| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20160717200311.GA6588@rob-hp-laptop>
Date: Sun, 17 Jul 2016 15:03:11 -0500
From: Rob Herring <robh@...nel.org>
To: njaigane@...eaurora.org
Cc: linux-arm-msm@...r.kernel.org, linux@....qualcomm.com,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-soc@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
twp@...eaurora.org, andy.gross@...aro.org, david.brown@...aro.org,
pawel.moll@....com, mark.rutland@....com,
ijc+devicetree@...lion.org.uk, galak@...eaurora.org,
linux@...linux.org.uk, mturquette@...libre.com,
sboyd@...eaurora.org, linus.walleij@...aro.org,
plai@...eaurora.org, bgoswami@...eaurora.org, lgirdwood@...il.com,
broonie@...nel.org, perex@...ex.cz, tiwai@...e.com,
bjorn.andersson@...aro.org, varada@...eaurora.org,
pradeepb@...eaurora.org, snlakshm@...eaurora.org,
linux-clk@...r.kernel.org, linux-gpio@...r.kernel.org,
alsa-devel@...a-project.org, bselvara@...eaurora.org
Subject: Re: [PATCH 1/4] qcom: ipq4019: Add ipq4019 ASoC device tree changes
On Fri, Jul 15, 2016 at 12:37:03PM +0530, njaigane@...eaurora.org wrote:
> From: Jaiganesh Narayanan <njaigane@...eaurora.org>
>
> This patch adds the ipq4019 ASoC device tree changes and the
> binding documentation for pcm, spdif, tdm, stereo, codec, mbox,
> adss modules
>
> Signed-off-by: Jaiganesh Narayanan <njaigane@...eaurora.org>
> ---
> .../bindings/sound/qca,ipq4019-audio-adss.txt | 20 ++
> .../bindings/sound/qca,ipq4019-audio.txt | 13 ++
> .../bindings/sound/qca,ipq4019-codec.txt | 15 ++
> .../devicetree/bindings/sound/qca,ipq4019-i2s.txt | 33 +++
> .../devicetree/bindings/sound/qca,ipq4019-i2s1.txt | 29 +++
> .../devicetree/bindings/sound/qca,ipq4019-i2s2.txt | 29 +++
> .../devicetree/bindings/sound/qca,ipq4019-mbox.txt | 23 ++
> .../bindings/sound/qca,ipq4019-pcm-i2s.txt | 15 ++
> .../bindings/sound/qca,ipq4019-pcm-i2s1.txt | 15 ++
> .../bindings/sound/qca,ipq4019-pcm-i2s2.txt | 15 ++
> .../bindings/sound/qca,ipq4019-pcm-spdif.txt | 15 ++
> .../bindings/sound/qca,ipq4019-pcm-tdm.txt | 15 ++
> .../bindings/sound/qca,ipq4019-spdif.txt | 35 +++
> .../bindings/sound/qca,ipq4019-stereo.txt | 17 ++
> .../devicetree/bindings/sound/qca,ipq4019-tdm.txt | 33 +++
> arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 195 ++++++++++++++--
> arch/arm/boot/dts/qcom-ipq4019.dtsi | 247 ++++++++++++++++++++-
> 17 files changed, 742 insertions(+), 22 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/sound/qca,ipq4019-audio-adss.txt
> create mode 100644 Documentation/devicetree/bindings/sound/qca,ipq4019-audio.txt
> create mode 100644 Documentation/devicetree/bindings/sound/qca,ipq4019-codec.txt
> create mode 100644 Documentation/devicetree/bindings/sound/qca,ipq4019-i2s.txt
> create mode 100644 Documentation/devicetree/bindings/sound/qca,ipq4019-i2s1.txt
> create mode 100644 Documentation/devicetree/bindings/sound/qca,ipq4019-i2s2.txt
> create mode 100644 Documentation/devicetree/bindings/sound/qca,ipq4019-mbox.txt
> create mode 100644 Documentation/devicetree/bindings/sound/qca,ipq4019-pcm-i2s.txt
> create mode 100644 Documentation/devicetree/bindings/sound/qca,ipq4019-pcm-i2s1.txt
> create mode 100644 Documentation/devicetree/bindings/sound/qca,ipq4019-pcm-i2s2.txt
> create mode 100644 Documentation/devicetree/bindings/sound/qca,ipq4019-pcm-spdif.txt
> create mode 100644 Documentation/devicetree/bindings/sound/qca,ipq4019-pcm-tdm.txt
> create mode 100644 Documentation/devicetree/bindings/sound/qca,ipq4019-spdif.txt
> create mode 100644 Documentation/devicetree/bindings/sound/qca,ipq4019-stereo.txt
> create mode 100644 Documentation/devicetree/bindings/sound/qca,ipq4019-tdm.txt
>
> diff --git a/Documentation/devicetree/bindings/sound/qca,ipq4019-audio-adss.txt b/Documentation/devicetree/bindings/sound/qca,ipq4019-audio-adss.txt
> new file mode 100644
> index 0000000..5ba2b9d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qca,ipq4019-audio-adss.txt
> @@ -0,0 +1,20 @@
> +* Qualcomm Technologies IPQ4019 ASoC audio subsystem driver
> +
> +This node models the Qualcomm Technologies IPQ4019 ASoC audio subsystem driver
> +
> +Required properties:
> +
> +- compatible : "qca,ipq4019-audio-adss"
> +- reg : should have the stereo register address, length
> +- resets : references to the reset controllers
> +- reset-names : should be "blk_rst"
> +
> +
> +Example:
> +audio: audio@...0000 {
> + compatible = "qca,ipq4019-audio-adss";
> + reg = <0x7700000 0x34>;
> + resets = <&gcc AUDIO_BLK_ARES>;
> + reset-names = "blk_rst";
> + status = "disabled";
> +};
> diff --git a/Documentation/devicetree/bindings/sound/qca,ipq4019-audio.txt b/Documentation/devicetree/bindings/sound/qca,ipq4019-audio.txt
> new file mode 100644
> index 0000000..fde039f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qca,ipq4019-audio.txt
> @@ -0,0 +1,13 @@
> +* Qualcomm Technologies IPQ4019 ASoC machine driver
> +
> +This node models the Qualcomm Technologies IPQ4019 ASoC machine driver
ASoC machine driver is a Linuxism.
