYh=Ye1vwNg@mail.gmail.com>
Date: Sun, 26 Jun 2016 20:17:53 +0900
From: Chanwoo Choi <cwchoi00@...il.com>
To: Stephen Boyd <stephen.boyd@...aro.org>
Cc: Sebastian Reichel <sre@...nel.org>,
Dmitry Eremin-Solenikov <dbaryshkov@...il.com>,
David Woodhouse <dwmw2@...radead.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
"linux-pm@...r.kernel.org" <linux-pm@...r.kernel.org>,
linux-arm-msm@...r.kernel.org,
Bjorn Andersson <bjorn.andersson@...aro.org>
Subject: Re: [PATCH] power: qcom_smbb: Make an extcon for usb cable detection
Hi,
Looks good to me.
Reviewed-by: Chanwoo Choi <cw00.choi@...sung.com>
Thanks,
Chanwoo Choi
2016-06-26 14:54 GMT+09:00 Stephen Boyd <stephen.boyd@...aro.org>:
> On these PMICs the usb cable connection/disconnection is
> indicated by the usb-valid interrupt being high or low
> respectively. Let's make an extcon for that, so we can notify usb
> drivers of the cable state.
>
> Cc: Bjorn Andersson <bjorn.andersson@...aro.org>
> Cc: Chanwoo Choi <cw00.choi@...sung.com>
> Signed-off-by: Stephen Boyd <stephen.boyd@...aro.org>
> ---
> drivers/power/qcom_smbb.c | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
> diff --git a/drivers/power/qcom_smbb.c b/drivers/power/qcom_smbb.c
> index 5eb1e9e543e2..b5896ba2a602 100644
> --- a/drivers/power/qcom_smbb.c
> +++ b/drivers/power/qcom_smbb.c
> @@ -34,6 +34,7 @@
> #include <linux/power_supply.h>
> #include <linux/regmap.h>
> #include <linux/slab.h>
> +#include <linux/extcon.h>
>
> #define SMBB_CHG_VMAX 0x040
> #define SMBB_CHG_VSAFE 0x041
> @@ -111,6 +112,7 @@ struct smbb_charger {
> unsigned int revision;
> unsigned int addr;
> struct device *dev;
> + struct extcon_dev *edev;
>
> bool dc_disabled;
> bool jeita_ext_temp;
> @@ -125,6 +127,11 @@ struct smbb_charger {
> struct regmap *regmap;
> };
>
> +static const unsigned int smbb_usb_extcon_cable[] = {
> + EXTCON_USB,
> + EXTCON_NONE,
> +};
> +
> static int smbb_vbat_weak_fn(unsigned int index)
> {
> return 2100000 + index * 100000;
> @@ -371,6 +378,8 @@ static irqreturn_t smbb_usb_valid_handler(int irq, void *_data)
> struct smbb_charger *chg = _data;
>
> smbb_set_line_flag(chg, irq, STATUS_USBIN_VALID);
> + extcon_set_cable_state_(chg->edev, EXTCON_USB,
> + chg->status & STATUS_USBIN_VALID);
> power_supply_changed(chg->usb_psy);
>
> return IRQ_HANDLED;
> @@ -849,6 +858,18 @@ static int smbb_charger_probe(struct platform_device *pdev)
> return PTR_ERR(chg->usb_psy);
> }
>
> + chg->edev = devm_extcon_dev_allocate(&pdev->dev, smbb_usb_extcon_cable);
> + if (IS_ERR(chg->edev)) {
> + dev_err(&pdev->dev, "failed to allocate extcon device\n");
> + return -ENOMEM;
> + }
> +
> + rc = devm_extcon_dev_register(&pdev->dev, chg->edev);
> + if (rc < 0) {
> + dev_err(&pdev->dev, "failed to register extcon device\n");
> + return rc;
> + }
> +
> if (!chg->dc_disabled) {
> dc_cfg.drv_data = chg;
> dc_cfg.supplied_to = smbb_bif;
> --
> 2.9.0.rc2.8.ga28705d
>
Powered by blists - more mailing lists