| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20160809125347.GF5243@dell>
Date: Tue, 9 Aug 2016 13:53:47 +0100
From: Lee Jones <lee.jones@...aro.org>
To: Keerthy <j-keerthy@...com>
Cc: broonie@...nel.org, tony@...mide.com, linus.walleij@...aro.org,
gnurou@...il.com, linux-omap@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-gpio@...r.kernel.org, robh+dt@...nel.org
Subject: Re: [PATCH v6 2/4] mfd: lp873x: Add lp873x PMIC support
On Mon, 08 Aug 2016, Keerthy wrote:
> The LP873X chip is a power management IC for Portable Navigation Systems
> and Tablet Computing devices. It contains the following components:
>
> - Regulators.
> - Configurable General Purpose Output Signals(GPO).
>
> PMIC interacts with the main processor through i2c. PMIC has
> couple of LDOs(Linear Regulators), couple of BUCKs (Step-Down DC-DC
> Converter Cores) and GPOs(General Purpose Output Signals).
>
> Signed-off-by: Keerthy <j-keerthy@...com>
> ---
> Changes in v6:
>
> * Rebased on top of http://www.gossamer-threads.com/lists/linux/kernel/2457552.
> * Hence added probe_new instead of probe and removed unused i2c_device_id.
No, please don't do that. This patch-set is blocked.
Please rebase on top of a mainline release and re-send.
We still need the I2C table, for now.
> Changes in v4:
>
> * Added Author.
> * Added the mfd_cell for gpio.
>
> Changes in v3:
>
> * Reordered the probe code.
> * Fixed Typo in Kconfig description.
> * Removed unused member from struct lp873x.
>
> drivers/mfd/Kconfig | 14 +++
> drivers/mfd/Makefile | 2 +
> drivers/mfd/lp873x.c | 89 +++++++++++++++
> include/linux/mfd/lp873x.h | 264 +++++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 369 insertions(+)
> create mode 100644 drivers/mfd/lp873x.c
> create mode 100644 include/linux/mfd/lp873x.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 2d1fb64..45fe00a 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -1224,6 +1224,20 @@ config MFD_TPS65217
> This driver can also be built as a module. If so, the module
> will be called tps65217.
>
> +config MFD_TI_LP873X
> + tristate "TI LP873X Power Management IC"
> + depends on I2C
> + select MFD_CORE
> + select REGMAP_I2C
> + help
> + If you say yes here then you get support for the LP873X series of
> + Power Management Integrated Circuits(PMIC).
> + These include voltage regulators, Thermal protection, Configurable
> + General Purpose Outputs(GPO) that are used in portable devices.
> +
> + This driver can also be built as a module. If so, the module
> + will be called lp873x.
> +
> config MFD_TPS65218
> tristate "TI TPS65218 Power Management chips"
> depends on I2C
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 2ba3ba3..42acbcd 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -22,6 +22,8 @@ obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o
> obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o
> obj-$(CONFIG_HTC_I2CPLD) += htc-i2cpld.o
>
> +obj-$(CONFIG_MFD_TI_LP873X) += lp873x.o
> +
> obj-$(CONFIG_MFD_DAVINCI_VOICECODEC) += davinci_voicecodec.o
> obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o
> obj-$(CONFIG_MFD_TI_AM335X_TSCADC) += ti_am335x_tscadc.o
> diff --git a/drivers/mfd/lp873x.c b/drivers/mfd/lp873x.c
> new file mode 100644
> index 0000000..3c8e8d0
> --- /dev/null
> +++ b/drivers/mfd/lp873x.c
> @@ -0,0 +1,89 @@
> +/*
> + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
> + *
> + * Author: Keerthy <j-keerthy@...com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/interrupt.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +
> +#include <linux/mfd/lp873x.h>
> +
> +static const struct regmap_config lp873x_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = LP873X_REG_MAX,
> +};
> +
> +static const struct mfd_cell lp873x_cells[] = {
> + { .name = "lp873x-regulator", },
> + { .name = "lp873x-gpio", },
> +};
> +
> +static int lp873x_probe(struct i2c_client *client)
> +{
> + struct lp873x *lp873;
> + int ret;
> + unsigned int otpid;
> +
> + lp873 = devm_kzalloc(&client->dev, sizeof(*lp873), GFP_KERNEL);
> + if (!lp873)
> + return -ENOMEM;
> +
> + lp873->dev = &client->dev;
> +
> + lp873->regmap = devm_regmap_init_i2c(client, &lp873x_regmap_config);
> + if (IS_ERR(lp873->regmap)) {
> + ret = PTR_ERR(lp873->regmap);
> + dev_err(lp873->dev,
> + "Failed to initialize register map: %d\n", ret);
> + return ret;
> + }
> +
> + mutex_init(&lp873->lock);
> +
> + ret = regmap_read(lp873->regmap, LP873X_REG_OTP_REV, &otpid);
> + if (ret) {
> + dev_err(lp873->dev, "Failed to read OTP ID\n");
> + return ret;
> + }
> +
> + lp873->rev = otpid & LP873X_OTP_REV_OTP_ID;
> + i2c_set_clientdata(client, lp873);
> + ret = mfd_add_devices(lp873->dev, PLATFORM_DEVID_AUTO, lp873x_cells,
> + ARRAY_SIZE(lp873x_cells), NULL, 0, NULL);
> +
> + return ret;
> +}
> +
> +static const struct of_device_id of_lp873x_match_table[] = {
> + { .compatible = "ti,lp8733", },
> + { .compatible = "ti,lp8732", },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, of_lp873x_match_table);
> +
> +static struct i2c_driver lp873x_driver = {
> + .driver = {
> + .name = "lp873x",
> + .of_match_table = of_lp873x_match_table,
> + },
> + .probe_new = lp873x_probe,
> +};
> +module_i2c_driver(lp873x_driver);
> +
> +MODULE_AUTHOR("J Keerthy <j-keerthy@...com>");
> +MODULE_DESCRIPTION("LP873X chip family multi-function driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/mfd/lp873x.h b/include/linux/mfd/lp873x.h
> new file mode 100644
> index 0000000..42bebfa
> --- /dev/null
> +++ b/include/linux/mfd/lp873x.h
> @@ -0,0 +1,264 @@
> +/*
> + * Functions to access LP873X power management chip.
> + *
> + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __LINUX_MFD_LP873X_H
> +#define __LINUX_MFD_LP873X_H
> +
> +#include <linux/i2c.h>
> +#include <linux/regulator/driver.h>
> +#include <linux/regulator/machine.h>
