[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <577F6E83.3080006@st.com>
Date: Fri, 8 Jul 2016 11:12:35 +0200
From: Gabriel Fernandez <gabriel.fernandez@...com>
To: Michael Turquette <mturquette@...libre.com>,
Rob Herring <robh@...nel.org>,
Gabriel Fernandez <gabriel.fernandez@...aro.org>
CC: Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Srinivas Kandagatla <srinivas.kandagatla@...il.com>,
Maxime Coquelin <maxime.coquelin@...com>,
Patrice Chotard <patrice.chotard@...com>,
Russell King <linux@...linux.org.uk>,
Stephen Boyd <sboyd@...eaurora.org>,
Olivier Bideau <olivier.bideau@...com>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
Andrzej Hajda <a.hajda@...sung.com>,
Pankaj Dev <pankaj.dev@...com>,
Dinh Nguyen <dinguyen@...nsource.altera.com>,
Arnd Bergmann <arnd@...db.de>,
Thierry Reding <treding@...dia.com>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <kernel@...inux.com>,
<linux-clk@...r.kernel.org>, Lee Jones <lee.jones@...aro.org>,
Peter Griffin <peter.griffin@...aro.org>,
<arnaud.pouliquen@...com>, <benjamin.gaignard@...com>,
<vincent.abriou@...com>
Subject: Re: [RESEND PATCH v2 02/13] drivers: clk: st: Simplify clock binding
of STiH4xx platforms
Hi Mike,
On 07/08/2016 03:43 AM, Michael Turquette wrote:
> Quoting Rob Herring (2016-06-19 08:04:58)
>> On Thu, Jun 16, 2016 at 11:20:22AM +0200, Gabriel Fernandez wrote:
>>> This patch reworks the clock binding to avoid too much detail in DT.
>>> Now we have only compatible string per type of clock
>>> (remark from Rob https://lkml.org/lkml/2016/5/25/492)
>>>
>> I have no idea what the clock trees and clock controller in these chips
>> look like, so it's hard to say if the changes here are good. It still
>> looks like things are somewhat fine grained clocks in DT. I'll leave
>> it up to the platform maintainers to decide...
> Is this series breaking ABI? If yes, why not do what Maxime did for the
> Allwinner/sunxi clocks and just fully convert over to a
> one-node-per-clock-controller binding? This one-node-per-clock stuff is
> pretty unfortunate, and if we're deprecating platforms (patch #1) then
> now might be a good time to re-evaluate the whole thing.
The goal of my patchset was to be aligned with DRM / KMS development and
to offer
the possibility to make a correct video playback on STiH407/STiH410
platform.
Our milestone is the 4.8 for that.
Currently people need these patches to work.
I'm not sure it's a good time to re-evaluate the whole thing.
Is it possible to re-evaluate later ?
Best regards,
Gabriel
> Regards,
> Mike
>
>>
>>> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@...aro.org>
>>> ---
>>> .../devicetree/bindings/clock/st/st,clkgen-mux.txt | 2 +-
>>> .../devicetree/bindings/clock/st/st,clkgen-pll.txt | 11 ++--
>>> .../devicetree/bindings/clock/st/st,clkgen.txt | 2 +-
>>> .../devicetree/bindings/clock/st/st,quadfs.txt | 6 +--
>>> drivers/clk/st/clkgen-fsyn.c | 41 ++++++--------
>>> drivers/clk/st/clkgen-mux.c | 28 ++++------
>>> drivers/clk/st/clkgen-pll.c | 62 ++++++++++------------
>>> 7 files changed, 65 insertions(+), 87 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
>>> index 4d277d6..9a46cb1d7 100644
>>> --- a/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
>>> +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
>>> @@ -10,7 +10,7 @@ This binding uses the common clock binding[1].
>>> Required properties:
>>>
>>> - compatible : shall be:
>>> - "st,stih407-clkgen-a9-mux", "st,clkgen-mux"
>>> + "st,stih407-clkgen-a9-mux"
>>>
>>> - #clock-cells : from common clock binding; shall be set to 0.
>>>
>>> diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
>>> index c9fd674..be0b043 100644
>>> --- a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
>>> +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
>>> @@ -9,11 +9,10 @@ Base address is located to the parent node. See clock binding[2]
>>> Required properties:
>>>
>>> - compatible : shall be:
>>> - "st,stih407-plls-c32-a0", "st,clkgen-plls-c32"
>>> - "st,stih407-plls-c32-a9", "st,clkgen-plls-c32"
>>> - "sst,plls-c32-cx_0", "st,clkgen-plls-c32"
>>> - "sst,plls-c32-cx_1", "st,clkgen-plls-c32"
>>> - "st,stih418-plls-c28-a9", "st,clkgen-plls-c32"
>>> + "st,clkgen-pll0"
>>> + "st,clkgen-pll0"
>> Repeated. Supposed to be 0 and 1? This seems a bit generic, too.
>>
>>> + "st,stih407-clkgen-plla9"
>>> + "st,stih418-clkgen-plla9"
Powered by blists - more mailing lists