| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1467010990-28070-3-git-send-email-florian.vaussard@heig-vd.ch>
Date: Mon, 27 Jun 2016 09:03:10 +0200
From: Florian Vaussard <florian.vaussard@...il.com>
To: devicetree@...r.kernel.org, Richard Purdie <rpurdie@...ys.net>,
Jacek Anaszewski <j.anaszewski@...sung.com>
Cc: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Pavel Machek <pavel@....cz>, linux-leds@...r.kernel.org,
linux-kernel@...r.kernel.org,
Florian Vaussard <florian.vaussard@...g-vd.ch>
Subject: [PATCH v2 2/2] leds: Add driver for NCP5623 3-channel I2C LED driver
The NCP5623 is a 3-channel LED driver from On Semiconductor controlled
through I2C. The PWM of each channel can be independently set with 32
distinct levels. In addition, the intensity of the current source can be
globally set using an external bias resistor fixing the reference
current (Iref) and a dedicated register (ILED), following the
relationship:
I = 2400*Iref/(31-ILED)
with Iref = Vref/Rbias, and Vref = 0.6V.
Signed-off-by: Florian Vaussard <florian.vaussard@...g-vd.ch>
---
drivers/leds/Kconfig | 11 ++
drivers/leds/Makefile | 1 +
drivers/leds/leds-ncp5623.c | 269 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 281 insertions(+)
create mode 100644 drivers/leds/leds-ncp5623.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 5ae2834..6d3e44d 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -588,6 +588,17 @@ config LEDS_BLINKM
This option enables support for the BlinkM RGB LED connected
through I2C. Say Y to enable support for the BlinkM LED.
+config LEDS_NCP5623
+ tristate "LED Support for NCP5623 I2C chip"
+ depends on LEDS_CLASS
+ depends on I2C
+ help
+ This option enables support for LEDs connected to NCP5623
+ LED driver chips accessed via the I2C bus.
+ Driver supports brightness control.
+
+ Say Y to enable this driver.
+
config LEDS_POWERNV
tristate "LED support for PowerNV Platform"
depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index cb2013d..a2f0e10 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -67,6 +67,7 @@ obj-$(CONFIG_LEDS_KTD2692) += leds-ktd2692.o
obj-$(CONFIG_LEDS_POWERNV) += leds-powernv.o
obj-$(CONFIG_LEDS_SEAD3) += leds-sead3.o
obj-$(CONFIG_LEDS_IS31FL32XX) += leds-is31fl32xx.o
+obj-$(CONFIG_LEDS_NCP5623) += leds-ncp5623.o
# LED SPI Drivers
obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
diff --git a/drivers/leds/leds-ncp5623.c b/drivers/leds/leds-ncp5623.c
new file mode 100644
index 0000000..6e4c969
--- /dev/null
+++ b/drivers/leds/leds-ncp5623.c
@@ -0,0 +1,269 @@
+/*
+ * Copyright 2016 Florian Vaussard <florian.vaussard@...g-vd.ch>
+ *
+ * Based on leds-tlc591xx.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/bitops.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+
+#define NCP5623_MAX_LEDS 3
+#define NCP5623_MAX_STEPS 31
+#define NCP5623_MAX_CURRENT 31
+#define NCP5623_MAX_CURRENT_UA 30000
+
+#define NCP5623_CMD_SHIFT 5
+#define CMD_SHUTDOWN (0x00 << NCP5623_CMD_SHIFT)
+#define CMD_ILED (0x01 << NCP5623_CMD_SHIFT)
+#define CMD_PWM1 (0x02 << NCP5623_CMD_SHIFT)
+#define CMD_PWM2 (0x03 << NCP5623_CMD_SHIFT)
+#define CMD_PWM3 (0x04 << NCP5623_CMD_SHIFT)
+#define CMD_UPWARD_DIM (0x05 << NCP5623_CMD_SHIFT)
+#define CMD_DOWNWARD_DIM (0x06 << NCP5623_CMD_SHIFT)
+#define CMD_DIM_STEP (0x07 << NCP5623_CMD_SHIFT)
+
+#define LED_to_CMD(led) ((0x02 + led) << NCP5623_CMD_SHIFT)
+
+#define NCP5623_DATA_MASK GENMASK(NCP5623_CMD_SHIFT - 1, 0)
+#define NCP5623_CMD(cmd, data) (cmd | (data & NCP5623_DATA_MASK))
+
+struct ncp5623_led {
+ bool active;
+ unsigned int led_no;
+ u32 led_max_current;
+ struct led_classdev ldev;
+ struct ncp5623_priv *priv;
+};
+
+struct ncp5623_priv {
+ struct ncp5623_led leds[NCP5623_MAX_LEDS];
+ u32 led_iref;
+ u32 leds_max_current;
+ struct i2c_client *client;
+};
+
+static struct ncp5623_led *ldev_to_led(struct led_classdev *ldev)
+{
+ return container_of(ldev, struct ncp5623_led, ldev);
+}
+
+static int ncp5623_send_cmd(struct ncp5623_priv *priv, u8 cmd, u8 data)
+{
+ char cmd_data[1] = { NCP5623_CMD(cmd, data) };
+ int err;
+
+ err = i2c_master_send(priv->client, cmd_data, ARRAY_SIZE(cmd_data));
+
+ return (err < 0 ? err : 0);
+}
+
+static int ncp5623_set_pwm(struct ncp5623_led *led, u8 brightness)
+{
+ struct ncp5623_priv *priv = led->priv;
+ u8 cmd;
+
+ cmd = LED_to_CMD(led->led_no);
+
+ return ncp5623_send_cmd(priv, cmd, brightness);
+}
+
+static int ncp5623_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct ncp5623_led *led = ldev_to_led(led_cdev);
+
+ return ncp5623_set_pwm(led, brightness);
+}
+
+static void ncp5623_destroy_devices(struct ncp5623_priv *priv)
+{
+ struct ncp5623_led *led;
+ int i;
+
+ for (i = 0; i < NCP5623_MAX_LEDS; i++) {
+ led = &priv->leds[i];
+ if (led->active) {
+ led_classdev_unregister(&led->ldev);
+ led->active = false;
+ }
+ }
+}
+
+static int ncp5623_configure(struct device *dev,
+ struct ncp5623_priv *priv)
+{
+ unsigned int i;
+ unsigned int n;
+ struct ncp5623_led *led;
+ int effective_current;
+ int err;
+
+ /* Setup the internal current source, round down */
+ n = 2400 * priv->led_iref / priv->leds_max_current + 1;
+ if (n > NCP5623_MAX_CURRENT)
+ n = NCP5623_MAX_CURRENT;
+
+ effective_current = 2400 * priv->led_iref / n;
+ dev_dbg(dev, "setting maximum current to %u uA\n", effective_current);
+
+ err = ncp5623_send_cmd(priv, CMD_ILED, NCP5623_MAX_CURRENT - n);
+ if (err < 0) {
+ dev_err(dev, "cannot set the current\n");
+ return err;
+ }
+
+ /* Setup each individual LED */
+ for (i = 0; i < NCP5623_MAX_LEDS; i++) {
+ led = &priv->leds[i];
+
+ if (!led->active)
+ continue;
+
+ led->priv = priv;
+ led->led_no = i;
+ led->ldev.brightness_set_blocking = ncp5623_brightness_set;
+
+ led->ldev.max_brightness = led->led_max_current *
+ NCP5623_MAX_STEPS / effective_current;
+ if (led->ldev.max_brightness > NCP5623_MAX_STEPS)
+ led->ldev.max_brightness = NCP5623_MAX_STEPS;
+
+ err = devm_led_classdev_register(dev, &led->ldev);
+ if (err < 0) {
+ dev_err(dev, "couldn't register LED %s\n",
+ led->ldev.name);
+ goto exit;
+ }
+ }
+
+ return 0;
+
+exit:
+ ncp5623_destroy_devices(priv);
+ return err;
+}
+
+static int ncp5623_parse_dt(struct ncp5623_priv *priv, struct device_node *np)
+{
+ struct device_node *child;
+ struct ncp5623_led *led;
+ u32 reg;
+ int count;
+ int err;
+
+ err = of_property_read_u32(np, "onnn,led-iref-microamp",
+ &priv->led_iref);
+ if (err)
+ return -EINVAL;
+
+ priv->leds_max_current = 0;
+
+ count = of_get_child_count(np);
+ if (!count || count > NCP5623_MAX_LEDS)
+ return -EINVAL;
+
+ for_each_child_of_node(np, child) {
+ err = of_property_read_u32(child, "reg", ®);
+ if (err)
+ return err;
+ if (reg < 0 || reg >= NCP5623_MAX_LEDS) {
+ err = -EINVAL;
+ goto dt_child_parse_error;
+ }
+
+ led = &priv->leds[reg];
+ if (led->active) {
+ err = -EINVAL;
+ goto dt_child_parse_error;
+ }
+ led->active = true;
+
+ err = of_property_read_u32(child, "led-max-microamp",
+ &led->led_max_current);
+ if (err || led->led_max_current > NCP5623_MAX_CURRENT_UA)
+ return -EINVAL;
+ if (led->led_max_current > priv->leds_max_current)
+ priv->leds_max_current = led->led_max_current;
+
+ led->ldev.name =
+ of_get_property(child, "label", NULL) ? : child->name;
+ led->ldev.default_trigger =
+ of_get_property(child, "linux,default-trigger", NULL);
+ }
+
+ return 0;
+
+dt_child_parse_error:
+ of_node_put(child);
+
+ return err;
+}
+
+static const struct of_device_id ncp5623_of_match[] = {
+ { .compatible = "onnn,ncp5623" },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, ncp5623_of_match);
+
+static int ncp5623_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct device_node *np = dev->of_node;
+ struct ncp5623_priv *priv;
+ int err;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->client = client;
+ i2c_set_clientdata(client, priv);
+
+ err = ncp5623_parse_dt(priv, np);
+ if (err)
+ return err;
+
+ return ncp5623_configure(dev, priv);
+}
+
+static int ncp5623_remove(struct i2c_client *client)
+{
+ struct ncp5623_priv *priv = i2c_get_clientdata(client);
+
+ ncp5623_destroy_devices(priv);
+
+ return 0;
+}
+
+static const struct i2c_device_id ncp5623_id[] = {
+ { "ncp5623" },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, ncp5623_id);
+
+static struct i2c_driver ncp5623_driver = {
+ .driver = {
+ .name = "ncp5623",
+ .of_match_table = of_match_ptr(ncp5623_of_match),
+ },
+ .probe = ncp5623_probe,
+ .remove = ncp5623_remove,
+ .id_table = ncp5623_id,
+};
+
+module_i2c_driver(ncp5623_driver);
+
+MODULE_AUTHOR("Florian Vaussard <florian.vaussard@...g-vd.ch>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("NCP5623 LED driver");
--
2.5.5
Powered by blists - more mailing lists