> +
> +Required properties:
> +
> +- compatible : "qca,ipq4019-audio"
> +
> +Example:
> +
> +sound: sound {
> + compatible = "qca,ipq4019-audio";
I'd expect something else in here like phandle links to sub blocks. This
alone just for purposes of instantiating a driver is not acceptible.
> +};
> diff --git a/Documentation/devicetree/bindings/sound/qca,ipq4019-codec.txt b/Documentation/devicetree/bindings/sound/qca,ipq4019-codec.txt
> new file mode 100644
> index 0000000..3df7742d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qca,ipq4019-codec.txt
> @@ -0,0 +1,15 @@
> +* Qualcomm Technologies IPQ4019 ASoC Codec driver
> +
> +This node models the Qualcomm Technologies IPQ4019 ASoC Codec driver
> +
> +Required properties:
> +
> +- compatible : "qca,ipq4019-codec"
> +- reg : should have the stereo i2c register address
> +
> +Example:
> +qca_codec: qca_codec@12 {
Don't use '_' in node names, just 'codec@...'.
> + compatible = "qca,ipq4019-codec";
> + reg = <0x12>;
> + status = "disabled";
> +};
> diff --git a/Documentation/devicetree/bindings/sound/qca,ipq4019-i2s.txt b/Documentation/devicetree/bindings/sound/qca,ipq4019-i2s.txt
> new file mode 100644
> index 0000000..af9b63e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qca,ipq4019-i2s.txt
> @@ -0,0 +1,33 @@
> +* Qualcomm Technologies IPQ4019 ASoC PCM driver
Bindings describe h/w, not ASoC or drivers.
> +
> +This node models the Qualcomm Technologies IPQ4019 ASoC I2S PCM driver
> +
> +Required properties:
> +
> +- compatible : "qca,ipq4019-i2s"
> +- dma-tx-channel : should have the mbox tx channel id
> +- dma-rx-channel : should have the mbox rx channel id
> +- stereo-tx-port : should have the stereo tx id
> +- stereo-rx-port : should have the stereo rx id
> +- clocks : should have the audio tx bit clock, tx master clock,
> + rx bit clock, rx master clock id
> +- clock-names : should be "audio_tx_bclk", "audio_tx_mclk", "audio_rx_bclk",
> + "audio_rx_mclk"
> +
> +Example:
> +i2s: ipq4019-pcm-i2s@0 {
Just i2s@... Though 0 here is not valid without a reg property. There's
no registers?
> + compatible = "qca,ipq4019-i2s";
> + dma-tx-channel = <MBOX0_TX_ID>;
> + dma-rx-channel = <MBOX3_RX_ID>;
> + stereo-tx-port = <STEREO0_ID>;
> + stereo-rx-port = <STEREO3_ID>;
> + clocks = <&adcc ADCC_TXB_CLK_SRC>,
> + <&adcc ADCC_TXM_CLK_SRC>,
> + <&adcc ADCC_RXB_CLK_SRC>,
> + <&adcc ADCC_RXM_CLK_SRC>;
> + clock-names = "audio_tx_bclk",
> + "audio_tx_mclk",
> + "audio_rx_bclk",
> + "audio_rx_mclk";
> + status = "disabled";
> +};
> diff --git a/Documentation/devicetree/bindings/sound/qca,ipq4019-i2s1.txt b/Documentation/devicetree/bindings/sound/qca,ipq4019-i2s1.txt
> new file mode 100644
> index 0000000..47333b3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qca,ipq4019-i2s1.txt
> @@ -0,0 +1,29 @@
> +* Qualcomm Technologies IPQ4019 ASoC I2S PCM driver
ditto
> +
> +This node models the Qualcomm Technologies IPQ4019 ASoC I2S PCM driver
> +
> +Required properties:
> +
> +- compatible : "qca,ipq4019-i2s1"
What's the difference between this and the previous one.
> +- dma-tx-channel : should have the mbox tx channel id
> +- stereo-tx-port : should have the stereo tx id
> +- clocks : should have the audio tx bit clock, tx master clock,
> + rx bit clock, rx master clock id
> +- clock-names : should be "audio_tx_bclk", "audio_tx_mclk", "audio_rx_bclk",
> + "audio_rx_mclk"
> +
> +Example:
> +i2s1: ipq4019-pcm-i2s1@0 {
> + compatible = "qca,ipq4019-i2s1";
> + dma-tx-channel = <MBOX1_TX_ID>;
> + stereo-tx-port = <STEREO1_ID>;
> + clocks = <&adcc ADCC_TXB_CLK_SRC>,
> + <&adcc ADCC_TXM_CLK_SRC>,
> + <&adcc ADCC_RXB_CLK_SRC>,
> + <&adcc ADCC_RXM_CLK_SRC>;
> + clock-names = "audio_tx_bclk",
> + "audio_tx_mclk",
> + "audio_rx_bclk",
> + "audio_rx_mclk";
> + status = "disabled";
> +};
> diff --git a/Documentation/devicetree/bindings/sound/qca,ipq4019-i2s2.txt b/Documentation/devicetree/bindings/sound/qca,ipq4019-i2s2.txt
> new file mode 100644
> index 0000000..9af0113
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qca,ipq4019-i2s2.txt
> @@ -0,0 +1,29 @@
> +* Qualcomm Technologies IPQ4019 ASoC I2S PCM driver
> +
> +This node models the Qualcomm Technologies IPQ4019 ASoC I2S PCM driver
> +
> +Required properties:
> +
> +- compatible : "qca,ipq4019-i2s2"
> +- dma-tx-channel : should have the mbox tx channel id
> +- stereo-tx-port : should have the stereo tx id
> +- clocks : should have the audio tx bit clock, tx master clock,
> + rx bit clock, rx master clock id
> +- clock-names : should be "audio_tx_bclk", "audio_tx_mclk", "audio_rx_bclk",
> + "audio_rx_mclk"
> +
> +Example:
> +i2s1: ipq4019-pcm-i2s2@0 {
> + compatible = "qca,ipq4019-i2s2";
> + dma-tx-channel = <MBOX2_TX_ID>;
> + stereo-tx-port = <STEREO2_ID>;
> + clocks = <&adcc ADCC_TXB_CLK_SRC>,
> + <&adcc ADCC_TXM_CLK_SRC>,
> + <&adcc ADCC_RXB_CLK_SRC>,
> + <&adcc ADCC_RXM_CLK_SRC>;
> + clock-names = "audio_tx_bclk",
> + "audio_tx_mclk",
> + "audio_rx_bclk",
> + "audio_rx_mclk";
> + status = "disabled";
> +};
> diff --git a/Documentation/devicetree/bindings/sound/qca,ipq4019-mbox.txt b/Documentation/devicetree/bindings/sound/qca,ipq4019-mbox.txt
> new file mode 100644
> index 0000000..51d6c51
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qca,ipq4019-mbox.txt
> @@ -0,0 +1,23 @@
> +* Qualcomm Technologies IPQ4019 ASoC MBOX driver
> +
> +This node models the Qualcomm Technologies IPQ4019 ASoC mbox driver
> +
> +Required properties:
> +
> +- compatible : "qca,ipq4019-mbox"
> +- dma-index : should have the mbox dma index
What is this exactly?
> +- reg : should have the stereo register address, length
> +- interrupts : should have the mbox interrupt no
> +- tx-channel : should have the mbox tx id
> +- rx-channel : should have the mbox rx id
> +
> +Example:
> +mbox0: mbox@...8000 {
> + compatible = "qca,ipq4019-mbox";
> + dma-index = <0>;
> + reg = <0x7708000 0x1000>;
> + interrupts = <0 156 0>;
> + tx-channel = <MBOX0_TX_ID>;
> + rx-channel = <MBOX0_RX_ID>;
> + status = "disabled";
> +};
> diff --git a/Documentation/devicetree/bindings/sound/qca,ipq4019-pcm-i2s.txt b/Documentation/devicetree/bindings/sound/qca,ipq4019-pcm-i2s.txt
> new file mode 100644
> index 0000000..a47c7fb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qca,ipq4019-pcm-i2s.txt
> @@ -0,0 +1,15 @@
> +* Qualcomm Technologies IPQ4019 ASoC platform driver
> +
> +This node models the Qualcomm Technologies IPQ4019 ASoC platform driver
> +
> +Required properties:
> +
> +- compatible : "qca,ipq4019-pcm-i2s"
> +- reg : should have the stereo register address, length
> +
> +Example:
> +i2splatform: qca-pcm-i2s@...9000 {
> + compatible = "qca,ipq4019-pcm-i2s";
> + reg = <0x7709000 0x1000>;
> + status = "disabled";
> +};
> diff --git a/Documentation/devicetree/bindings/sound/qca,ipq4019-pcm-i2s1.txt b/Documentation/devicetree/bindings/sound/qca,ipq4019-pcm-i2s1.txt
> new file mode 100644
> index 0000000..cf23ca0b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qca,ipq4019-pcm-i2s1.txt
> @@ -0,0 +1,15 @@
> +* Qualcomm Technologies IPQ4019 ASoC platform driver
> +
> +This node models the Qualcomm Technologies IPQ4019 ASoC platform driver
Now I'm confused. How does this relate to the machine driver above? An
overview of the audio subsystem and its components would be helpful.
> +
> +Required properties:
> +
> +- compatible : "qca,ipq4019-pcm-i2s1"
> +- reg : should have the stereo register address, length
> +
> +Example:
> +i2s1platform: qca-pcm-i2s1@...b000 {
> + compatible = "qca,ipq4019-pcm-i2s1";
> + reg = <0x770b000 0x1000>;
> + status = "disabled";
> +};
> diff --git a/Documentation/devicetree/bindings/sound/qca,ipq4019-pcm-i2s2.txt b/Documentation/devicetree/bindings/sound/qca,ipq4019-pcm-i2s2.txt
> new file mode 100644
> index 0000000..ae04380
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qca,ipq4019-pcm-i2s2.txt
> @@ -0,0 +1,15 @@
> +* Qualcomm Technologies IPQ4019 ASoC platform driver
> +
> +This node models the Qualcomm Technologies IPQ4019 ASoC platform driver
> +
> +Required properties:
> +
> +- compatible : "qca,ipq4019-pcm-i2s2"
Again, why the indexing here?
> +- reg : should have the stereo register address, length
> +
> +Example:
> +i2s2platform: qca-pcm-i2s1@...d000 {
> + compatible = "qca,ipq4019-pcm-i2s2";
> + reg = <0x770d000 0x1000>;
> + status = "disabled";
> +};
> diff --git a/Documentation/devicetree/bindings/sound/qca,ipq4019-pcm-spdif.txt b/Documentation/devicetree/bindings/sound/qca,ipq4019-pcm-spdif.txt
> new file mode 100644
> index 0000000..b47c02c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qca,ipq4019-pcm-spdif.txt
> @@ -0,0 +1,15 @@
> +* Qualcomm Technologies IPQ4019 ASoC SPDIF platform driver
> +
> +This node models the Qualcomm Technologies IPQ4019 ASoC SPDIF platform driver
> +
> +Required properties:
> +
> +- compatible : "qca,ipq4019-pcm-spdif"
> +- reg : should have the stereo register address, length
> +
> +Example:
> +tdmplatform: qca-pcm-spdif@...7000 {
> + compatible = "qca,ipq4019-pcm-spdif";
> + reg = <0x7709000 0x1000>;
> + status = "disabled";
> +};
> diff --git a/Documentation/devicetree/bindings/sound/qca,ipq4019-pcm-tdm.txt b/Documentation/devicetree/bindings/sound/qca,ipq4019-pcm-tdm.txt
> new file mode 100644
> index 0000000..bd3aaa3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qca,ipq4019-pcm-tdm.txt
> @@ -0,0 +1,15 @@
> +* Qualcomm Technologies IPQ4019 ASoC TDM platform driver
> +
> +This node models the Qualcomm Technologies IPQ4019 ASoC TDM platform driver
> +
> +Required properties:
> +
> +- compatible : "qca,ipq4019-pcm-tdm"
> +- reg : should have the stereo register address, length
> +
> +Example:
> +tdmplatform: qca-pcm-tdm@...9000 {
> + compatible = "qca,ipq4019-pcm-tdm";
> + reg = <0x7709000 0x1000>;
> + status = "disabled";
> +};
> diff --git a/Documentation/devicetree/bindings/sound/qca,ipq4019-spdif.txt b/Documentation/devicetree/bindings/sound/qca,ipq4019-spdif.txt
> new file mode 100644
> index 0000000..5a80bbe
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qca,ipq4019-spdif.txt
> @@ -0,0 +1,35 @@
> +* Qualcomm Technologies IPQ4019 ASoC SPDIF driver
> +
> +This node models the Qualcomm Technologies IPQ4019 ASoC SPDIF driver
> +
> +Required properties:
> +
> +- compatible : "qca,ipq4019-spdif"
> +- dma-tx-channel : should have the mbox tx channel id
> +- dma-rx-channel : should have the mbox rx channel id
> +- stereo-tx-port : should have the stereo tx id
> +- stereo-rx-port : should have the stereo tx id
> +- clocks : should have the audio tx bit clock, tx master clock,
> + spdif clock, spdif divider clock, spdif in fast clock
> +- clock-names : should be "audio_tx_bclk", "audio_tx_mclk", "audio_spdif_src",
> + "audio_spdif_div2", "audio_spdifinfast_src"
> +
> +Example:
> +spdif: spdif@0 {
> + compatible = "qca,ipq4019-spdif";
