linux-kernel - Re: [PATCH v6 1/4] Documentation: mfd: LP873X: Add information for the mfd driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20160809125037.GE5243@dell>
Date:	Tue, 9 Aug 2016 13:50:37 +0100
From:	Lee Jones <lee.jones@...aro.org>
To:	Keerthy <j-keerthy@...com>
Cc:	broonie@...nel.org, tony@...mide.com, linus.walleij@...aro.org,
	gnurou@...il.com, linux-omap@...r.kernel.org,
	linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
	linux-gpio@...r.kernel.org, robh+dt@...nel.org
Subject: Re: [PATCH v6 1/4] Documentation: mfd: LP873X: Add information for
 the mfd driver

On Mon, 08 Aug 2016, Keerthy wrote:

> The lp873x series of PMICs have a bunch of regulators and a couple
> of GPO(General Purpose Outputs).
> Add information for the MFD and regulator drivers.
> 
> Acked-by: Rob Herring <robh@...nel.org>
> Signed-off-by: Keerthy <j-keerthy@...com>

These should be in chronological order.  Rob could not have Acked the
patch before you sent it.

> ---
> Changes in v6:
> 
>   * Added more formating for properties.
> 
> Changes in v4:
> 
>   * Added the GPIO properties.
> 
> Changes in v3:
> 
>   * Changed the example node lable to pmic from lp8733.
> 
>  Documentation/devicetree/bindings/mfd/lp873x.txt | 59 ++++++++++++++++++++++++
>  1 file changed, 59 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/lp873x.txt

Patch looks good though.

I'll fix the nit above.

Applied, thanks.

> diff --git a/Documentation/devicetree/bindings/mfd/lp873x.txt b/Documentation/devicetree/bindings/mfd/lp873x.txt
> new file mode 100644
> index 0000000..1377c25
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/lp873x.txt
> @@ -0,0 +1,59 @@
> +TI LP873X PMIC MFD driver
> +
> +Required properties:
> +  - compatible:	"ti,lp8732", "ti,lp8733"
> +  - reg:		I2C slave address.
> +  - gpio-controller:	Marks the device node as a GPIO Controller.
> +  - #gpio-cells:	Should be two.  The first cell is the pin number and
> +			the second cell is used to specify flags.
> +			See ../gpio/gpio.txt for more information.
> +  - regulators:	List of child nodes that specify the regulator
> +			initialization data.
> +Example:
> +
> +pmic: lp8733@60 {
> +	compatible = "ti,lp8733";
> +	reg = <0x60>;
> +	gpio-controller;
> +	#gpio-cells = <2>;
> +
> +	regulators {
> +		lp8733_buck0: buck0 {
> +			regulator-name = "lp8733-buck0";
> +			regulator-min-microvolt = <800000>;
> +			regulator-max-microvolt = <1400000>;
> +			regulator-min-microamp = <1500000>;
> +			regulator-max-microamp = <4000000>;
> +			regulator-ramp-delay = <10000>;
> +			regulator-always-on;
> +			regulator-boot-on;
> +		};
> +
> +		lp8733_buck1: buck1 {
> +			regulator-name = "lp8733-buck1";
> +			regulator-min-microvolt = <800000>;
> +			regulator-max-microvolt = <1400000>;
> +			regulator-min-microamp = <1500000>;
> +			regulator-max-microamp = <4000000>;
> +			regulator-ramp-delay = <10000>;
> +			regulator-boot-on;
> +			regulator-always-on;
> +		};
> +
> +		lp8733_ldo0: ldo0 {
> +			regulator-name = "lp8733-ldo0";
> +			regulator-min-microvolt = <800000>;
> +			regulator-max-microvolt = <3000000>;
> +			regulator-boot-on;
> +			regulator-always-on;
> +		};
> +
> +		lp8733_ldo1: ldo1 {
> +			regulator-name = "lp8733-ldo1";
> +			regulator-min-microvolt = <800000>;
> +			regulator-max-microvolt = <3000000>;
> +			regulator-always-on;
> +			regulator-boot-on;
> +		};
> +	};
> +};

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog