[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <57ADD052.9030000@hisilicon.com>
Date: Fri, 12 Aug 2016 14:34:10 +0100
From: Wei Xu <xuwei5@...ilicon.com>
To: John Stultz <john.stultz@...aro.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>
CC: lkml <linux-kernel@...r.kernel.org>,
Andy Yan <andy.yan@...k-chips.com>,
Haojian Zhuang <haojian.zhuang@...aro.org>,
Guodong Xu <guodong.xu@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Catalin Marinas <catalin.marinas@....com>,
"Will Deacon" <will.deacon@....com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>
Subject: Re: [RFC][PATCH 3/4] arm64: dts: hikey: Add hikey support for
syscon-reboot-mode
Hi All,
On 10/08/2016 05:58, John Stultz wrote:
> On Tue, Aug 9, 2016 at 9:34 PM, Bjorn Andersson
> <bjorn.andersson@...aro.org> wrote:
>> On Mon 08 Aug 16:03 PDT 2016, John Stultz wrote:
>>
>> [..]
>>> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
>> [..]
>>> memory@0 {
>>> device_type = "memory";
>>> reg = <0x00000000 0x00000000 0x00000000 0x05e00000>,
>>> - <0x00000000 0x05f00000 0x00000000 0x00eff000>,
>>> + <0x00000000 0x05f00000 0x00000000 0x00001000>,
>>> + <0x00000000 0x05f02000 0x00000000 0x00efd000>,
>>> <0x00000000 0x06e00000 0x00000000 0x0060f000>,
>>> <0x00000000 0x07410000 0x00000000 0x36bf0000>;
>>> };
>>
>> As I said when talked about this, I don't think you should punch holes
>> in the /memory node, but rather add these regions as no-map in a
>> /reserved-memory node. But that's a unrelated matter.
>
> Yea. I need to sync w/ Wei and Guodong to see about reworking all of
> those to use /reserved-memory, but for now I'd like to stay in sync w/
> how they have it setup.
>
Both are fine to me.
I remember before we had a discussion [1].
How about we add these functions this time and clean the memory node
in the future if needed?
[1] http://patches.linaro.org/patch/54682/
Best Regards,
Wei
>>>
>>> + reboot-mode-syscon@...1000 {
>>> + compatible = "syscon", "simple-mfd";
>>> + reg = <0x0 0x05f01000 0x0 0x00001000>;
>>> +
>>> + reboot-mode@0 {
>>
>> Drop the @0
>
> Will do.
>
>
>>
>> Other than that:
>> Acked-by: Bjorn Andersson <bjorn.andersson@...aro.org>
>
> Thanks!
> -john
>
> .
>
Powered by blists - more mailing lists