> +
> +/* LP873x chip id list */
> +#define LP873X 0x00
> +
> +/* All register addresses */
> +#define LP873X_REG_DEV_REV 0X00
> +#define LP873X_REG_OTP_REV 0X01
> +#define LP873X_REG_BUCK0_CTRL_1 0X02
> +#define LP873X_REG_BUCK0_CTRL_2 0X03
> +#define LP873X_REG_BUCK1_CTRL_1 0X04
> +#define LP873X_REG_BUCK1_CTRL_2 0X05
> +#define LP873X_REG_BUCK0_VOUT 0X06
> +#define LP873X_REG_BUCK1_VOUT 0X07
> +#define LP873X_REG_LDO0_CTRL 0X08
> +#define LP873X_REG_LDO1_CTRL 0X09
> +#define LP873X_REG_LDO0_VOUT 0X0A
> +#define LP873X_REG_LDO1_VOUT 0X0B
> +#define LP873X_REG_BUCK0_DELAY 0X0C
> +#define LP873X_REG_BUCK1_DELAY 0X0D
> +#define LP873X_REG_LDO0_DELAY 0X0E
> +#define LP873X_REG_LDO1_DELAY 0X0F
> +#define LP873X_REG_GPO_DELAY 0X10
> +#define LP873X_REG_GPO2_DELAY 0X11
> +#define LP873X_REG_GPO_CTRL 0X12
> +#define LP873X_REG_CONFIG 0X13
> +#define LP873X_REG_PLL_CTRL 0X14
> +#define LP873X_REG_PGOOD_CTRL1 0X15
> +#define LP873X_REG_PGOOD_CTRL2 0X16
> +#define LP873X_REG_PG_FAULT 0X17
> +#define LP873X_REG_RESET 0X18
> +#define LP873X_REG_INT_TOP_1 0X19
> +#define LP873X_REG_INT_TOP_2 0X1A
> +#define LP873X_REG_INT_BUCK 0X1B
> +#define LP873X_REG_INT_LDO 0X1C
> +#define LP873X_REG_TOP_STAT 0X1D
> +#define LP873X_REG_BUCK_STAT 0X1E
> +#define LP873X_REG_LDO_STAT 0x1F
> +#define LP873X_REG_TOP_MASK_1 0x20
> +#define LP873X_REG_TOP_MASK_2 0x21
> +#define LP873X_REG_BUCK_MASK 0x22
> +#define LP873X_REG_LDO_MASK 0x23
> +#define LP873X_REG_SEL_I_LOAD 0x24
> +#define LP873X_REG_I_LOAD_2 0x25
> +#define LP873X_REG_I_LOAD_1 0x26
> +
> +#define LP873X_REG_MAX LP873X_REG_I_LOAD_1
> +
> +/* Register field definitions */
> +#define LP873X_DEV_REV_DEV_ID 0xC0
> +#define LP873X_DEV_REV_ALL_LAYER 0x30
> +#define LP873X_DEV_REV_METAL_LAYER 0x0F
> +
> +#define LP873X_OTP_REV_OTP_ID 0xFF
> +
> +#define LP873X_BUCK0_CTRL_1_BUCK0_FPWM BIT(3)
> +#define LP873X_BUCK0_CTRL_1_BUCK0_RDIS_EN BIT(2)
> +#define LP873X_BUCK0_CTRL_1_BUCK0_EN_PIN_CTRL BIT(1)
> +#define LP873X_BUCK0_CTRL_1_BUCK0_EN BIT(0)
> +
> +#define LP873X_BUCK0_CTRL_2_BUCK0_ILIM 0x38
> +#define LP873X_BUCK0_CTRL_2_BUCK0_SLEW_RATE 0x07
> +
> +#define LP873X_BUCK1_CTRL_1_BUCK1_FPWM BIT(3)
> +#define LP873X_BUCK1_CTRL_1_BUCK1_RDIS_EN BIT(2)
> +#define LP873X_BUCK1_CTRL_1_BUCK1_EN_PIN_CTRL BIT(1)
> +#define LP873X_BUCK1_CTRL_1_BUCK1_EN BIT(0)
> +
> +#define LP873X_BUCK1_CTRL_2_BUCK1_ILIM 0x38
> +#define LP873X_BUCK1_CTRL_2_BUCK1_SLEW_RATE 0x07
> +
> +#define LP873X_BUCK0_VOUT_BUCK0_VSET 0xFF
> +
> +#define LP873X_BUCK1_VOUT_BUCK1_VSET 0xFF
> +
> +#define LP873X_LDO0_CTRL_LDO0_RDIS_EN BIT(2)
> +#define LP873X_LDO0_CTRL_LDO0_EN_PIN_CTRL BIT(1)
> +#define LP873X_LDO0_CTRL_LDO0_EN BIT(0)
> +
> +#define LP873X_LDO1_CTRL_LDO1_RDIS_EN BIT(2)
> +#define LP873X_LDO1_CTRL_LDO1_EN_PIN_CTRL BIT(1)
> +#define LP873X_LDO1_CTRL_LDO1_EN BIT(0)
> +
> +#define LP873X_LDO0_VOUT_LDO0_VSET 0x1F
> +
> +#define LP873X_LDO1_VOUT_LDO1_VSET 0x1F