> + dma-tx-channel = <MBOX0_TX_ID>;
> + dma-rx-channel = <MBOX3_RX_ID>;
> + stereo-tx-port = <STEREO0_ID>;
> + stereo-rx-port = <STEREO3_ID>;
> + clocks = <&adcc ADCC_TXB_CLK_SRC>,
> + <&adcc ADCC_TXM_CLK_SRC>,
> + <&adcc ADCC_SPDIF_SRC>,
> + <&adcc ADCC_SPDIFDIV2_SRC>,
> + <&adcc ADCC_AUDIO_SPDIFINFAST_SRC>;
> + clock-names = "audio_tx_bclk",
> + "audio_tx_mclk",
> + "audio_spdif_src",
> + "audio_spdif_div2",
> + "audio_spdifinfast_src";
> + status = "disabled";
> +};
> diff --git a/Documentation/devicetree/bindings/sound/qca,ipq4019-stereo.txt b/Documentation/devicetree/bindings/sound/qca,ipq4019-stereo.txt
> new file mode 100644
> index 0000000..35b4815
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qca,ipq4019-stereo.txt
> @@ -0,0 +1,17 @@
> +* Qualcomm Technologies IPQ4019 ASoC stereo driver
> +
> +This node models the Qualcomm Technologies IPQ4019 ASoC stereo driver
> +
> +Required properties:
> +
> +- compatible : "qca,ipq4019-stereo"
> +- reg : should have the stereo register address, length
> +- stereo-index : should have the stereo port index
> +
> +Example:
> +stereo0: stereo@...9000 {
> + compatible = "qca,ipq4019-stereo";
> + reg = <0x7709000 0x1000>;
> + stereo-index = <STEREO0_ID>;
> + status = "disabled";
> +};
> diff --git a/Documentation/devicetree/bindings/sound/qca,ipq4019-tdm.txt b/Documentation/devicetree/bindings/sound/qca,ipq4019-tdm.txt
> new file mode 100644
> index 0000000..c2bf38c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qca,ipq4019-tdm.txt
> @@ -0,0 +1,33 @@
> +* Qualcomm Technologies IPQ4019 ASoC TDM driver
> +
> +This node models the Qualcomm Technologies IPQ4019 ASoC TDM driver
> +
> +Required properties:
> +
> +- compatible : "qca,ipq4019-tdm"
> +- dma-tx-channel : should have the mbox tx channel id
> +- dma-rx-channel : should have the mbox rx channel id
> +- stereo-tx-port : should have the stereo tx id
> +- stereo-rx-port : should have the stereo tx id
> +- clocks : should have the audio tx bit clock, tx master clock,
> + rx bit clock, rx master clock id
> +- clock-names : should be "audio_tx_bclk", "audio_tx_mclk", "audio_rx_bclk",
> + "audio_rx_mclk"
> +
> +Example:
> +tdm: tdm@0 {
> + compatible = "qca,ipq4019-tdm";
> + dma-tx-channel = <MBOX0_TX_ID>;
> + dma-rx-channel = <MBOX3_RX_ID>;
> + stereo-tx-port = <STEREO0_ID>;
> + stereo-rx-port = <STEREO3_ID>;
> + clocks = <&adcc ADCC_TXB_CLK_SRC>,
> + <&adcc ADCC_TXM_CLK_SRC>,
> + <&adcc ADCC_RXB_CLK_SRC>,
> + <&adcc ADCC_RXM_CLK_SRC>;
> + clock-names = "audio_tx_bclk",
> + "audio_tx_mclk",
> + "audio_rx_bclk",
> + "audio_rx_mclk";
> + status = "disabled";
> +};
> diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
> index b9457dd2..e2ab95a 100644
> --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
This should be a separate patch.
> @@ -1,4 +1,4 @@
> -/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
> +/* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
> *
> * Permission to use, copy, modify, and/or distribute this software for any
> * purpose with or without fee is hereby granted, provided that the above
> @@ -20,26 +20,7 @@
> model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
> compatible = "qcom,ipq4019";
>
> - clocks {
> - xo: xo {
> - compatible = "fixed-clock";
> - clock-frequency = <48000000>;
> - #clock-cells = <0>;
> - };
> - };
> -
> soc {
> -
> -
> - timer {
> - compatible = "arm,armv7-timer";
> - interrupts = <1 2 0xf08>,
> - <1 3 0xf08>,
> - <1 4 0xf08>,
> - <1 1 0xf08>;
> - clock-frequency = <48000000>;
> - };
> -
This hunk looks unrelated.
