[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20160715202313.GA3509@hector.attlocal.net>
Date: Fri, 15 Jul 2016 15:23:13 -0500
From: Andy Gross <andy.gross@...aro.org>
To: njaigane@...eaurora.org
Cc: linux-arm-msm@...r.kernel.org, linux@....qualcomm.com,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-soc@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
twp@...eaurora.org, david.brown@...aro.org, robh+dt@...nel.org,
pawel.moll@....com, mark.rutland@....com,
ijc+devicetree@...lion.org.uk, galak@...eaurora.org,
linux@...linux.org.uk, mturquette@...libre.com,
sboyd@...eaurora.org, linus.walleij@...aro.org,
plai@...eaurora.org, bgoswami@...eaurora.org, lgirdwood@...il.com,
broonie@...nel.org, perex@...ex.cz, tiwai@...e.com,
bjorn.andersson@...aro.org, varada@...eaurora.org,
pradeepb@...eaurora.org, snlakshm@...eaurora.org,
linux-clk@...r.kernel.org, linux-gpio@...r.kernel.org,
alsa-devel@...a-project.org, bselvara@...eaurora.org
Subject: Re: [PATCH 3/4] qcom: ipq4019: ASoC tlmm/pinctrl support
On Fri, Jul 15, 2016 at 12:37:05PM +0530, njaigane@...eaurora.org wrote:
> From: Jaiganesh Narayanan <njaigane@...eaurora.org>
>
> This patch adds the tlmm/pinctrl support for IPQ4019 ASoC.
>
> Signed-off-by: Jaiganesh Narayanan <njaigane@...eaurora.org>
> ---
> drivers/pinctrl/qcom/pinctrl-ipq4019.c | 116 +++++++++++++++++++++++++--------
> 1 file changed, 88 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/pinctrl/qcom/pinctrl-ipq4019.c b/drivers/pinctrl/qcom/pinctrl-ipq4019.c
> index b68ae42..bc22597 100644
> --- a/drivers/pinctrl/qcom/pinctrl-ipq4019.c
> +++ b/drivers/pinctrl/qcom/pinctrl-ipq4019.c
> @@ -1,5 +1,5 @@
> /*
> - * Copyright (c) 2015, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
> *
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License version 2 and
> @@ -283,6 +283,18 @@ enum ipq4019_functions {
> qca_mux_blsp_uart0,
> qca_mux_blsp_spi1,
> qca_mux_blsp_spi0,
> + qca_mux_i2s_rx_mclk,
> + qca_mux_i2s_rx_bclk,
> + qca_mux_i2s_rx_fsync,
> + qca_mux_i2s_rxd,
> + qca_mux_i2s_tx_mclk,
> + qca_mux_i2s_tx_bclk,
> + qca_mux_i2s_tx_fsync,
> + qca_mux_i2s_txd1,
> + qca_mux_i2s_txd2,
> + qca_mux_i2s_txd3,
> + qca_mux_i2s_spdif_out,
> + qca_mux_i2s_spdif_in,
You'll also need to add all of these to the
Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
I was also going to suggest just using qca_i2s and having a single function, but
it seems like there is at least 1 pin that supports more than one i2s mode.
Regards,
Andy
Powered by blists - more mailing lists