> +
> +#define LP873X_BUCK0_DELAY_BUCK0_SD_DELAY 0xF0
> +#define LP873X_BUCK0_DELAY_BUCK0_SU_DELAY 0x0F
> +
> +#define LP873X_BUCK1_DELAY_BUCK1_SD_DELAY 0xF0
> +#define LP873X_BUCK1_DELAY_BUCK1_SU_DELAY 0x0F
> +
> +#define LP873X_LDO0_DELAY_LDO0_SD_DELAY 0xF0
> +#define LP873X_LDO0_DELAY_LDO0_SU_DELAY 0x0F
> +
> +#define LP873X_LDO1_DELAY_LDO1_SD_DELAY 0xF0
> +#define LP873X_LDO1_DELAY_LDO1_SU_DELAY 0x0F
> +
> +#define LP873X_GPO_DELAY_GPO_SD_DELAY 0xF0
> +#define LP873X_GPO_DELAY_GPO_SU_DELAY 0x0F
> +
> +#define LP873X_GPO2_DELAY_GPO2_SD_DELAY 0xF0
> +#define LP873X_GPO2_DELAY_GPO2_SU_DELAY 0x0F
> +
> +#define LP873X_GPO_CTRL_GPO2_OD BIT(6)
> +#define LP873X_GPO_CTRL_GPO2_EN_PIN_CTRL BIT(5)
> +#define LP873X_GPO_CTRL_GPO2_EN BIT(4)
> +#define LP873X_GPO_CTRL_GPO_OD BIT(2)
> +#define LP873X_GPO_CTRL_GPO_EN_PIN_CTRL BIT(1)
> +#define LP873X_GPO_CTRL_GPO_EN BIT(0)
> +
> +#define LP873X_CONFIG_SU_DELAY_SEL BIT(6)
> +#define LP873X_CONFIG_SD_DELAY_SEL BIT(5)
> +#define LP873X_CONFIG_CLKIN_PIN_SEL BIT(4)
> +#define LP873X_CONFIG_CLKIN_PD BIT(3)
> +#define LP873X_CONFIG_EN_PD BIT(2)
> +#define LP873X_CONFIG_TDIE_WARN_LEVEL BIT(1)
> +#define LP873X_EN_SPREAD_SPEC BIT(0)
> +
> +#define LP873X_PLL_CTRL_EN_PLL BIT(6)
> +#define LP873X_EXT_CLK_FREQ 0x1F
> +
> +#define LP873X_PGOOD_CTRL1_PGOOD_POL BIT(7)
> +#define LP873X_PGOOD_CTRL1_PGOOD_OD BIT(6)
> +#define LP873X_PGOOD_CTRL1_PGOOD_WINDOW_LDO BIT(5)
> +#define LP873X_PGOOD_CTRL1_PGOOD_WINDOWN_BUCK BIT(4)
> +#define LP873X_PGOOD_CTRL1_PGOOD_EN_PGOOD_LDO1 BIT(3)
> +#define LP873X_PGOOD_CTRL1_PGOOD_EN_PGOOD_LDO0 BIT(2)
> +#define LP873X_PGOOD_CTRL1_PGOOD_EN_PGOOD_BUCK1 BIT(1)
> +#define LP873X_PGOOD_CTRL1_PGOOD_EN_PGOOD_BUCK0 BIT(0)
> +
> +#define LP873X_PGOOD_CTRL2_EN_PGOOD_TWARN BIT(2)
> +#define LP873X_PGOOD_CTRL2_EN_PG_FAULT_GATE BIT(1)
> +#define LP873X_PGOOD_CTRL2_PGOOD_MODE BIT(0)
> +
> +#define LP873X_PG_FAULT_PG_FAULT_LDO1 BIT(3)
> +#define LP873X_PG_FAULT_PG_FAULT_LDO0 BIT(2)
> +#define LP873X_PG_FAULT_PG_FAULT_BUCK1 BIT(1)
> +#define LP873X_PG_FAULT_PG_FAULT_BUCK0 BIT(0)
> +
> +#define LP873X_RESET_SW_RESET BIT(0)
> +
> +#define LP873X_INT_TOP_1_PGOOD_INT BIT(7)
> +#define LP873X_INT_TOP_1_LDO_INT BIT(6)
> +#define LP873X_INT_TOP_1_BUCK_INT BIT(5)
> +#define LP873X_INT_TOP_1_SYNC_CLK_INT BIT(4)
> +#define LP873X_INT_TOP_1_TDIE_SD_INT BIT(3)
> +#define LP873X_INT_TOP_1_TDIE_WARN_INT BIT(2)
> +#define LP873X_INT_TOP_1_OVP_INT BIT(1)
> +#define LP873X_INT_TOP_1_I_MEAS_INT BIT(0)
> +
> +#define LP873X_INT_TOP_2_RESET_REG_INT BIT(0)
> +
> +#define LP873X_INT_BUCK_BUCK1_PG_INT BIT(6)
> +#define LP873X_INT_BUCK_BUCK1_SC_INT BIT(5)
> +#define LP873X_INT_BUCK_BUCK1_ILIM_INT BIT(4)
> +#define LP873X_INT_BUCK_BUCK0_PG_INT BIT(2)
> +#define LP873X_INT_BUCK_BUCK0_SC_INT BIT(1)
> +#define LP873X_INT_BUCK_BUCK0_ILIM_INT BIT(0)
> +
> +#define LP873X_INT_LDO_LDO1_PG_INT BIT(6)
> +#define LP873X_INT_LDO_LDO1_SC_INT BIT(5)
