[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1467010990-28070-1-git-send-email-florian.vaussard@heig-vd.ch>
Date: Mon, 27 Jun 2016 09:03:08 +0200
From: Florian Vaussard <florian.vaussard@...il.com>
To: devicetree@...r.kernel.org, Richard Purdie <rpurdie@...ys.net>,
Jacek Anaszewski <j.anaszewski@...sung.com>
Cc: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Pavel Machek <pavel@....cz>, linux-leds@...r.kernel.org,
linux-kernel@...r.kernel.org,
Florian Vaussard <florian.vaussard@...g-vd.ch>
Subject: [PATCH v2 0/2] leds: Add driver for NCP5623 3-channel I2C LED driver
Hello,
This series add a new driver for On Semiconductor NCP5623, a 3-channel I2C
LED driver. It is used in our design to drive a RGB LED.
The first patch introduces the device tree binding, while the second patch
adds the driver itself.
Best regards,
Florian
---
Jacek: I did not addressed your request about dynamic allocation,
as discussed by Pavel and me in the previous thread. Tell me if
you are fine like this. Otherwise I will do the necessary changes.
---
Since v1:
- Adapted the DT binding (led-max-microamp for each LED node)
- Removed underscores from node names in the example
- Use brightness_set_blocking to avoid workqueue
- Introduced LED_to_CMD macro to avoid switch statement
- Various other fixes
Florian Vaussard (2):
leds: ncp5623: Add device tree binding documentation
leds: Add driver for NCP5623 3-channel I2C LED driver
.../devicetree/bindings/leds/leds-ncp5623.txt | 60 +++++
drivers/leds/Kconfig | 11 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-ncp5623.c | 269 +++++++++++++++++++++
4 files changed, 341 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-ncp5623.txt
create mode 100644 drivers/leds/leds-ncp5623.c
--
2.5.5
Powered by blists - more mailing lists