> pinctrl@...1000000 {
> serial_pins: serial_pinmux {
> mux {
> @@ -69,6 +50,81 @@
> bias-disable;
> output-high;
> };
> +
> + };
> +
> + audio_pins: audio_pinmux {
> + mux_1 {
> + pins = "gpio25", "gpio53", "gpio60";
> + function = "i2s_tx_bclk";
> + bias-pull,up;
> + };
> +
> + mux_2 {
> + pins = "gpio27", "gpio54", "gpio63";
> + function = "i2s_txd1";
> + bias-pull,up;
> + };
> +
> + mux_3 {
> + pins = "gpio28", "gpio55";
> + function = "i2s_txd2";
> + bias-pull,up;
> + };
> +
> + mux_4 {
> + pins = "gpio29", "gpio56";
> + function = "i2s_txd3";
> + bias-pull,up;
> + };
> +
> + mux_5 {
> + pins = "gpio24", "gpio52";
> + function = "i2s_tx_mclk";
> + bias-pull,up;
> + };
> +
> + mux_6 {
> + pins = "gpio26", "gpio57", "gpio61";
> + function = "i2s_tx_fsync";
> + bias-pull,up;
> + };
> +
> + mux_7 {
> + pins = "gpio2", "gpio23", "gpio63";
> + function = "i2s_rxd";
> + bias-pull,up;
> + };
> +
> + mux_8 {
> + pins = "gpio20", "gpio58";
> + function = "i2s_rx_mclk";
> + bias-pull,up;
> + };
> +
> + mux_9 {
> + pins = "gpio0", "gpio21", "gpio60";
> + function = "i2s_rx_bclk";
> + bias-pull,up;
> + };
> +
> + mux_10 {
> + pins = "gpio1", "gpio22", "gpio61";
> + function = "i2s_rx_fsync";
> + bias-pull,up;
> + };
> +
> + mux_11 {
> + pins = "gpio34", "gpio59", "gpio63";
> + function = "i2s_spdif_in";
> + bias-pull,up;
> + };
> +
> + mux_12 {
> + pins = "gpio35", "gpio62", "gpio63";
> + function = "i2s_spdif_out";
> + bias-pull,up;
> + };
> };
> };
>
> @@ -108,5 +164,104 @@
> watchdog@...7000 {
> status = "ok";
> };
> +
> + adcc: clock-controller@...0038 {
> + status = "ok";
> + };
> +
> + audio: audio@...0000 {
> + status = "ok";
> + };
> +
> + mbox0: mbox@...8000 {
> + status = "ok";
> + };
> +
> + mbox1: mbox@...a000 {
> + status = "ok";
> + };
> +
> + mbox2: mbox@...c000 {
> + status = "ok";
> + };
> +
> + mbox3: mbox@...e000 {
> + status = "ok";
> + };
> +
> + mbox4: mbox@...6000 {
> + status = "ok";
> + };
> +
> + stereo0: stereo@...9000 {
> + status = "ok";
> + };
> +
> + stereo1: stereo@...b000 {
> + status = "ok";
> + };
> +
> + stereo2: stereo@...d000 {
> + status = "ok";
> + };
> +
> + stereo3: stereo@...f000 {
> + status = "ok";
> + };
> +
> + /* Enable Audio Interfaces */
> + i2s: ipq4019-pcm-i2s@0 {
> + status = "ok";
> + };
> +
> + i2splatform: qca-pcm-i2s@...9000 {
> + status = "ok";
> + };
> +
> + i2s1platform: qca-pcm-i2s1@...b000 {
> + status = "ok";
> + };
> +
> + i2s1: ipq4019-pcm-i2s1@0 {
> + status = "ok";
> + };
> +
> + i2s2platform: qca-pcm-i2s2@...d000 {
> + status = "ok";
> + };
> +
> + i2s2: ipq4019-pcm-i2s2@0 {
> + status = "ok";
> + };
> +
> + tdmplatform: qca-pcm-tdm@...9000 {
> + status = "ok";
> + };
> +
> + tdm: tdm@0 {
> + status = "ok";
> + };
> +
> + spdifplatform: qca-pcm-spdif@...7000 {
> + status = "ok";
> + };
> +
> + spdif: spdif@0 {
> + status = "ok";
> + };
> +
> + sound: sound@0 {
> + pinctrl-0 = <&audio_pins>;
> + pinctrl-names = "default";
> + status = "ok";
> + };
> +
> + i2c_0: i2c@...7000 { /* BLSP1 QUP2 */
> + status = "ok";
> +
> + qca_codec: qca_codec@12 {
> + status = "ok";
> + };
> + };
> };
> };
> diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
> index 5c08d19..e2b4810 100644
> --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
> @@ -1,5 +1,5 @@
> /*
> - * Copyright (c) 2015, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
> *
