linux-kernel - Re: running "make dtbs" for test builds

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20160718122947.GA29820@wfg-t540p.sh.intel.com>
Date:	Mon, 18 Jul 2016 20:29:47 +0800
From:	Fengguang Wu <lkp@...el.com>
To:	Arnd Bergmann <arnd@...db.de>
Cc:	linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	Thierry Reding <thierry.reding@...il.com>,
	devicetree@...r.kernel.org,
	linux-kbuild <linux-kbuild@...r.kernel.org>
Subject: Re: running "make dtbs" for test builds

Hi Arnd,

On Mon, Jul 18, 2016 at 02:01:17PM +0200, Arnd Bergmann wrote:
>Hi Fengguang,
>
>I've recently run into a number of cases in which I pulled a branch that
>was building fine with "make vmlinux", but that failed for "make dtbs",
>and I wonder if this is something that could be checked by the kbuild
>test robot so we catch it earlier.

Yes, sure.

>There are parts of this:
>
>- running "make" without a target will build the default image file
>  and also do the "dtbs" target on ARM and other architectures. I
>  don't know if this is what you do, or if you always build

My typical build command sequences are

        make oldnoconfig
        make prepare
        make headers_install
        make ARCH=xxx
        make install

So it looks good already. :)

>  "make vmlinux ; make modules", which doesn't include it.
>  The dtbs makefile target is available on arc, arm, arm64, h8300,
>  metag, mips, nios2, and xtensa but not the others, so if you
>  call it explicitly, that has to be in an architecture specific
>  way.

Got it.

>- setting CONFIG_OF_ALL_DTBS will catch all files, not just the
>  ones that are built by default for the set of configurations you
>  have. It's possible to simply override this on the command line,
>  using "make CONFIG_OF_ALL_DTBS=y", it doesn't actually have to
>  be part of the configuration. The result is independent of the
>  actual configuration, so it should be enough to do this once
>  per architecture and source revision.
>
>Is this something you can add?

Do you mean to simply change the main "make" command line to

        make ARCH=xxx CONFIG_OF_ALL_DTBS=y

Which looks safe even for ARCHs that do not support it.

The arch/.../Makefile that actually use it are:

        arch/arc/boot/dts/Makefile
        arch/arm/boot/dts/Makefile
        arch/arm64/boot/dts/Makefile
        arch/h8300/boot/dts/Makefile
        arch/metag/boot/dts/Makefile
        arch/mips/boot/dts/Makefile
        arch/xtensa/boot/dts/Makefile

Regards,
Fengguang