[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1467999399-22288-1-git-send-email-f.fainelli@gmail.com>
Date: Fri, 8 Jul 2016 10:36:39 -0700
From: Florian Fainelli <f.fainelli@...il.com>
To: linux-mtd@...ts.infradead.org
Cc: Florian Fainelli <f.fainelli@...il.com>,
Brian Norris <computersforpeace@...il.com>,
Kamal Dasu <kdasu.kdev@...il.com>,
Boris Brezillon <boris.brezillon@...e-electrons.com>,
Richard Weinberger <richard@....at>,
David Woodhouse <dwmw2@...radead.org>,
bcm-kernel-feedback-list@...adcom.com (open list:BROADCOM STB NAND
FLASH DRIVER), linux-kernel@...r.kernel.org (open list)
Subject: [PATCH] mtd: nand: brcmnand: Change BUG_ON in brcmnand_send_cmd
Change the BUG_ON() condition in brcmnand_send_cmd() which checks for
the interrupt status "controller ready" bit to a WARN_ON.
There is no good reason to kill the system when this condition occur
because we could have systems which listed the NAND controller as
available (e.g: from Device Tree), but the NAND chip could be
malfunctioning and not responding.
Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
---
Note that I even hesitated to remove that completely, but there is
some value in knowing about this condition since it helps figuring
out what could be wrong.
drivers/mtd/nand/brcmnand/brcmnand.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/brcmnand/brcmnand.c b/drivers/mtd/nand/brcmnand/brcmnand.c
index b6062a2f3dfd..72bdc283778d 100644
--- a/drivers/mtd/nand/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/brcmnand/brcmnand.c
@@ -1165,7 +1165,7 @@ static void brcmnand_send_cmd(struct brcmnand_host *host, int cmd)
ctrl->cmd_pending = cmd;
intfc = brcmnand_read_reg(ctrl, BRCMNAND_INTFC_STATUS);
- BUG_ON(!(intfc & INTFC_CTLR_READY));
+ WARN_ON(!(intfc & INTFC_CTLR_READY));
mb(); /* flush previous writes */
brcmnand_write_reg(ctrl, BRCMNAND_CMD_START,
--
2.7.4
Powered by blists - more mailing lists