| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <577D0A1F.9070007@samsung.com>
Date: Wed, 06 Jul 2016 15:39:43 +0200
From: Krzysztof Kozlowski <k.kozlowski@...sung.com>
To: Andy Yan <andy.yan@...k-chips.com>, robh+dt@...nel.org,
heiko@...ech.de, john.stultz@...aro.org, arnd@...db.de,
bjorn.andersson@...aro.org
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
alexandre.belloni@...e-electrons.com, dbaryshkov@...il.com,
sre@...nel.org, matthias.bgg@...il.com, linux-pm@...r.kernel.org,
mbrugger@...e.com, lorenzo.pieralisi@....com,
moritz.fischer@...us.com, richard@....at
Subject: Re: [PATCH v9 2/4] power: reset: add reboot mode driver
On 06/20/2016 08:38 AM, Andy Yan wrote:
> This driver parses the reboot commands like "reboot bootloader"
> and "reboot recovery" to get a boot mode described in the
> device tree , then call the write interfae to store the boot
> mode in some place like special register or sram, which can
> be read by the bootloader after system reboot, then the bootloader
> can take different action according to the mode stored.
>
> This is commonly used on Android based devices, in order to
> reboot the device into fastboot or recovery mode.
>
> Reviewed-by: Matthias Brugger <matthias.bgg@...il.com>
> Reviewed-by: Moritz Fischer <moritz.fischer@...us.com>
> Tested-by: John Stultz <john.stultz@...aro.org>
> Acked-by: John Stultz <john.stultz@...aro.org>
> Signed-off-by: Andy Yan <andy.yan@...k-chips.com>
>
> ---
>
> Changes in v9:
> - select MFD_SYSCON when syscon-reboot-mode driver enabled
> - refactoring error handling in reboot_mode_register
>
> Changes in v8:
> - do some cleanup when driver ubind
>
> Changes in v7:
> - address some suggestions from Krzysztof, make syscon-reboot-mode driver data self-contained.
>
> Changes in v6: None
> Changes in v5:
> - use two blank space under help in Kconfig
> - use unsigned int instead of int for member magic in struct mode_info
>
> Changes in v4:
> - make this driver depends on OF to avoid kbuild test error
>
> Changes in v3:
> - scan multi properities
> - add mask value for some platform which only use some bits of the register
> to store boot mode magic value
>
> Changes in v2:
> - move to dir drivers/power/reset/
> - make syscon-reboot-mode a generic driver
>
> Changes in v1:
> - fix the embarrassed compile warning
> - correct the maskrom magic number
> - check for the normal reboot
>
> drivers/power/reset/Kconfig | 14 ++++
> drivers/power/reset/Makefile | 2 +
> drivers/power/reset/reboot-mode.c | 128 +++++++++++++++++++++++++++++++
> drivers/power/reset/reboot-mode.h | 14 ++++
> drivers/power/reset/syscon-reboot-mode.c | 100 ++++++++++++++++++++++++
> 5 files changed, 258 insertions(+)
> create mode 100644 drivers/power/reset/reboot-mode.c
> create mode 100644 drivers/power/reset/reboot-mode.h
> create mode 100644 drivers/power/reset/syscon-reboot-mode.c
One minor whitespace issue at the end but beside that:
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
(...)
> diff --git a/drivers/power/reset/syscon-reboot-mode.c b/drivers/power/reset/syscon-reboot-mode.c
> new file mode 100644
> index 0000000..22e0685
> --- /dev/null
> +++ b/drivers/power/reset/syscon-reboot-mode.c
> @@ -0,0 +1,100 @@
> +/*
> + * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/reboot.h>
> +#include <linux/regmap.h>
> +#include <linux/mfd/syscon.h>
> +#include "reboot-mode.h"
> +
> +struct syscon_reboot_mode {
> + struct regmap *map;
> + struct reboot_mode_driver reboot;
> + u32 offset;
> + u32 mask;
> +};
> +
> +static int syscon_reboot_mode_write(struct reboot_mode_driver *reboot,
> + unsigned int magic)
> +{
> + struct syscon_reboot_mode *syscon_rbm;
> + int ret;
> +
> + syscon_rbm = container_of(reboot, struct syscon_reboot_mode, reboot);
> +
> + ret = regmap_update_bits(syscon_rbm->map, syscon_rbm->offset,
> + syscon_rbm->mask, magic);
> + if (ret < 0)
> + dev_err(reboot->dev, "update reboot mode bits failed\n");
> +
> + return ret;
> +}
> +
> +static int syscon_reboot_mode_probe(struct platform_device *pdev)
> +{
> + int ret;
> + struct syscon_reboot_mode *syscon_rbm;
> +
> + syscon_rbm = devm_kzalloc(&pdev->dev, sizeof(*syscon_rbm), GFP_KERNEL);
> + if (!syscon_rbm)
> + return -ENOMEM;
> +
> + syscon_rbm->reboot.dev = &pdev->dev;
> + syscon_rbm->reboot.write = syscon_reboot_mode_write;
> + syscon_rbm->mask = 0xffffffff;
> +
> + dev_set_drvdata(&pdev->dev, syscon_rbm);
> +
> + syscon_rbm->map = syscon_node_to_regmap(pdev->dev.parent->of_node);
> + if (IS_ERR(syscon_rbm->map))
> + return PTR_ERR(syscon_rbm->map);
> +
> + if (of_property_read_u32(pdev->dev.of_node, "offset",
> + &syscon_rbm->offset))
> + return -EINVAL;
> +
> + of_property_read_u32(pdev->dev.of_node, "mask", &syscon_rbm->mask);
> +
> +
Just one new line.
Best regards,
Krzysztof
> + ret = reboot_mode_register(&syscon_rbm->reboot);
> + if (ret)
> + dev_err(&pdev->dev, "can't register reboot mode\n");
> +
> + return ret;
> +}
> +
> +static int syscon_reboot_mode_remove(struct platform_device *pdev)
> +{
> + struct syscon_reboot_mode *syscon_rbm = dev_get_drvdata(&pdev->dev);
> +
> + return reboot_mode_unregister(&syscon_rbm->reboot);
> +}
> +
> +static const struct of_device_id syscon_reboot_mode_of_match[] = {
> + { .compatible = "syscon-reboot-mode" },
> + {}
> +};
> +
> +static struct platform_driver syscon_reboot_mode_driver = {
> + .probe = syscon_reboot_mode_probe,
> + .remove = syscon_reboot_mode_remove,
> + .driver = {
> + .name = "syscon-reboot-mode",
> + .of_match_table = syscon_reboot_mode_of_match,
> + },
> +};
> +module_platform_driver(syscon_reboot_mode_driver);
> +
> +MODULE_AUTHOR("Andy Yan <andy.yan@...k-chips.com");
> +MODULE_DESCRIPTION("SYSCON reboot mode driver");
> +MODULE_LICENSE("GPL v2");
>
Powered by blists - more mailing lists