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License version 2 and
> @@ -15,6 +15,8 @@
>
> #include "skeleton.dtsi"
> #include <dt-bindings/clock/qcom,gcc-ipq4019.h>
> +#include <dt-bindings/clock/qca,adcc-ipq4019.h>
> +#include <dt-bindings/sound/ipq4019-audio.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/interrupt-controller/irq.h>
>
> @@ -90,6 +92,21 @@
> clock-frequency = <32768>;
> #clock-cells = <0>;
> };
> +
> + xo: xo {
> + compatible = "fixed-clock";
> + clock-frequency = <48000000>;
> + #clock-cells = <0>;
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv7-timer";
> + interrupts = <1 2 0xf08>,
> + <1 3 0xf08>,
> + <1 4 0xf08>,
> + <1 1 0xf08>;
> + clock-frequency = <48000000>;
> };
>
> soc {
> @@ -156,8 +173,13 @@
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> - };
>
> + qca_codec: qca_codec@12 {
> + compatible = "qca,ipq4019-codec";
> + reg = <0x12>;
> + status = "disabled";
> + };
> + };
>
> cryptobam: dma@...4000 {
> compatible = "qcom,bam-v1.7.0";
> @@ -263,5 +285,226 @@
> compatible = "qcom,pshold";
> reg = <0x4ab000 0x4>;
> };
> +
> + adcc: clock-controller@...0038 {
> + compatible = "qcom,adcc-ipq4019";
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + reg = <0x7700038 0x1DC>;
> + status = "disabled";
> + };
> +
> + audio: audio@...0000 {
> + compatible = "qca,ipq4019-audio-adss";
> + reg = <0x7700000 0x34>,
> + <0x7707000 0x20>;
> + resets = <&gcc AUDIO_BLK_ARES>;
> + reset-names = "blk_rst";
> + status = "disabled";
> + };
> +
> + pcm: pcm@...4000 {
> + compatible = "qca,ipq4019-pcm";
> + reg = <0x7704000 0x2000>;
> + dma-tx-channel = <MBOX3_TX_ID>;
> + dma-rx-channel = <MBOX0_RX_ID>;
> + stereo-tx-port = <STEREO3_ID>;
> + stereo-rx-port = <STEREO0_ID>;
> + clocks = <&adcc ADCC_PCM_CLK_SRC>;
> + clock-names = "audio_pcm_clk";
> + status = "disabled";
> + };
> +
> + mbox0: mbox@...8000 {
> + dma-index = <0>;
> + compatible = "qca,ipq4019-mbox";
> + reg = <0x7708000 0x1000>;
> + interrupts = <0 156 0>;
> + tx-channel = <MBOX0_TX_ID>;
> + rx-channel = <MBOX0_RX_ID>;
> + status = "disabled";
> + };
> +
> + mbox1: mbox@...a000 {
> + dma-index = <1>;
> + compatible = "qca,ipq4019-mbox";
> + reg = <0x770A000 0x1000>;
> + interrupts = <0 157 0>;
> + tx-channel = <MBOX1_TX_ID>;
> + status = "disabled";
> + };
> +
> + mbox2: mbox@...c000 {
> + dma-index = <2>;
> + compatible = "qca,ipq4019-mbox";
> + reg = <0x770C000 0x1000>;
> + interrupts = <0 158 0>;
> + tx-channel = <MBOX2_TX_ID>;
> + status = "disabled";
> + };
> +
> + mbox3: mbox@...e000 {
> + dma-index = <3>;
> + compatible = "qca,ipq4019-mbox";
> + reg = <0x770E000 0x1000>;
> + interrupts = <0 159 0>;
> + tx-channel = <MBOX3_TX_ID>;
> + rx-channel = <MBOX3_RX_ID>;
> + status = "disabled";
> + };
> +
> + mbox4: mbox@...6000 {
> + dma-index = <4>;
> + compatible = "qca,ipq4019-mbox";
> + reg = <0x7706000 0x1000>;
> + interrupts = <0 163 0>;
> + rx-channel = <MBOX_SPDIF_RX_ID>;
> + status = "disabled";
> + };
> +
> + stereo0: stereo@...9000 {
> + stereo-index = <STEREO0_ID>;
> + compatible = "qca,ipq4019-stereo";
> + reg = <0x7709000 0x1000>;
> + status = "disabled";
> + };
> +
> + stereo1: stereo@...b000 {
> + stereo-index = <STEREO1_ID>;
> + compatible = "qca,ipq4019-stereo";
> + reg = <0x770B000 0x1000>;
> + status = "disabled";
> + };
> +
> + stereo2: stereo@...d000 {
> + stereo-index = <STEREO2_ID>;
> + compatible = "qca,ipq4019-stereo";
> + reg = <0x770D000 0x1000>;
> + status = "disabled";
> + };
> +
> + stereo3: stereo@...f000 {
> + stereo-index = <STEREO3_ID>;
> + compatible = "qca,ipq4019-stereo";
> + reg = <0x770F000 0x1000>;
> + status = "disabled";
> + };
> +
> + i2splatform: qca-pcm-i2s@...9000 {
> + compatible = "qca,ipq4019-pcm-i2s";
> + reg = <0x7709000 0x1000>;
> + status = "disabled";
> + };
> +
> + i2s: ipq4019-pcm-i2s@0 {
> + compatible = "qca,ipq4019-i2s";
> + dma-tx-channel = <MBOX0_TX_ID>;
> + stereo-tx-port = <STEREO0_ID>;
> + dma-rx-channel = <MBOX3_RX_ID>;
> + stereo-rx-port = <STEREO3_ID>;
> + clocks = <&adcc ADCC_TXB_CLK_SRC>,
> + <&adcc ADCC_TXM_CLK_SRC>,
> + <&adcc ADCC_RXB_CLK_SRC>,
> + <&adcc ADCC_RXM_CLK_SRC>;
> + clock-names = "audio_tx_bclk",
> + "audio_tx_mclk",
> + "audio_rx_bclk",
> + "audio_rx_mclk";
> + status = "disabled";
> + };
> +
> + i2s1platform: qca-pcm-i2s1@...b000 {
> + compatible = "qca,ipq4019-pcm-i2s1";
> + reg = <0x770b000 0x1000>;
> + status = "disabled";
> + };
> +
> + i2s1: ipq4019-pcm-i2s1@0 {
> + compatible = "qca,ipq4019-i2s1";
> + dma-tx-channel = <MBOX1_TX_ID>;
> + stereo-tx-port = <STEREO1_ID>;
> + clocks = <&adcc ADCC_TXB_CLK_SRC>,
> + <&adcc ADCC_TXM_CLK_SRC>,
> + <&adcc ADCC_RXB_CLK_SRC>,
> + <&adcc ADCC_RXM_CLK_SRC>;
> + clock-names = "audio_tx_bclk",
> + "audio_tx_mclk",
> + "audio_rx_bclk",
> + "audio_rx_mclk";
> + status = "disabled";
> + };
> +
> + i2s2platform: qca-pcm-i2s2@...d000 {
> + compatible = "qca,ipq4019-pcm-i2s2";
> + reg = <0x770d000 0x1000>;
> + status = "disabled";
> + };
> +
> + i2s2: ipq4019-pcm-i2s2@0 {
> + compatible = "qca,ipq4019-i2s2";
> + dma-tx-channel = <MBOX2_TX_ID>;
> + stereo-tx-port = <STEREO2_ID>;
> + clocks = <&adcc ADCC_TXB_CLK_SRC>,
> + <&adcc ADCC_TXM_CLK_SRC>,
> + <&adcc ADCC_RXB_CLK_SRC>,
> + <&adcc ADCC_RXM_CLK_SRC>;
> + clock-names = "audio_tx_bclk",
> + "audio_tx_mclk",
> + "audio_rx_bclk",
> + "audio_rx_mclk";
> + status = "disabled";
> + };
> +
> + tdmplatform: qca-pcm-tdm@...9000 {
> + compatible = "qca,ipq4019-pcm-tdm";
> + reg = <0x7709000 0x1000>;
> + status = "disabled";
> + };
> +
> + tdm: tdm@0 {
> + compatible = "qca,ipq4019-tdm";
> + dma-tx-channel = <MBOX0_TX_ID>;
> + dma-rx-channel = <MBOX3_RX_ID>;
> + stereo-tx-port = <STEREO0_ID>;
> + stereo-rx-port = <STEREO3_ID>;
> + clocks = <&adcc ADCC_TXB_CLK_SRC>,
> + <&adcc ADCC_TXM_CLK_SRC>,
> + <&adcc ADCC_RXB_CLK_SRC>,
> + <&adcc ADCC_RXM_CLK_SRC>;
> + clock-names = "audio_tx_bclk",
> + "audio_tx_mclk",
> + "audio_rx_bclk",
> + "audio_rx_mclk";
> + status = "disabled";
> + };
> +
> + spdifplatform: qca-pcm-spdif@...7000 {
> + compatible = "qca,ipq4019-pcm-spdif";
> + reg = <0x7707000 0x1000>;
> + status = "disabled";
> + };
> +
> + spdif: spdif@0 {
> + compatible = "qca,ipq4019-spdif";
> + dma-tx-channel = <MBOX0_TX_ID>;
> + dma-rx-channel = <MBOX_SPDIF_RX_ID>;
> + stereo-tx-port = <STEREO0_ID>;
> + clocks = <&adcc ADCC_TXB_CLK_SRC>,
> + <&adcc ADCC_TXM_CLK_SRC>,
> + <&adcc ADCC_SPDIF_SRC>,
> + <&adcc ADCC_SPDIFDIV2_SRC >,
> + <&adcc ADCC_AUDIO_SPDIFINFAST_SRC>;
> + clock-names = "audio_tx_bclk",
> + "audio_tx_mclk",
> + "audio_spdif_src",
> + "audio_spdif_div2",
> + "audio_spdifinfast_src";
> + status = "disabled";
> + };
> +
> + sound: sound@0 {
> + compatible = "qca,ipq4019-audio";
> + status = "disabled";
> + };
> };
> };
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
Powered by blists - more mailing lists