linux-kernel - Re: [PATCH 2/2] arm64: dts: set UART1 clock frequency to 150MHz

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <146799860795.73491.14234650786991740924@resonance>
Date:	Fri, 08 Jul 2016 10:23:28 -0700
From:	Michael Turquette <mturquette@...libre.com>
To:	Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@...aro.org>,
	jorge.ramirez-ortiz@...aro.org, linux@...linux.org.uk,
	xuwei5@...ilicon.com
Cc:	guodong.xu@...aro.org, sboyd@...eaurora.org,
	xinliang.liu@...aro.org, john.stultz@...aro.org,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/2] arm64: dts: set UART1 clock frequency to 150MHz

Quoting Jorge Ramirez-Ortiz (2016-07-08 01:11:07)
> Enable support for higher baud rates (up to 3Mbps) in UART1 - required
> for bluetooth transfers.
> 
> Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@...aro.org>
> Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@...aro.org>

Reviewed-by: Michael Turquette <mturquette@...libre.com>

> ---
>  arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> index e92a30c..27be812 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> @@ -55,6 +55,8 @@
>                 };
>  
>                 uart1: uart@...11000 {
> +                       assigned-clocks = <&sys_ctrl HI6220_UART1_SRC>;
> +                       assigned-clock-rates = <150000000>;
>                         status = "ok";
>                 };
>  
> -- 
> 2.7.4
>