> +#define LP873X_INT_LDO_LDO1_ILIM_INT BIT(4)
> +#define LP873X_INT_LDO_LDO0_PG_INT BIT(2)
> +#define LP873X_INT_LDO_LDO0_SC_INT BIT(1)
> +#define LP873X_INT_LDO_LDO0_ILIM_INT BIT(0)
> +
> +#define LP873X_TOP_STAT_PGOOD_STAT BIT(7)
> +#define LP873X_TOP_STAT_SYNC_CLK_STAT BIT(4)
> +#define LP873X_TOP_STAT_TDIE_SD_STAT BIT(3)
> +#define LP873X_TOP_STAT_TDIE_WARN_STAT BIT(2)
> +#define LP873X_TOP_STAT_OVP_STAT BIT(1)
> +
> +#define LP873X_BUCK_STAT_BUCK1_STAT BIT(7)
> +#define LP873X_BUCK_STAT_BUCK1_PG_STAT BIT(6)
> +#define LP873X_BUCK_STAT_BUCK1_ILIM_STAT BIT(4)
> +#define LP873X_BUCK_STAT_BUCK0_STAT BIT(3)
> +#define LP873X_BUCK_STAT_BUCK0_PG_STAT BIT(2)
> +#define LP873X_BUCK_STAT_BUCK0_ILIM_STAT BIT(0)
> +
> +#define LP873X_LDO_STAT_LDO1_STAT BIT(7)
> +#define LP873X_LDO_STAT_LDO1_PG_STAT BIT(6)
> +#define LP873X_LDO_STAT_LDO1_ILIM_STAT BIT(4)
> +#define LP873X_LDO_STAT_LDO0_STAT BIT(3)
> +#define LP873X_LDO_STAT_LDO0_PG_STAT BIT(2)
> +#define LP873X_LDO_STAT_LDO0_ILIM_STAT BIT(0)
> +
> +#define LP873X_TOP_MASK_1_PGOOD_INT_MASK BIT(7)
> +#define LP873X_TOP_MASK_1_SYNC_CLK_MASK BIT(4)
> +#define LP873X_TOP_MASK_1_TDIE_WARN_MASK BIT(2)
> +#define LP873X_TOP_MASK_1_I_MEAS_MASK BIT(0)
> +
> +#define LP873X_TOP_MASK_2_RESET_REG_MASK BIT(0)
> +
> +#define LP873X_BUCK_MASK_BUCK1_PGF_MASK BIT(7)
> +#define LP873X_BUCK_MASK_BUCK1_PGR_MASK BIT(6)
> +#define LP873X_BUCK_MASK_BUCK1_ILIM_MASK BIT(4)
> +#define LP873X_BUCK_MASK_BUCK0_PGF_MASK BIT(3)
> +#define LP873X_BUCK_MASK_BUCK0_PGR_MASK BIT(2)
> +#define LP873X_BUCK_MASK_BUCK0_ILIM_MASK BIT(0)
> +
> +#define LP873X_LDO_MASK_LDO1_PGF_MASK BIT(7)
> +#define LP873X_LDO_MASK_LDO1_PGR_MASK BIT(6)
> +#define LP873X_LDO_MASK_LDO1_ILIM_MASK BIT(4)
> +#define LP873X_LDO_MASK_LDO0_PGF_MASK BIT(3)
> +#define LP873X_LDO_MASK_LDO0_PGR_MASK BIT(2)
> +#define LP873X_LDO_MASK_LDO0_ILIM_MASK BIT(0)
> +
> +#define LP873X_SEL_I_LOAD_CURRENT_BUCK_SELECT BIT(0)
> +
> +#define LP873X_I_LOAD_2_BUCK_LOAD_CURRENT BIT(0)
> +
> +#define LP873X_I_LOAD_1_BUCK_LOAD_CURRENT 0xFF
> +
> +#define LP873X_MAX_REG_ID LP873X_LDO_1
> +
> +/* Number of step-down converters available */
> +#define LP873X_NUM_BUCK 2
> +/* Number of LDO voltage regulators available */
> +#define LP873X_NUM_LDO 2
> +/* Number of total regulators available */
> +#define LP873X_NUM_REGULATOR (LP873X_NUM_BUCK + LP873X_NUM_LDO)
> +
> +enum lp873x_regulator_id {
> + /* BUCK's */
> + LP873X_BUCK_0,
> + LP873X_BUCK_1,
> + /* LDOs */
> + LP873X_LDO_0,
> + LP873X_LDO_1,
> +};
> +
> +/**
> + * struct lp873x - state holder for the lp873x driver
> + * Device data may be used to access the LP873X chip
> + */
> +struct lp873x {
> + struct device *dev;
> + u8 rev;
> + struct mutex lock; /* lock guarding the data structure */
> + struct regmap *regmap;
> +};
> +#endif /* __LINUX_MFD_LP873X_H */
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Powered by blists - more mailing lists