linux-kernel - [PATCH v3 2/2] clk: exynos5433: enable sclk

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Thu, 30 Jun 2016 16:15:11 +0900
From:	Andi Shyti <andi.shyti@...sung.com>
To:	Chanwoo Choi <cw00.choi@...sung.com>
Cc:	Jaehoon Chung <jh80.chung@...sung.com>,
	Sylwester Nawrocki <s.nawrocki@...sung.com>,
	Tomasz Figa <tomasz.figa@...il.com>,
	Michael Turquette <mturquette@...libre.com>,
	Stephen Boyd <sboyd@...eaurora.org>,
	Kukjin Kim <kgene@...nel.org>,
	Krzysztof Kozlowski <k.kozlowski@...sung.com>,
	linux-samsung-soc@...r.kernel.org, linux-clk@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	Andi Shyti <andi.shyti@...sung.com>,
	Andi Shyti <andi@...zian.org>
Subject: [PATCH v3 2/2] clk: exynos5433: enable sclk_ioclk for SPI3

enable SPI3 critical clocks by using the CLK_IS_CRITICAL flag.
There is no device which is supposed to enable this clock when
needed, therefore, the only way to use the SPI bus is to enable
it in boot time.

Suggested-by: Tomasz Figa <tomasz.figa@...il.com>
Signed-off-by: Andi Shyti <andi.shyti@...sung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@...sung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@...sung.com>
---
 drivers/clk/samsung/clk-exynos5433.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
index 1f7c4951..e769c80 100644
--- a/drivers/clk/samsung/clk-exynos5433.c
+++ b/drivers/clk/samsung/clk-exynos5433.c
@@ -1648,11 +1648,12 @@ static struct samsung_gate_clock peric_gate_clks[] __initdata = {
 	GATE(CLK_SCLK_IOCLK_SPI4, "sclk_ioclk_spi4", "ioclk_spi4_clk_in",
 			ENABLE_SCLK_PERIC, 21, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_IOCLK_SPI3, "sclk_ioclk_spi3", "ioclk_spi3_clk_in",
-			ENABLE_SCLK_PERIC, 20, CLK_SET_RATE_PARENT, 0),
+			ENABLE_SCLK_PERIC, 20,
+			CLK_IS_CRITICAL | CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_SPI4, "sclk_spi4", "sclk_spi4_peric", ENABLE_SCLK_PERIC,
 			19, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_SPI3, "sclk_spi3", "sclk_spi3_peric", ENABLE_SCLK_PERIC,
-			18, CLK_SET_RATE_PARENT, 0),
+			18, CLK_IS_CRITICAL | CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_SCI, "sclk_sci", "div_sclk_sci", ENABLE_SCLK_PERIC,
 			17, 0, 0),
 	GATE(CLK_SCLK_SC_IN, "sclk_sc_in", "div_sclk_sc_in", ENABLE_SCLK_PERIC,
-- 
2.8.1